How to install the Gravity Adjustment Plate on Zhiyun Crane 2

No video

How to install the Gravity Adjustment Plate on Zhiyun Crane 2 - Canon 1DX Mark 2

Рет қаралды 1,659

Күн бұрын

Video will show you how to install the extra long gravity adjustment plate on your Zhiyun Crane 2 gimbal stabilizer in order to accommodate an over sized camera such as the Canon 1Dx Mark 2.
here is the link to the “Zhiyun Crane 2 Handheld Gimbal Spare Parts Gravity Adjustment Plate for 1DX” www.geekbuying...
Attention KZfaq:
I am licensed by Apple, Inc. to use “Jaracan da” which is provided in the Final Cut Pro X App from Apple, Inc.

Пікірлер: 18

@carlosg9207 5 жыл бұрын

would this work for the Zhiyun Crane 3?

@TillThenPlease 5 жыл бұрын

Thanks for the video Caesar. Do you know if the Zhiyun Crane-2 will take a canon c200? It's not an slr but does see to fit within the weight limits.

@caesaryanez 5 жыл бұрын

I am not sure

@A.Lewisfilms 6 жыл бұрын

Great video! Thank you for sharing. Unfortunately, I already used the allen wrench that was included and stripped 2 of the nuts...any suggestions on how to get those out now? Got a shoot this weekend so in bit of a hurry, thanks Caesar!!

@caesaryanez 6 жыл бұрын

Yes the supplied Allen wrench is of poor quality. You have several options to remove the screws. 1. use a rubber band or crazy glue, this video will demonstrate - kzfaq.info/get/bejne/iauKrLir2Z7cqac.html 2. The screws on the Zhiyun are small; therefore, you will need a small "Extractor" here is one sold via Amazon - www.amazon.com/dp/B07BCZW198/ref=sspa_dk_detail_5?psc=1&pd_rd_i=B07BCZW198&pd_rd_wg=GjIGa&pd_rd_r=QJHDNEFYSTFMY40KXQBX&pd_rd_w=dpfjy or use the following keywords to locate them "Damaged Screws Extractor and Remover Kit" good luck

@askmrtowers 6 жыл бұрын

PLEASE HELP WHAT METHOD DID YOU END UP GOING FOR MINE STRIPPED:( AND WHERE CAN I BUY NEW ONES? PLEASE REPLY BACK!:(

@threethroneproductions5498 6 жыл бұрын

Hi Alex, how did you fix the stripped nuts? i just stripped one of the nuts.

@askmrtowers 6 жыл бұрын

I FINALLY FIXED MINE AND I CALLED CONTACTED ZHIYUN TELLING THEM IF THEY CAN SEND ME SOMEMORE NUTS AND THEY DID....I TOOK MINE OFF WITH SCREW REMOVER IT WAS REALLY EASY!!!

@threethroneproductions5498 6 жыл бұрын

AskMrTowers thanks 🙏🏾

@Kisiellox 6 жыл бұрын

Would this plate fit in the Crane v1?

@ronspi 6 жыл бұрын

I don't know why you kept saying that it will fit the Canon. I was under the impression that the plate was made so taller cameras will fit, regardless of what type. Did I misunderstand?

@caesaryanez 6 жыл бұрын

You are correct it should fit taller cameras. If you notice, the title of this video has the keywords "canon 1dx mark 2" the video was intended for those that purchased this particular camera and had issues using the crane 2.

@ronspi 6 жыл бұрын

I understand. But you made it sound like the video is ONLY for those with that camera, and it is incorrect.

@caesaryanez 6 жыл бұрын

Sorry that was not my intent. Nevertheless thank you for addressing the issue.