Q50 Front Sequential Signals | Complete Installation!!!

Рет қаралды 60,645

3 жыл бұрын

Here is a step by step how to for installing Front Sequential Signals on your Q50.
Big shout out to @jr_lights for getting me set with these lights! I hope this video helps a lot!! If you have any questions, feel free to leave a comment below!
Check out my other videos for more modification ideas, installations and product reviews!
Contact @jr_lights on IG or email him at jackrader@ymail.com
Some links provided are affiliate links. Purchasing through the provided affiliate links may result in this channel earning a small commission, at no additional cost to you. Links may include Amazon affiliate links or eBay Partner Network links. Thank you for your support.
Great deal on Big Brakes (Akebono): amzn.to/3dJmrH4
Check out some of my other favorite items: www.amazon.com/shop/speedcult...

Пікірлер: 262

@SpeedCultureStudios 3 жыл бұрын

If you have any questions, let me know. I try my best to get to them all. If I miss them, don’t get all pissy. I always try to circle back and catch them down the road. I have 225+ videos with questions coming from all of them so I do my best to keep up. I hope you understand!

@josee.cardona8592 3 жыл бұрын

Regarding the thing you install to prevent hyper flashing, how did you install it in the video?

@SpeedCultureStudios 3 жыл бұрын

@@josee.cardona8592 It just goes in line between the light and the power source. So the power wire for the light connects to one end of the resistor. The other end of the resistor taps into the power wire from the car.

@josee.cardona8592 3 жыл бұрын

@@SpeedCultureStudios so one end of the load resistor goes to the DRL cable and the other end goes to the emblem?

@SpeedCultureStudios 3 жыл бұрын

@@josee.cardona8592 it can. I wired it to the emblem because it was simple but it can go to the power for the fog lights

@josee.cardona8592 3 жыл бұрын

@@SpeedCultureStudios I’ll probably just do it to the emblem I alr have it set up that, I just need to add in the load resistor to stop the hyperflash

@Marrda 3 жыл бұрын

Love mine! They look so good. I picked up the tinted ones so the blend in with the 18 sport bumper. Ran the wire through all the proper areas and everything looks stick in the bay... I mean other than the CAI intakes

@mikeschaner5853 3 жыл бұрын

Just got my rgb emblem and sequential mirror signals from JrLights.. So stoke to get them on.. Good show mate

@seang3698 3 жыл бұрын

Ordered mine and waiting patiently for delivery. This video is going to help a ton. Thanks man!

@SpeedCultureStudios 3 жыл бұрын

Pretty simple install! Enjoy

@agustinarrona95 3 жыл бұрын

How much did you pay? Tried getting ahold of jr_lights on Instagram and haven't gotten a response

@andrewcarey7540 3 жыл бұрын

Great install man, thanks for posting.

@airwreckbee313 3 жыл бұрын

Another great install vid! I'm looking to upgrade the front and mirror turn signals, the rear bumper reflector for sequential signals, and add a lighted grill emblem on my Q70. Just got to make sure sizes are same as the Q50.

@youngjefe7496 Жыл бұрын

Whassup bro I just got my Q70 and looking to do the same. Did you ever do those upgrades if so, were they the same sizes as a Q50 ? It's tuff looking for q70 mods

@thaiblkman1 3 жыл бұрын

Yeah I just ordered mind to wait no mine he sent them out yesterday .. I've been wanting to get these two just put another great look to the front

@msblueq6052 3 жыл бұрын

Best q50 KZfaqr no doubt

@SpeedCultureStudios 3 жыл бұрын

😃Thanks a lot!!

@miguelq5048 3 жыл бұрын

Finally someone uploaded a vid on these had em for a money just didn’t know how to install em thank you

@SpeedCultureStudios 3 жыл бұрын

Excellent! Hope this is helpful.

@bkholla4127 3 жыл бұрын

Where did u get these send me the link please

@SpeedCultureStudios 3 жыл бұрын

@@bkholla4127 information is in the video and in the description

@lexg3713 Жыл бұрын

Bad ass video couldn't be explained any better!

