Рет қаралды 2,330
Braden is here to get you set up with our top of the line powered windshield. You can close, open, or set it to any position in between without slowing down. All it takes is the push of a button. It’s easy, it’s practical, and you’ll be comfortable no matter what. Easy to wire and easy to operate, the video will give you a step by step guide for installation.
00:25 - Tool list
00:29 - Remove the hood from the machine
00:38 - Remove the dash from the machine
01:23 - Run the wires through the machine
03:57 - Connect the wires to the machine
06:58 - Reinstall the hood and dash to the machine
08:00 - Confirm windshield fitment and remove the protective film
08:22 - Install the bulb seal to the windshield
11:24 - Attach windshield clamps to the machine
14:02 - Install the d-seal the machine
14:37 - Install the windshield brackets to the clamps
17:21 - Install the actuator to the brackets
18:22 - Install the windshield to the machine
Ready to get your Power Flip Windshield? Visit superatv.com...
www.superatv.com/polaris-rzr-...