How To Install Sequential DRL Turn Signals On Q50 Q60

Рет қаралды 34,435

4 жыл бұрын

Demonstrating how to install sequential DRL turn signals with the puddle lamps as a welcoming light (sold by me). This is the proper way on how to have the puddle lamp work correctly. In the video, I said to pull inward I meant to say push the tab inward. Most people who want to install this know how to take off a door panel, but don't know where to tap into to get the proper power and ground. Overall, this should provide you a good overview on how to wire it up correctly.
If you want these lights or mirror caps I sell them much cheaper than everyone else GUARANTEED! Don’t get screwed by someone price gouging. DM me on IG.
Buy your lights here: amzn.to/41NOgV1
[Affilaite Links]
Torque Wrench: amzn.to/3tPjN7Z
Mechanic Tool Set: amzn.to/3DNIfuP
Posi taps used: amzn.to/3u8UVs0
If you're new consider subscribing!
Giveaway will be announced in the next video. Make sure to get your chance to win here! • How to install RSR spr...

Пікірлер: 110

@ZillaFullBoost 4 жыл бұрын

Hope this helps anyone looking to finally get that puddle lamp to work the way it should! If you found this video helpful take the second to 👊🏼 that 👍🏼

@directorandylous3272 2 жыл бұрын

Have you figure out the issue with puddle light?

@ZillaFullBoost 2 жыл бұрын

@@directorandylous3272 I don’t have issues with the puddle lamps 😎

@StarBoy-nb4yd 4 күн бұрын

Do you know why the drl stays on when the car is off and locked I plugged it to the purple wire but it stays on

@ZillaFullBoost 2 күн бұрын

@@StarBoy-nb4yd your lights are probably not the same as mine and the wire diagram is different or you wired it incorrectly.

@SnakeDoctor5104 3 жыл бұрын

Just did this install today. Your instructions where perfect. Took me about 5 hrs to complete both sides. After doing the first side, the other side was a lot easier. Fitment ain't bad, but there is a gap at the end of the lights, which is kind of annoying. Especially since water can enter more easily. Good idea to seal this area with some kind of rubber sealant. Much appreciated.:)

@ZillaFullBoost 3 жыл бұрын

Your comment is spot on with the install in regards to the other side being much easier. Everyone seems to have that gap there. Some clear sealant should work. I left mine with the small gap and haven’t had issues with water yet, but I do park my car in a garage. Thanks for watching!

@eternal3366 3 жыл бұрын

Thanks for the video bro. Just installed mine!!

@JamesSalomon947 2 жыл бұрын

Great install video!

@qdog1019 4 жыл бұрын

You the man bro nice video

@thaiblkman1 3 жыл бұрын

Great workmanship man.. can't wait til mine come in

@ZillaFullBoost 3 жыл бұрын

Thanks, you’re going to love them.

@thaiblkman1 3 жыл бұрын

@@ZillaFullBoost Yeah I know they come in Monday. I got you on Instagram to let me know about the honey cone Mirror overs and a price

@just.bekool2808 Жыл бұрын

Bro how did you remove that plastic cover UNDER the mirror (where the audio messed up)

@landonturner3721 Жыл бұрын

Where do you get the extra wire from???

@karolinaguy_tev6485 Жыл бұрын

Any help with with Q70 harness anyone? Please lmk. I have blue, white and black wires for my drl but I’m having trouble finding which harness gives me power

@shanna1970 3 жыл бұрын

Great video, much appreciated. My only issue is that you didn't show them on and functioning.

@brooksbrooks8060 2 жыл бұрын

??? He did in the beginning

@caznevers2281 Жыл бұрын

He didn't show that the Puddle lamps are working

@frankrodriguez8520 3 жыл бұрын

Waoo excellent👍🏻👍🏻

@BetosToyzGarage 9 ай бұрын

Great video, we go the install done and we we have hyper flas in the back tail lights any input?

@ZillaFullBoost 9 ай бұрын

I didn’t have hyperflash so not sure. I did however have tails as turn signal harness installed. Maybe that’s the difference,

@Sunnybeast16 3 жыл бұрын

Got a question, are these the same turn signals as the ones that do like a dance when you open the door? I don’t want drl on at all just want the dance thing to work when I open the door so guessing tap into the door light. Which wire would that he ?

@ZillaFullBoost 3 жыл бұрын

Yea they have a sequential pattern when opening the door, but I think that’s only on v2. That sequence is standard after plugging the turn signal wires to the oem plug.

@garagemgringa7910 3 жыл бұрын

question, in case that I want just the welcoming lights, NOT the DRL, should I just not connect the blue cable? Tks

@ZillaFullBoost 3 жыл бұрын

Correct, don't wire the blue to the purple.

@dillyrious622 4 жыл бұрын

Did you tap you tap into the power window harness for the DRL and power door locks harness for puddle lights?

@ZillaFullBoost 4 жыл бұрын

The puddle lamp goes connected to the harness for the door handle. Taps into the puddle lamp off the door handle.