@SpeedCultureStudios Жыл бұрын

Thanks! Glad it was helpful

@JR_LIGHTS 3 жыл бұрын

Awesome video! Great tutorial!

@SpeedCultureStudios 3 жыл бұрын

Not a bad install. Well worth it! They looks awesome!

@jjorr1 5 ай бұрын

You just save me with idea i was rdy to remove the bumper thank you so much

@Finesse05 3 жыл бұрын

U are awesome brother. Appreciate the vid

@BRYAN-uh7ge Жыл бұрын

Looks awesome!!!

@tikochavsd Жыл бұрын

great video ,I saw other video, I install the mirror lights ,and look nice. my car have turn signal like that but only amber. !!!! now , order news, for install, from Maryland. thanks

@paulo.8085 3 жыл бұрын

I envy you. I had to take off my bumper to do Mines. Kudos boss!

@SpeedCultureStudios 3 жыл бұрын

I was determined to NOT take it off lol

@jonbank7569 3 жыл бұрын

Nice job 👍🏼

@tashaunsoto6940 3 жыл бұрын

"I swear to God this thing been down more often than 3.0t guys"🤣🤣🤣

@SpeedCultureStudios 3 жыл бұрын

🤣🤣

@Voltis-5 3 жыл бұрын

😂🤣😅🤣🥵💀☠️

@tashaunsoto6940 3 жыл бұрын

@@Voltis-5 that's true thou bro 🤷🏾‍♂️

@maxhagerman727 3 жыл бұрын

I had the problem with the windows squeaking just like you. It took me forever to figure out what it was but I fixed it by spraying silicone lubricant in the front and rear tracks for each window

@SpeedCultureStudios 3 жыл бұрын

It’s a common thing for the Infiniti when there is moisture. No noise when dry

@mikeschaner5853 3 жыл бұрын

"Effff that noise, we're not doin' that!" 😆 I messaged him about q70 stuff and never got a message back... I might have to start doin q70 stuff on my own... Great vid man.. Love YOUR 50.. They're basically a rental, but YOURS... Idk what it is but yours is different.. Maybe it's you.. Idk. Great content J...

@SpeedCultureStudios 3 жыл бұрын

Thanks! I don’t know about the rental comment lol but thanks haha

@mikeschaner5853 3 жыл бұрын

@@SpeedCultureStudios no offense 😆... Wasn't intended for that.. They just give me a mass produced feeling which is not typical of infiniti... Not sayin they're not nice cars.. But what i am saying is YOURS stands out from the crowd for me.. So serious kudos!!

@SpeedCultureStudios 3 жыл бұрын

@@mikeschaner5853 haha I knew what you meant

@JR_LIGHTS 3 жыл бұрын

Hey Mike. Check your pm on IG!

@2FittedBW 3 жыл бұрын

That shot at the 3.0T 😂

@SpeedCultureStudios 3 жыл бұрын

🤣

@aznleonheart214 2 жыл бұрын

Dude! That is pretty sick! I love it! Hey! Would you happen to have the links for both the front and side mirror sequential lights? It’s perfectly synced!

@SpeedCultureStudios 2 жыл бұрын

Mirror sequentials are linked in my install video for them. No link for these-they are from jr_lights mentioned in the description

@samh2335 3 жыл бұрын

Ordered my pair but due to weather it’s a week late so hopefully they show up !

@SpeedCultureStudios 3 жыл бұрын

Whether crazy right now!

@zemps6542 10 ай бұрын

Hey, great video just one question. When I installed the kit without the diode dynamics kit the fog light didn’t turn on. Any solution?

@ichiban369 7 ай бұрын

Hi, what wire would i tap into on the diode dynamic harness if i want DRL to stay on as well as the foglights?

@KJRace31 3 жыл бұрын

I just installed these on my 17 Q50 RS with adaptive headlights. You need a load resistor for the power to each light for the DRL (whites) in order to prevent hyper flash when using the turn signal while the whites are on. Just a FYI. Even if you tap the correct wire (which I did).

