Dude you’re an absolute life saver been just finessing these on with the socket and it’s taken me HOURS to do 13 of the 16 valves on this Toyota sequoia head. With this trick the last three took about 3 minutes🙏

This technique worked like a charm on my 97 Camry, big thanks 🙏🏼🙏🏼

I tried this on a basic Toyota 2e 1.3 12v engine to replace valve stem seals while the head is on the engine and in the car..this combined with the 'Rope' Top dead centre method..(there many threads on it)..I changed valve stem seals with the head on my engine in my car in an hour or two..no more exhaust smoke from leaky seals and improved my timing aswell.Thanks for the awesome tip and trick. Just a note: for this to work you need to put a fair amount of elbow grease in it

I can't believe this worked. I am both angry and thrilled. Thanks for the tip.

Coolest thing ever, I did my first four valves in 5 minutes. Thanks

I have been struggling (and cursing) trying to replace the valve seals on my NA MR2. Spent most of the day just on the exhaust valves on cyl. #1 (the easiest). Ready to give up. Tried your method, and I installed both exhaust keepers on cyl. #3 in 15 minutes. Nothing more satisfying than hearing the click of those keepers falling into place. THANK YOU for the tip.

OH MY GOOD GOD! For and hour and a half I struggled trying to make the special tool work, saw this video gave it a try and the first valve is perfect! First try! Very helpful thank you!

I’m four valves in so far and tomorrow I’m going to use this method, thanks gonna save me at least an hour worth.

Thanks, this really worked! I tried a number of materials, that double plastic was the winner

Someone give this man a medal. After an 1.5 hours of struggling and almost buying a $50 tool, i got all them in quickly after watching your video. Keep going broski!

Your Subscriber number 562 here we go.

Tried with plastic bags, but found it difficult, so used thick kitchen rubber glove... perfect, still got idea from Your video... Thanks 🙂

Best tip ever!!!! Got all my stem seals done on my 7afe in about an hour. Thanks alot!!!

Oh wow the plastic bag trick works fantastic, thanks! I used this on my Mitsubishi 4A30T for my Minica Toppo.

You just earned a subscriber within the first 30 seconds of this video. Saved me from a massive headache. I love the ingenuity and a solution at no extra cost is a plus. Can't wait to finish my project on my mazdaspeed

If you are not joking,this is one of the neatest tricks i've seen in a long time! have to try that.

That's a pretty cool trick. I like it!

Bro All I gotta say is thank you…like for real for real..love you man and take care..was bout to buy and wait a week until I saw this thank you worked for me on my 1uzfe. Worked like a charm thank you❤❤❤

Thanks! Worked a treat.

Awesome video dude keep at it.

Nice job man im definitely doing this myself once i finish up the head resurfacing

Bro thank you so much for this trick i didn't know what i was gonna do in the morning, because i don't have that special tool or money to rent it or buy it man thanks again. Im wondering what the you put in yhe bottom of the head to hold the valve tight to the cyl head if you can let me know, but thanks buddy

Thank you so much for this tip!

I'm using a cut up sponge inside a socket which works well also but I wanna try this method. I'll recommend if I feel different about this method

Dude!!! Lots of good tricks and how to!!! keep it up !!! I’m also staring to gathering parts for my AW11 7AGE-16V + manual swap build.

great idea for weeker springs

You are a legend.

Thank you!

Thank you so much

Thank you for the insite

A piece of sponge crammed into a socket is far more robust than a plastic sealey bag.

Going to use this on my miata. You just saved my back.

Thanx bro its helped me

All these tricks are great, but seem to work when gravity is working for you in the vertical. I'm pressing these onto a horizontal Kawasaki single cylinder mower engine.

Cool! Thank you!

Thx bra

@EngineeretoDrive Hi ! how are you ? what's up with the 7age build ?

Only works if you have soft springs...its hell dealing with hard springs

But i can buy 2 or 3 bags i need to buy the whole box of 24 🤣