All he did was show how stick led on the wall. Thanks man😂
@quintanilla413 Жыл бұрын
And the wiring magically appears on the back of the cabinets?
@IAmPhasion9 ай бұрын
lol right
@customsolutions71678 ай бұрын
Yes..😊
@georgewade17137 ай бұрын
And it will fall off in a little bit Especially by the stove
@wyatt_73956 ай бұрын
@@georgewade1713I did mine and above my stove too, been over a year not a single section has let go yet
@georgewade17136 ай бұрын
@@wyatt_7395 must have better glue these days, there's a lot of comments saying the same thing. Definitely is a problem if not done correctly. Good job
@icevariable96007 ай бұрын
He skipped a lot. You need to make sure the wattage for the controller & LEDs match. And you feed wires from a nearby outlet into your controller. I did this recently and added an occ sensor (motion detection switch). Be sure to get some plastic track with covers, or diffusers, so the lights won’t be so sharp. And you’ll need right angle track covers (I forgot what they’re called) so you can go around corners. You’ll also need some ribbon wire so you can connect between cabinets. Watch other videos on YT before attempting this.
@chilIychilI Жыл бұрын
Looks awesome bro. Nice job. The difference between quality tape light LED's installed by someone with a plan and Amazon's cheapest option is very apparent. I typically want dimmable/motion sensor/night light photo cell options but theirs so many options these days and the prices are reasonable.
@derperderp9036 Жыл бұрын
Great video but I have a question. How do you connect all the lights if the cabinets are in separate parts of the kitchen? Would I just fish it behind the drywall?
@keithsimon41447 ай бұрын
Thru the wall
@dylansultzer3643 Жыл бұрын
Nicely done. Looks clean. Just needs some track for the tape
@electricianjoe Жыл бұрын
We have that too!
@Live1509 Жыл бұрын
You have to consider that many led strips require an aluminum profile to dissipate the heat or the smds will die prematurely 😅
@jonrezboy50815 күн бұрын
Kool. How much linear feet per driver? And where do you switch on and off?
@xXBuckOFiveXx Жыл бұрын
Hot glue🤨 you think I work at hobby lobby or something?
@xzilicpython2338 ай бұрын
Need a longer video please. I want to know how to connect ot to my existing over head light switch. Also is it possible to add it to the interior cabinet, like a lower corner cabinet or lazy Susan. I'd like the light to come on when the door opens but turn off when the door is closed.
@keithsimon41447 ай бұрын
Anything's possible with a good electrician. We're like gods.
@JungleLarry3 ай бұрын
Mounting lights toward the front of your cabinets means you cast crazy shadows on anything you're trying do on your counters.
@chuckybob198411 ай бұрын
You end up with a shadow on the countertop right against the front lip - You can still get "wall wash" if you place it about 3" from the front lip, but with no distracting shadow
@seanjay8020 Жыл бұрын
Nice work, I do it the exact same way but I often use Switch X drivers and diode tape light.
@electricianjoe Жыл бұрын
Those switches are nice. Downside is they leave you no option for smart lighting…
@ronh938411 ай бұрын
Do you have a link for your preferred light tape and driver?
@alvarorueda648017 күн бұрын
Also you need to install this in a aluminum Chanel as this create heat
@shalon4jc22 ай бұрын
Where do you put the driver you used
@DExonn-diana Жыл бұрын
🎉🎉🎉Excellent work!
@viejabertha Жыл бұрын
What about for the rest of the cabinets how you will add them and where to connect the rest of the light. I just saw only one pice please answer me. Thanks
@customsolutions71678 ай бұрын
Yeah best part is when the tape fails. 😂😂😂
@georgewade17137 ай бұрын
Yes it will
@RuiSilvaPT6 күн бұрын
Was going to write exactly that, what a poor installation this was for a new kitchen... Jeezz
@jacobplank Жыл бұрын
Not sure what brand of tape lighting I use but I get the driver and dimmer switch all in one, it fits in a single gang box, just much simpler. This does look great!! I've never tried putting it on facing to the back though.
@BaileyFarming Жыл бұрын
I found that a few months ago at our local electrical supply store. Makes it so much easier.
@jacobplank Жыл бұрын
@@BaileyFarming yes it's much easier. Used a few over the last year, I bit pricey, around $100 if I remember correctly.
@genebeckley5189 Жыл бұрын
Instead of using hot glue, use a small plastic trac to hide those low volt wires looks cleaner and looks more professional install take the extra step
@dirtychubbs Жыл бұрын
Whats the switch brand/called? Haven’t seen this before
@blockyquasar9 ай бұрын
I have a problem. I don't have free outlets anywhere near and I don't want it to be messy by using the far ones. So do these backlights need outlets or can it be done without them?
@joelmiller30958 ай бұрын
No plastic wiremold to make that wire “disappear”?
@Electronzap7 ай бұрын
Nice.
@VortexTheGreat697 ай бұрын
We use the plug and play stuff and low volt staples I like the hot glue idea
@smp142011 ай бұрын
What color are those cabinets
@a1sawse93911 ай бұрын
Wanted to see the light in the dark
@lildeena18 ай бұрын
What do you do if you don’t have a recessed bottom panel? How can you make it not be seen easily?
@doberman1868 ай бұрын
Add 1” molding
@WaldemarMarty10 ай бұрын
Plz make a video on how to wire it tnx
@71stang7 ай бұрын
Your outlet layout looks jacked up brother. Someone didn't look at the cabinet layout close enough did they. Lol.
@Ty-vn3cu7 ай бұрын
What? The outlets look fine.
@71stang7 ай бұрын
@@Ty-vn3culook again, the sink is going to go below the window, there needs to be one to the left within 2 ft above where the dishwasher is going to go. That one above the dishwasher on the left side is more than 2 ft away from where the sinks Edge is going to be
@rogerdaniels94814 ай бұрын
Handyman special. Lmao😅
@aznative_8 ай бұрын
The tapes meant for temporary installation never for permanent installs.
@jbehr1226 Жыл бұрын
What temperature of light is this???
@electricianjoe Жыл бұрын
3000k
@dmh83295 ай бұрын
Are they dimmable?
@electricianjoe5 ай бұрын
Yep!
@keithsimon41447 ай бұрын
Remember kids granite reflects better get it straight.
@paulb11982 ай бұрын
Wow. No electrical needed!
@oscarjr26799 ай бұрын
Handyman special. Please don’t listen to this dude. If using tape lights, use a channel, or use actual u/c lights
@guyberghoff50278 ай бұрын
My thoughts exactly, and I would never mount them aiming at the wall either (it’s supposed to be task lighting, not a wall washer). They should be aiming down, and a short distance from the front of the cabinet, so as not to cast a shadow on the edge of the countertop.
@lfsiuvagacwoi3 ай бұрын
Bro skipped that hard part
@benjaminpopp57618 ай бұрын
Use a channel. That’s hack
@Jackspade2165 ай бұрын
You got it bro. He's not electrician. He's a GC.extra Cost