@SpeedCultureStudios 3 жыл бұрын

This was mentioned in the video

@DvrvinJr 3 жыл бұрын

Whats this exactly and where does it go

@SpeedCultureStudios 3 жыл бұрын

@@DvrvinJr it’s just a small resister that is wired between the light and the power source wire.

@DvrvinJr 3 жыл бұрын

@@SpeedCultureStudios i did mine today, and everything time im turning they flash fast and not like normal. So ima need to buy this where?

@SpeedCultureStudios 3 жыл бұрын

@@DvrvinJr check with jr_lights on IG. He could probably get you a couple of resistors for a good price. Let him know I sent you.

@Nikki-gg4sj 3 жыл бұрын

Looks great! Have you done the LED taillight turn signals? Also plz look into the mod to made the eye brow strip lights brighter and longer, like you see on the Mercedes Benz if you know thanks

@SpeedCultureStudios 3 жыл бұрын

You can have headlights modified. I have done the rear signals yes

@zeusyt122 6 ай бұрын

Could you explain how to tape in to drl/ use the power resistors?

@pik_si Жыл бұрын

Hi guys! I recently got as a gift sequential front bumper turn signals for infiniti Q50. After connecting them to the original plug, it turned out that only the first two LEDs are activated and the rest of the turn signals blink rapidly as if one of the turn signals is faulty. The electrician at the Infiniti dealership who installed it tried to add a resistor, however, this did not help. The car has been produced in 2018- My question is, did you have such a case? Can you maybe advise something on how to deal with this problem? I would really appreciate some advice 🙏

@airwreckbee313 3 жыл бұрын

Looks like the Q50 and Q70 don't share the same part number for the front bumper turn signal. Do you know of any Q70 options out there?

@Zmbide 3 жыл бұрын

Sheesh I'm not attempting myself lol. But jrlights I'm placing an order

@SpeedCultureStudios 3 жыл бұрын

You can do it!

@DV8N1 3 жыл бұрын

It's honestly not bad at all! I was nervous also but it wasn't bad at all.. Installed front grill, lip, and tinted my turn signals all in one go and called it good! I found it easier without jacking car up also...easier to rest bumper on blanket while I unplugged connectors.

@RajDaddyProductionz 3 жыл бұрын

Is there a wire you can tap into to have the DRL on day and night? OR would it just have to be tap into DRL headlight just for day...or tap into the headlight power just for the night? So basically one or the other

@SpeedCultureStudios 3 жыл бұрын

You can tap into any source you can find that has constant power

@rztricky 2 жыл бұрын

How do I get to the leftmost front sensor? Mine was pushed in and is tripping out the system.

@habibullahuddin4407 3 жыл бұрын

where do i tap into for it to stay on all times?

@Activeq631 Жыл бұрын

my sequentials came with a white wire do I need to use that?

@benjaminross7930 2 жыл бұрын

Man I have looked everywhere, but can you tell me if it is possible to install a pioneer double din receiver with my 2014 infinity q50? I have subs so I need a better player.

@jersonmancebo7453 Жыл бұрын

Do you have a video of smoke ones from jr light looking to get the smoked instead of the clear one but I’m afraid they would be less brighter

@SpeedCultureStudios Жыл бұрын

I don’t have a video, but brightness really is not impacted

@AnthonyyC23 2 жыл бұрын

Where did you get that metal engine shield from ? I have a plastic one that got damaged pretty bad from a bump in the road

@SpeedCultureStudios 2 жыл бұрын

Check out my KZfaq channel. Every part has been documented, installed and reviewed. Z1 motorsports has th aluminum undershroud

@luisg4082 3 жыл бұрын

Do you disconnect the battery anytime you work ok this? With these lights or the side mirror sequentials?

@SpeedCultureStudios 3 жыл бұрын

No, but I’d you feel better about it, you certainly can.