@jokey_nyc2655 2 жыл бұрын

Hey I just have a question what does the green wire do and what did you do with it or where did you connect it ?

@ZillaFullBoost 2 жыл бұрын

Hey, so basically if you want the turn signal to flash like normal you'd wire that instead of the other wires. It elimates the sequential feature. You can cut it short or leave it laying in the mirror assembly.

@romel6741 4 жыл бұрын

Can you provide a link to where you purchased the mirror LED turn signals?

@ZillaFullBoost 4 жыл бұрын

I sell them. DM me on IG. ZillaFullBoost

@kandidadybeatz3341 Жыл бұрын

Can you turn the daytime running lights off on demand. Like when I shut the factory ones off by pressing the ebrake?

@ZillaFullBoost Жыл бұрын

No, not where it’s wired in the video.

@Raidel36 2 жыл бұрын

Hey can you help me out I got the front bumper sequentials with drl and I connected everything even with the resistor to the drl wire from the headlights and it hyperflashers any ideas how to fix this

@ZillaFullBoost 2 жыл бұрын

You probably wired the resistor incorrectly. Watch some videos on that so it can help you understand it.

@balesha85 4 жыл бұрын

🙏🙏🙏 very nice on point

@txq50s41 2 жыл бұрын

If I want the puddle lamps to be on while driving but only when my headlights are on/at night what’s would be the proper technique?

@ZillaFullBoost 2 жыл бұрын

Instead of wiring the drl to the harness right behind the panel you wire the puddle wire to it.

@rainmaderazo7081 3 жыл бұрын

Does that bundle of wire that goes inside that rubber grommet the same line as the puddle lights wiring? Can we just tap it outside instead of going all the way in by were the plug and play connectors are?

@ZillaFullBoost 3 жыл бұрын

Good question, I’m not 100% sure but I believe it’s from another source by the hinges.

@yodigydog 3 жыл бұрын

Did you try this? Did it work?

@tylermarinelli8411 3 жыл бұрын

I plugged my lights into all the harness like said and I can’t get the lights to work beside the sequential.

@ZillaFullBoost 3 жыл бұрын

Tyler Marinelli dm me on IG. Send me a picture or video of your wiring.

@jeivygarcia3428 3 жыл бұрын

Make sure you have continuity with the harness you made. Try tugging the wires you cut and connected maybe you have a loose connection. If you didnt use a posi tap like his then maybe the tap didnt have a proper connection. It happent to me today, i bought the clip on tap and the metal clip didnt puncture the insulation so it didnt have a proper connection. I had to strip some insulation to make it work. Cheers

@nathanielmack4716 3 жыл бұрын

Can I make my stock sequential preform like this one

@ZillaFullBoost 3 жыл бұрын

Nope

@Raidel36 2 жыл бұрын

When I wired it like this my windows don’t go up automatically like if I double click it up but they go fine down automatically did the same thing happen to yours, I wired it exactly how you did

@ZillaFullBoost 2 жыл бұрын

Hey, no mine are fine. You may have wired it incorrectly.

@jonathanalonzo5559 Жыл бұрын

Am having the same issue

@TheisPromotions 5 күн бұрын

do i HAVE to install the blue wiring? if i dont want puddle lamps??

@ZillaFullBoost 5 күн бұрын

@@TheisPromotions no you don’t

@paulo.8085 2 жыл бұрын

Question about removing the bottom cover at around 5:08 . I think it was edited out.

@ZillaFullBoost 2 жыл бұрын

What’s your question?

@paulo.8085 2 жыл бұрын

@@ZillaFullBoost how were you able to take off that bottom cover? Any screws or just flips out? I'm trying to install mirror sequentials on my qx60 (it's the same part) and it's impossible to fish the wires through

@jesthekid25 2 жыл бұрын

I have a question…so i dont want drl running all days..i just want it to function just with me unlock the door..so the drl and the puddle comes on wen i unlock or open the door just with the factory lights

@ZillaFullBoost 2 жыл бұрын

So don’t connect the blue wire to the purple. Try the blue wire to the same one for the puddle.

@jesthekid25 2 жыл бұрын

@@ZillaFullBoost what color is that

@ZillaFullBoost 2 жыл бұрын

I don’t remember, it’s in the video. I think it’s brown and gray. One is positive the other is ground.

@Lightworker44477 3 жыл бұрын

I’m interested in purchasing the sequential lights. I know you said to DM you on IG. However, I don’t have IG.

@ZillaFullBoost 3 жыл бұрын

Send me an email to: Miamiboyz305g at aol

@slowvr30 3 жыл бұрын

Hi what size Posi Taps did you use? Thanks so much!

@ZillaFullBoost 3 жыл бұрын

Just added the link to the video description. 😎

@slowvr30 3 жыл бұрын

@@ZillaFullBoost thank you so much man I appreciate all your help!

@madmikedpr 4 жыл бұрын

Does the battery of the car has to be disconnected?

@ZillaFullBoost 4 жыл бұрын

No it doesn’t.

