DING!! Yer Hot Pocket is done. Great fix with the toaster oven.. Great video as always.
@ratsrodsgarage4612 жыл бұрын
Man Price went up you lucky dog lol Just got my kit for 417.99. Nice video.
@QuickSpeedShop2 жыл бұрын
Thanks.
@sheldonraph55243 жыл бұрын
Thanks for a great video! I'm installing the same kit and the Speedway instructions are not very clear.
@BBBILLY863 жыл бұрын
Looks like a great kit but..... ouch! $453.53 for the kit as of July 1st 2021.
@AtomicReverend2 жыл бұрын
484.99 as of 11/24/21
@les53864 жыл бұрын
That truck is going to be sweet Josh.
@QuickSpeedShop4 жыл бұрын
Thanks!
@600miles3 жыл бұрын
You can use your toaster oven for powder coating too. I got the biggest toaster oven I could find, after a while you can't see through the window anymore!
@rwesterlage63153 жыл бұрын
Thank you very much. So easy a caveman (me) can do it! Will be doing this on my 1941 ford super deluxe with new bendix brakes on the rear.
@matthewhuffman16233 жыл бұрын
Anybody else catch the Michael Scott reference in there? Thanks for sharing, I’ll be doing this to my 29’ soon. I’m tired of people not realizing how they can’t slam on brakes in front of a 100 yr old car.
@davevan8864 Жыл бұрын
Thanks!
@oldsilkhat78934 жыл бұрын
Great video!
@QuickSpeedShop4 жыл бұрын
Thanks!
@oldsilkhat78932 ай бұрын
Is there a reason you can't use this kit on a 30 axle? I see all the kits are for 36-48 spindles.
@QuickSpeedShop2 ай бұрын
The axle isn't the problem, it's the spindles. All my axles are Model A axles. You need '37 and up spindles
@Raydawg4 жыл бұрын
Awesome!!
@arishoath8725 Жыл бұрын
Quick question. I have this exact kit I'm about to put on my '36 ford (with '37 spindles I just put on). Why are the rotors scraping the pads when you spin them around at the end? Is that normal after an install and they will open back up off the rotor once you hook it to the hydraulic lines and bleed?
@QuickSpeedShop Жыл бұрын
Pads always drag on the rotors a little. If there was a gap, every time you hit the brakes the pedal would go to the floor until the pads made contact.
@arishoath8725 Жыл бұрын
Got it. Thank you!
@peternuttall1952 Жыл бұрын
With the ease the rotor dropped onto the spindle are you not concerned that the rear bearing inner race is spinning on the adapter rendering the benefit of bearing useless?
@QuickSpeedShop Жыл бұрын
It fit good and has been fine for several thousand miles.
@peternuttall1952 Жыл бұрын
@@QuickSpeedShop I guess the load on the spindle from the front (castled) nut locks it together.
@jeremybentley60074 жыл бұрын
Do you have the part numbers for those rotors and calipers? Much thanks and great content!
@QuickSpeedShop3 жыл бұрын
It's the Speedway 11 inch rotor kit for early Ford axles. Easy to find on the website.
@1vernl12 жыл бұрын
I have a set of 15 '' ford steel rims , they are older but I don't know how old , do you think they will fit on this conversion ? great vid. keep up the good work
@QuickSpeedShop2 жыл бұрын
They will fit as long as they are 5 on 4 1/2" bolt pattern AND they don't have the super small center hole that some Ford wheels had. For example, early '50s Ford car wheels have the right bolt pattern, but the hub hole is too small to fit the late-model rotor.
@randyhuck6693 Жыл бұрын
have you ever installed 14” wheels with this kit ?
@QuickSpeedShop Жыл бұрын
No, I haven't. I'd email Speedway and ask them.
@randyhuck6693 Жыл бұрын
@@QuickSpeedShop say min 15”. some say they have used
@QuickSpeedShop Жыл бұрын
I never tried 14" so I don't know.
@donharris72742 жыл бұрын
What spindles are you using with the steering arms. All the kits I see the spindles has no arms. Thanks.
@QuickSpeedShop2 жыл бұрын
Stock '37-'41 Ford spindles.
@AtomicReverend2 жыл бұрын
If your spindles are missing the steering arms You will need www.speedwaymotors dot com/1937-48-Ford-Steering-Arms-3-3-4-Inch-Drop,25541.html Sorry I had to corrupt the link or KZfaq would have thought it was spam just remove the "dot" for a "." If that makes sense
@aussiejas65994 жыл бұрын
I am going to tell the toaster oven POLICE! so look out...buddy
@rocksaltmetalworks63503 жыл бұрын
Per chance are you running discs in the rear?
@QuickSpeedShop3 жыл бұрын
No, just 8" Ford with 10x2" drums.
@fuddwacker48032 жыл бұрын
Is the rotor adapter in the kit?
@QuickSpeedShop2 жыл бұрын
What do you mean by rotor adapter? These rotors bolt directly onto '37-'48 Ford spindles.
@fuddwacker48032 жыл бұрын
Is the rotor adapter in this kit?
@QuickSpeedShop2 жыл бұрын
I don't know what you mean by adapter. These rotors bolt right onto '37-'48 Ford spindles.
@fuddwacker48032 жыл бұрын
@@QuickSpeedShop maybe I should have called it a stainless sleeve. It’s the very first item you slide onto the spindle shaft.
@QuickSpeedShop2 жыл бұрын
The kit comes with everything to just bolt them on old Ford spindles '37-'48. You can look it up at speedwaymotors.com
@phdexteriorcleaningphd97743 жыл бұрын
I did not get any instructions and when I called speedway I was told to follow the instructions. They were no help.
@alanhovious3160 Жыл бұрын
Are you reading new messages?
@QuickSpeedShop Жыл бұрын
Comments? Yes, if I see them.
@600miles2 жыл бұрын
That's what she said jokes are marginal 6:45 is a better ref w/o being dirty :-p My Speedway bearings are stamped CHINA, if you dislike China bearings order some better ones