@shawnpope663 5 ай бұрын

Question I want to ask I have a q50s for two n half years now n when I b driving it. It like when I press on the break to stop the car n the car start to shakes can u tell me wt does that mean

@retro8175 3 ай бұрын

you need to replace your brake rotors and brake pads

@bn4241 2 жыл бұрын

If I were to put my car on a lift and remove the under tray. Do you think I still need to pull the front bumper off?

@SpeedCultureStudios 2 жыл бұрын

The passenger side light is blocked by the washer fluid tank. Can't get to it from under the car. That's why I did it the way I did in this video.

@ExtinctHermit 3 жыл бұрын

Hey great video as usual man :) would you know if these are compatible with G37s as well?

@ExtinctHermit 3 жыл бұрын

Man it's useless as fuck to comment on this guy's page lmao. Dude responds to every other comment, but completely ignores you when you talk about a G37. NEVERMIND.

@SpeedCultureStudios 3 жыл бұрын

Wow, that's an intense comment. The G37 has a totally different bumper and different lights. Of course they aren't compatible. Also, I am not a G37 expert and many times others will chime in to answer questions that know the answers better than I do. I don't ignore G37 questions lol.

@dancooper5984 Жыл бұрын

Jwv if you have any advice, I bought and installed my sequential turn signals last year and one of mine is now flickering when the car is on. I've went and checked all my connections even redone a few, still no luck. Any thoughts?

@SpeedCultureStudios Жыл бұрын

Might need one of those resistors

@michaelwaite2051 3 жыл бұрын

Can you add links to where i can get the carbon fiber lightup emblem and the front sequential signals?

@SpeedCultureStudios 3 жыл бұрын

No links. I stated in the video where you can get them-you have to order them directly on Instagram. @jaliscos_carbonfiber for the emblem and @jr_lights for sequentials

@jhengis1971 Жыл бұрын

Thank you for this! great install. What happened at 13:58? Heard something snapping.

@SpeedCultureStudios Жыл бұрын

I don’t think anything happened. I think it sounded worse than it was.

@M3NACE2CHICITY Жыл бұрын

Great video!! But I’m having one issue please help. I have a 2017 Q50 redsport. I followed everything you’ve done here. Everything is working as should. But my DRL are not turning on. I spliced to the exact connector and exact pink wire as you instructed. But nothing. If it helps I purchased the V2 style lights. Thanks in advance !

@ichiban369 7 ай бұрын

The pink wire you tapped into is the power for when your low beams are on.

@TheRELLEworld Жыл бұрын

Broooo I just got a 3.0t what should I look out for and will tuning void my warranty love your vids I saw you car under Amazon display for these signals

@SpeedCultureStudios Жыл бұрын

Warranty is a tough one-check out my video about how mods effect warranty. Watch for excessive smoke out the tail pipes and keep an eye on your coolant levels

@pumpcj9170 2 жыл бұрын

Where did u get the rgb emblem

@jezdfax 3 ай бұрын

I have a 2008 G37. Stock height. The left rear seems to be a little lower than the right rear. What should I do to even the height.

@SpeedCultureStudios 3 ай бұрын

If you’re not on Coilovers, you probably have to replace the suspension

@chrisbaysa3074 3 жыл бұрын

Do you have a video for the mirror Sequence lights?

@SpeedCultureStudios 3 жыл бұрын

Yes!!

@ryangrover8600 Жыл бұрын

do you need a always on module or can you tap into the headlights

@SpeedCultureStudios Жыл бұрын

You can tap the driving lights or head lights but it was just simpler for me since I had the module

@jplagintheQ 5 ай бұрын

can I just install them without the red wire ?

@dvanheld 3 жыл бұрын

You sound exaxtly like Mike Adams from Natural News!!

@SpeedCultureStudios 3 жыл бұрын

Interesting. I've never heard of him.