@marklarkin98 3 жыл бұрын

Why doesn’t my purple wire have any power in it? And other wires also

@ZillaFullBoost 3 жыл бұрын

Not sure. How did you check with a multimeter?

@mrsolo4761 3 жыл бұрын

Bro I want the same mirror caps you have it looks like a bmw m style where can I get one

@ZillaFullBoost 3 жыл бұрын

I sell them bro. Message me on IG

@DG-888 3 жыл бұрын

@@ZillaFullBoost gmail?

@johndisla4861 Жыл бұрын

I did the same steps but my doesn’t do the same animation when opening the door

@ZillaFullBoost Жыл бұрын

Probably a different type of light 🤷🏽‍♂️

@vapoblue1128 2 жыл бұрын

Hey, I just did this install today and my interior and kickplate lights aren’t working, you got any idea why?

@ZillaFullBoost 2 жыл бұрын

Not sure my man. Go over your install again.

@JoseFernandez-ge9uc 3 жыл бұрын

I need some help. I think i messed up my wires because the "purple" wire for the DRL's now has no current and for some reason the gray wire next to it now has a current. When i try to connect them nothing happens. Additionally my window rolls up only in segments not continuously. Does anyone know a solution?

@paulo.8085 2 жыл бұрын

Did u ever figure out your window situation? I installed these mirror lights on my qx60 and had the same issue with windows. I had to replace my whole switch to get windows to work again.

@wizumer1 Жыл бұрын

What if I want the lights to always be on?

@wizumer1 Жыл бұрын

Where do I connect it to?

@pamelaaosorio Жыл бұрын

How would i be able to order these if still available?

@ZillaFullBoost Жыл бұрын

I no longer carry them, but you can buy them from Amazon. amzn.to/41NOgV1

@tycarter1125 4 жыл бұрын

Question bro , if I do it the quick 15 min way for sequential only , will I still get the bright white light after the turn signal goes off ?

@ZillaFullBoost 4 жыл бұрын

No. Only thing that will work would be your Amber lights which are your sequentials. You won’t have the White DRL’s nor puddle lamps.

@youngdre25 2 жыл бұрын

Where you get the mirror from

@ZillaFullBoost 2 жыл бұрын

I was selling them. I no longer sell them but you can go check out southbay_autoworkz on IG. Tell him I sent you.

@bryantmontoya9788 Жыл бұрын

I just install these a week ago everything was working fine but the DRL won’t turn off anymore even though the car is off. It never done that before

@ZillaFullBoost Жыл бұрын

Something went loose

@bryantmontoya9788 Жыл бұрын

@@ZillaFullBoost update: I removed them because my windows are all rolling down. I roll them back up and turn off my car. As I walk away an hour or 4 my windows will roll down. I know about the key fob thing but that was not triggering it.

@teckins1 2 жыл бұрын

Hey man, at 11:43 you talked about connecting it to the correct wires, what wires do you mean? Which wire should go where? Thank you!

@ZillaFullBoost 2 жыл бұрын

I believe it’s Black with gray, white with brown for the puddle lamps.

@MrRandomMate 2 жыл бұрын

@@ZillaFullBoost thank you!

@ninjachinoh5578 2 жыл бұрын

Do the posi taps need to be 18-24?

@ZillaFullBoost 2 жыл бұрын

That’s the correct gauge. I would use that one.

@ninjachinoh5578 2 жыл бұрын

@@ZillaFullBoost ok cool, if they don’t have any which gauge would you recommend?

@kevinkev1530 4 жыл бұрын

Very nice an informational, BRO HOW YOU NOT GONNA SHOW THM WORKING AT THE END smh!!!!!

@ZillaFullBoost 4 жыл бұрын

I showed them working in the beginning. Did you miss that?

@adriel298 2 жыл бұрын

Mine came with pink and white for the long ones

@ZillaFullBoost 2 жыл бұрын

Some come wired differently

@iniomtheoyaa8739 4 жыл бұрын

👍😊👍

@RawQfiddy 2 жыл бұрын

Yea I think I’ll just do the sequential turn signals. The DRL looks a bit confusing, may try to find someone to install them.

@ZillaFullBoost 2 жыл бұрын

It’s not as hard as it seems, but of course do things to which you feel confident.

@shanna1970 3 жыл бұрын

Sorry you did show them functioning in the beginning lol

@ZillaFullBoost 3 жыл бұрын

It’s cool lol

@HHHolmesakaJTR 3 жыл бұрын

My only upset after buying was that you can't take advantage of those beautiful yellow headlights while driving, only turning

@ZillaFullBoost 3 жыл бұрын

Yea that just lights up as a turn signal

@inyczgq 2 жыл бұрын

Think I’m just gonna pay someone to install it

@ZillaFullBoost 2 жыл бұрын

No worries. If you do want to give it a shot that’s what my videos for.

@domenicorusso9183 2 жыл бұрын

@@ZillaFullBoost hi how do I order the sequential mirror lights, let me know thanks Dom, I can't find you on IG.

@thetv3393 Жыл бұрын

i want to buy this light for honda civic reborn, please reply me on Instagram.