@Unsuccesses 3 жыл бұрын

So say I just want the sequential lights only. And don’t do any wiring. If I turn on all my lights or like fog lights during night time, will the lights not come on since I only connected the plug and play or will they come on without the DRL all the time

@SpeedCultureStudios 3 жыл бұрын

If the drl doesn’t have power, it can’t turn on

@Unsuccesses 3 жыл бұрын

@@SpeedCultureStudios do I need to disconnect the battery when unplugging cords a, like sensors or no? Like In general

@SpeedCultureStudios 3 жыл бұрын

@@Unsuccesses in general it’s a good idea to disconnect

@cbquads5109 10 ай бұрын

I tried installing these and that driver side didn’t work. When I connect direct 12v to the light it turns on but when it’s plugged into the harness it won’t work. Any ideas?

@SpeedCultureStudios 10 ай бұрын

Not getting a good connection is all I can think of.

@jjorr1 4 ай бұрын

Do i need to purchase the always on module for the sequential light to stay on running day lights

@SpeedCultureStudios 4 ай бұрын

No. It was just on the car already, so made it easy for installation in this case.

@jjorr1 4 ай бұрын

@SpeedCultureStudios so you tap into the emblem light is that where do u suggest tapping into to I had this day today my stay on lights aren't working cause they didn't wire them in right place only turn signal is working

@perfectnumber7783 3 жыл бұрын

hello. Great video. I have a question and I don't know if you can answer it. We had a front passenger side fender bender in my wife's 2017 Q50 I have ordered the bumper brackets front headlight (even tho that's working) for the fender. my question is there is a round piece that is behind the light a little lower and has been broken. you can see the motherboard. It's not the headlight, fog light, or turn signal they are all intact even tho the headlight is pushed down. the turn signal doesn't work but the headlight does and the fog light does. I can email you pictures if that would help you. I appreciate any help you can give me. My wife thinks we need to order that part and I have no idea what it is to order it. thank you in advance

@SpeedCultureStudios 3 жыл бұрын

I cannot tell you exactly what it is--may be part of the impact sensors. You can also find exploded view diagrams of the car's parts and components. You'd be able to find that part on one of those diagrams. I am also sure an infiniti service/parts department would be able to tell you exactly what it is, the part number, and the price.

@TheSoccerkid00 3 жыл бұрын

I had these not too hate or anything my respect to Jr lights but I took them off they aren't bright when your making a turn signal so I decided to stay with my stock turn signals on the other hand the drls look amazing

@SpeedCultureStudios 3 жыл бұрын

The signals aren’t bright? I mean I don’t really need them bright. My mirrors signal too so I have plenty of signals lol

@JR_LIGHTS 3 жыл бұрын

Who’d you purchase them from? That’s strange. Mine are super bright.

@SpeedCultureStudios 3 жыл бұрын

@@JR_LIGHTS definitely are! Pretty evident in the video that brightness is not an issue!!

@TheSoccerkid00 3 жыл бұрын

@@SpeedCultureStudios like im saying when your making a turn signal they sequential right well they're not as bright as the oem turn signals if that makes sense? I love the drls but I just proffered the stock look 🤷‍♂️

@TheSoccerkid00 3 жыл бұрын

@@JR_LIGHTS I got them from taimoor like I said no hate its a very good product it would be nice to have the stock turn signals have drls

@Og.r23 3 жыл бұрын

Where did u get the mirror lights from jr light as well ?

@SpeedCultureStudios 2 жыл бұрын

Amazon.

@joeriver8891 2 жыл бұрын

could you put a link where i can purchase this ones thanks really apreciated.

@SpeedCultureStudios 2 жыл бұрын

Contact information is in the description

@kevinweatherly7000 Жыл бұрын

I think you should get your own shop boss you will make good cash

@SpeedCultureStudios Жыл бұрын

I’d love to!

@kevinweatherly7000 Жыл бұрын

Go for it boss I learned a lot from you just want to tell you thanks save me couple bucks

@SpeedCultureStudios Жыл бұрын

@@kevinweatherly7000 I really appreciate the kind words and support!

@rolandoalvarado2398 Жыл бұрын

Hello. Do these stay on all day and night ? If so, what did you connect it to? I’m having trouble connecting mine to stay on all the time but it won’t work.

@SpeedCultureStudios Жыл бұрын

Yes they do. If you go to the 4:02 mark in the video, I explain that I have the "Always On" module installed. That keeps your fog lights on. Rather than tapping into the factory harness, I just tapped the always on module. Otherwise you could tap into the DRL or headlights, but keep in mind that they would only be on when the DRL is on or the Headlights are on. IF you want them on all the time, you'll want the always on module. Check out my video for that!

@rolandoalvarado2398 Жыл бұрын

@@SpeedCultureStudios thank you so much for the fast response my man! Just one last question. So my car came with the remote start. I also have the mirror sequential and they turn on when I remote start the car but not the front sequential. Will connect to the all day module help with that? I mainly bought these lights for that purpose. To turn on with the remote start

@SpeedCultureStudios Жыл бұрын

@@rolandoalvarado2398 Always on module wont help with that I don't think.

@Colyon 3 жыл бұрын

Whats wrong with the 3.0t? I'm going to buy one soon.. is it the turbos?

@SpeedCultureStudios 3 жыл бұрын

Nothing is “wrong” with it. With proper maintenance, it’s a great car

@izzyram31490 3 жыл бұрын

Where can I order the sequential lights for mirrors and front bumper sequential??

@SpeedCultureStudios 3 жыл бұрын

@jr_lights on Instagram

@Headnsouth 2 жыл бұрын

@@SpeedCultureStudios I don't do IG. Is there any other way to contact JR?

@Headnsouth 2 жыл бұрын

No reply from JR yet. What brand does he sell?

@deeemmanuel9831 2 жыл бұрын

Where can I order those sequential lights and the adapter to fix the issue

@SpeedCultureStudios 2 жыл бұрын

All information is in the description

@infinitiqs548 3 жыл бұрын

dammmn why you gotta hate on us 3.0T boys 😂😂

@ramoysaddoo6375 3 жыл бұрын

Hey I just got a q50 and my passenger light don’t work the same component you replace can I replace the bulb if that’s a option or do I have to replace the whole component like what you did ? And do you have a link to where I can get one if so please can I get it thanks for the video.

@SpeedCultureStudios 3 жыл бұрын

What light doesn't work?

@ramoysaddoo6375 3 жыл бұрын

@@SpeedCultureStudios the same part that you replace in the video I was asking if I have replaced the light or the whole part and replace it like what you did in the video ?

@SpeedCultureStudios 3 жыл бұрын

@@ramoysaddoo6375 yes the sequential lights are a completely new light

@ramoysaddoo6375 3 жыл бұрын

@@SpeedCultureStudios do you have a link ? To where I can buy it from ?

@SpeedCultureStudios 3 жыл бұрын

@@ramoysaddoo6375 purchasing details are in the video and in the video description. No link. IG seller

@nedunonnyp704 2 жыл бұрын

Hey do you know where I can get pics or List of Items that Goes behind the Front Bumper? I'm rebuilding My Q50 and Totally lost as to where what went and how. Or make a quick vid.

@SpeedCultureStudios 2 жыл бұрын

I can’t make a quick vid lol-they take a long time to make. You can find diagrams online of the car that shows each part and where it’s located.

@nedunonnyp704 2 жыл бұрын

@@SpeedCultureStudios I've been looking Man. Can't find anything Online

@SpeedCultureStudios 2 жыл бұрын

@@nedunonnyp704 it’s there man. I’m not sure exactly what you’re looking for but a quick Google search and I found a ton of diagrams

@nedunonnyp704 2 жыл бұрын

@@SpeedCultureStudios Okay, maybe its Me.. But, What Search Query did you do and found all the Diagram?

@Headnsouth Жыл бұрын

Did you guys get the gold resistors with your light kit from JR?

@rifraf6110 Жыл бұрын

Yeah I did

@Headnsouth Жыл бұрын

@@rifraf6110 that's weird bc my first 2 sets did not and took a dirt nap after a few weeks. I'm onmy third set and now they have come with the resistors. Idk?

@Raidel36 2 жыл бұрын

Where would I need to tap into if I wanted them on all the time on the factory wiring

@SpeedCultureStudios 2 жыл бұрын

Into the wire for the DRL--same wire the always on module runs off of

@Raidel36 2 жыл бұрын

Which wire would I need to tap into in the diode dynamic always on module, because I want them on all the time like the fog lights are on all the time with the diode dynamic module

@acm_1028 3 жыл бұрын

Where did you get your undershroud? I can't find them anywhere

@SpeedCultureStudios 3 жыл бұрын

@acm_1028 3 жыл бұрын

@@SpeedCultureStudios Thanks, I will be buying one when they come back in stock

@omaralsarama 3 жыл бұрын

Where can I order those lights i am having trouble finding them online

@SpeedCultureStudios 3 жыл бұрын

Information in the description of the bideo

@jersonmancebo7453 Жыл бұрын

Did you tap it with the fog lights cable or the headlight?

@SpeedCultureStudios Жыл бұрын

8:50

@jersonmancebo7453 Жыл бұрын

I’m buying the emblem and turn signals from the same person you got it. How are yours holding up so far. And one more question how many a.w.g do I need to buy the splice connectors cuz I see some blue ones and some reds they have different a.w.g

@SpeedCultureStudios Жыл бұрын

@@jersonmancebo7453 no issues with them.

@nathanwanger8957 3 жыл бұрын

If your car has DAS like mine does, when you remove the fender liners, you cant get to the back of the fog lights or turn signals, because the DAS computers are mounted in the way. and they are a bitch to take off. Just FYI

@SpeedCultureStudios 3 жыл бұрын

That's a good point. I assumed there would be some components tucked in there with DAS, but would have thought there would be clearance with all the room under there. Thanks for mentioning that!

@jersonmancebo7453 Жыл бұрын

It it normal that when I lock my door only half sequential goes through only when I lock the doors ?

@SpeedCultureStudios Жыл бұрын

I'd have to look, but I think yes actually. Then it does the full length when unlocking.

@jersonmancebo7453 Жыл бұрын

@@SpeedCultureStudios yup then Im good if that’s the case bc it does the full one when i unlock it but when I lock it only does half

@pablohernandes5874 3 жыл бұрын

Do you really have to use the resister

@SpeedCultureStudios 3 жыл бұрын

No. You will just get hyper flash if you are rolling down your windows with the blinker on lol

@joselopez1456 3 жыл бұрын

Where did u buy the lights at

@SpeedCultureStudios 3 жыл бұрын

I said it in the video several times as well as in the description

@EvoDad87 2 жыл бұрын

Where did you get the front emblem?? I can’t find it online

@SpeedCultureStudios 2 жыл бұрын

Check out my other videos! You'll see the emblem installation and details where to find it. Every part I have ever installed is documented and reviewed on the channel.

@EvoDad87 2 жыл бұрын

@@SpeedCultureStudios alright thanks I’ll keep looking for it

@SpeedCultureStudios 2 жыл бұрын

@@EvoDad87 just search speed culture led emblem

@illport4002 2 жыл бұрын

These fit the q70??

@SpeedCultureStudios 2 жыл бұрын

Possibly but I can’t confirm, unfortunately

@bkholla4127 3 жыл бұрын

Can you a link to where u brought these it will a great deal

@SpeedCultureStudios 3 жыл бұрын

No link. Details in the description.

@bkholla4127 3 жыл бұрын

@@SpeedCultureStudios ok thank you so much I appreciate and I love the videos real help

@Finnegan6674 3 жыл бұрын

Lovbe those lights. How would I go about getting them? I do not have instagram. Is there a web site?

@theutopiansociety 3 жыл бұрын

The sellers are on Facebook too

@SpeedCultureStudios 3 жыл бұрын

Email him jackrader@ymail.com

@Headnsouth 2 жыл бұрын

@@SpeedCultureStudios Thank you nevermind my question. Great video!

@lopez_flex1258 Жыл бұрын

wasn’t so easy on the driver side 😅😅 i bumped into the same problem

@kennyrichard1167 3 жыл бұрын

easy unless you have the front radar/sensors. Then you have NO access just FYI. Have to take bumper off.

@DV8N1 3 жыл бұрын

Good to know!! Thank you.

@deehuncho1835 5 ай бұрын

My signals works perfect but my drl not coming in

@aaronpunko7778 Жыл бұрын

What was the instagram account that u got that carbon fiber light up emblem from?

@SpeedCultureStudios Жыл бұрын

Jaliscos carbon fiber. It’s in the description of the emblem video

@romansyman2806 3 жыл бұрын

Where I can order em. ? Thx

@SpeedCultureStudios 3 жыл бұрын

I believe I mentioned it a few times in the video and in the description

@zichenwang25 2 жыл бұрын

Where I can buy this one?

@SpeedCultureStudios 2 жыл бұрын

Contact information for JR_Lights is in the description.

@KingTwinTurbo 3 жыл бұрын

Link to product in description please bro

@SpeedCultureStudios 3 жыл бұрын

No links. I provided the tags to the sellers. On IG only

@timothycummings447 2 жыл бұрын

Where can I find These

@SpeedCultureStudios 2 жыл бұрын

Check the description

@mattg3829 3 жыл бұрын

Oh hell no!! Down more than a 3.0t!!! Take it back J!!

@SpeedCultureStudios 3 жыл бұрын

Haha I had to

@PNitta Жыл бұрын

Anybody else have these lights take a dirt nap after the install? I'm on my second set.

@johnmertins6430 3 жыл бұрын

Where can I buy the sequential front turn signal lights?

@SpeedCultureStudios 3 жыл бұрын

It’s stated in the video and in the description

@johnmertins6430 3 жыл бұрын

How do I order these from JR Lights?

@SpeedCultureStudios 3 жыл бұрын

@@johnmertins6430 on IG or jackrader@ymail.com Yes...y mail

@johnmertins6430 3 жыл бұрын

GREAT video on installing the sequential turn signals. Didn't have to pull the bumper. I also install the sequential mirrors. I have 1 issue with the turn signal to where it flashes fast? the left is fine and that's the one I tapped in with the suppressor. Do I need to install it for the right one as well? I have it wired just as you have. Appreciate the help....

@SpeedCultureStudios 3 жыл бұрын

@@johnmertins6430 yes you need to install the little resistor on both sides to prevent hyper flash

@klb1718 2 жыл бұрын

Where can I purchase it?

@SpeedCultureStudios 2 жыл бұрын

Check description

@jameswan670 8 ай бұрын

Still working well?

@SpeedCultureStudios 8 ай бұрын

Never had an issue

@raulnevarez2725 Жыл бұрын

Are these bright enough???

@SpeedCultureStudios Жыл бұрын

Bright enough for what? They are brighter than your factory fog lights

@raulnevarez2725 Жыл бұрын

I meant the turn signal. I saw someone comment somewhere else that the signal was dim.

@SpeedCultureStudios Жыл бұрын

@@raulnevarez2725 no, they are quite bright. I showed it at 16:30 in the garage with lights on and it still looks bright.

@jonathanrodriguez1892 2 жыл бұрын

Can you post the link

@SpeedCultureStudios 2 жыл бұрын

There is no link. They are sold by JR Lights. Details in the description.

@4uenvycustomsleds321 3 жыл бұрын

You don't have to take the front bumper off I got mine on without taking it off.

@SpeedCultureStudios 3 жыл бұрын

I didn’t take it off either. Just loosened the one side to get clearance.

@4uenvycustomsleds321 3 жыл бұрын

@@SpeedCultureStudios I didn't see that I was skip looking. but yeah I have some scratches on my arm from the driver side of the car but it worked out. I just have the sequential ones now 😬 oh well I guess I'll put out some more money and give these lights away for little to nothing.

@SpeedCultureStudios 3 жыл бұрын

@@4uenvycustomsleds321 haha well the sequentials is what I wanted. The driving lights are cool though!