Sound deadening Project SPL with vibraflex and decided to make a lil how to video of it. Hope you enjoy. Don't forget to like & subscribe. #sundownaudio #techtimethursday #projectspl #sundownaudiounofficial
Пікірлер: 78
@vincebowling17785 жыл бұрын
Thanks for putting out these Tech Time videos....very good tips and advice
@UnofficialAudio5 жыл бұрын
Vibraflex isn't for everyone but if you need panel strength to increase SPL then this is the stuff you want to use. There isn't a stronger sound deadener available. It's tough to use but very worth the extra effort.
@hinesvillebass67425 жыл бұрын
what about the deaf-bonce double ridged?
@hemichris26805 жыл бұрын
Where can I buy vibraflex?
@hinesvillebass67425 жыл бұрын
@@hemichris2680 you can get it from aampere audio , defbonce , and some other specialty audio companys. My personal favorite is deafbonce. Keeps the car ridged had to use a blow torch to put it on as well.
@hemichris26805 жыл бұрын
Thanks for info. 👍
@hinesvillebass67425 жыл бұрын
@@hemichris2680 any time
@xs-j84735 жыл бұрын
Good video as always Derrick. This is a really useful piece of information for people who have never worked with vibraflex.
@psementalist5 жыл бұрын
Totally awesomeness brother
@akirk20895 жыл бұрын
Yea I agree it takes alot of heat for anything that has any thickness to it. Not a huge fan of torches. Lol I own a heat gun though so now I know what not to go with. Thanks my guy. Cant wait to see this build come together.. bass out
@josephdrago555 жыл бұрын
Taking so long to upload the nsv4 subwoofer test Wednesday, I had to buy one & test it myself.. I didn't know soundman was building the box!
@UnofficialAudio5 жыл бұрын
It's still gonna be a while before that test gets finished.
@riveralley5 жыл бұрын
@@UnofficialAudio When like a year?
@josephdrago555 жыл бұрын
@@UnofficialAudio Can't wait! Actually got the nsv4 18 this past Thursday though.. 7cf - dual 18 passive radiator install
@UnofficialAudio5 жыл бұрын
If that's what it takes. If I rush it and half ass the test that won't be any good. I might have to amke it a multi-part series to get some more footage out quicker.
@isaacdaughertycoventryindu73745 жыл бұрын
Damn bro right on Thursday lol
@AintloudSam5 жыл бұрын
Yes sir heat heat and more heat!!
@dcraig635 жыл бұрын
Stuff is a pain to work with, but is very strong and it shows on the meter.
@hammerhead6125 жыл бұрын
you got to cook it!
@MrLopezda7815 жыл бұрын
I cooked on 3 layers pain in ass but worked on my van. I used a torpedo heater to get it soft first then torches
@edud84525 жыл бұрын
cook it on boys😎
@smokeythomas44075 жыл бұрын
Bro..u need some lights in video .always so dark In your car videos
@AdmiralTom5 жыл бұрын
Agreed
@UnofficialAudio5 жыл бұрын
There's really nothing else to see. The deadener is black too so you'd just be staring at black deadener.
@AdmiralTom5 жыл бұрын
@@UnofficialAudio but as a tutorial you leave the video not knowing what texture it's supposed to take. Don't get me wrong, I'm probably never gonna need to install this and I enjoyed the video, just thought it'd be good to consider
@AntonJMiller5 жыл бұрын
That's H AND H technologies. Not Vibraflex. Slightly different product requires less heat actually vs real vibra and the glass plastic beads. Just keep in mind that if it has the honey comb style it's h and h. If it's wrinkly it's Vibraflex. PS heat gun works great. Just need to soak it. -Anton, the deadener guy
@UnofficialAudio5 жыл бұрын
This stuff is not from anywhere called H and H Technologies.
@AntonJMiller5 жыл бұрын
@@UnofficialAudio I don't doubt it could be from somewhere else that manufactures with the same machines they do. I just know alot of people get Vibraflex and straight bitumen dampeners confused. Typically the stuff with the honey comb is more for the industrial application (sinks, HVAC, studios) it lacks the polymer blend, not saying you can't find the honey comb and polymer blend but certainly is what I have found.
@TheQuadfather19765 жыл бұрын
Shop light :)
@MadDragon755 жыл бұрын
I'm experimenting with a homemade 2 part sound deadining. I'll let you know if it works.
@dbdragpr5 жыл бұрын
No problem installing it incentral FL during the summer, youll lose a few pounds in the process too 😂
@josehccaluna59674 жыл бұрын
Did you do anything to floor infront of b piller?
@Demobrosofficial5 жыл бұрын
Did you say cook it on?
@trecedaves31595 жыл бұрын
More how to videos
@clintonpowell17165 жыл бұрын
Hi I have a question for yall. I have two sundown x15 d4 and a sundown 4000watt amp. I wired the subs to a 1ohm load, and the subs are barely moving and the bass knob keeps say that the subs are clipping
@bryantoole3809 Жыл бұрын
I have a 2018 f150 (has an aluminum body) I bought vibraflex 190mil .. I originally planned on using just a heat gun cause I don't wanna damage my trucks roof.. however after watching this feel I need to torch it also... if I apply to the roof and then use a torch will the heat seap through and effect my aluminum body? Any advice?
@Mani-aX5 жыл бұрын
have to be really devoted to sound deaden, as that would take a lot more time to install compared to the peel and stick (dynamat) material. nice video.
@UnofficialAudio5 жыл бұрын
No doubt vibraflex isn't for everyone. It's for more than just sound deadening. It's for panel strengthening.
@shaneandkatie1 Жыл бұрын
How many layers would you do on that ride
@ostube60355 жыл бұрын
Lookin for some input for a trunk build In a 04 accord. I think I want to go with one 15" in a sealed box. Reason is power, I don't have a lot and I want to get the most out of it. Now from what I understand when you use a vented box you lose an estimated amount of amplifier power, and control and longevity of the woofer for a small peak to peak range of freq. so I think I want a sealed box for better music reproduction and longevity and efficiency. What sundown 15" sub would be best in a sealed box with my Rockford 1001bd 1083wrms @2 ohms amp? Are the blow through style 4th and sixth order boxes I see everywhere that incredible or is it more for competition? Aero port..any opinions over expensive kerf cut boxes? If you design a box that is larger than the speakers Ts specs how much larger of a box can you go before it's a problem controlling the woofer and damaging things? Sometimes I see these huge boxes and wonder no way that's a spec box for that 8"/s in a 4 cube box..is that because it's grossly over powered and the amp can control the sub/s or what? All and any useful input is greatly appreciated. Thank you BassHeadsRule
@daytrace46355 жыл бұрын
bigger box is more efficient, can get same results with less power, handling more power in it will most likely blow a sub, ported uses less power than sealed and if you want a box to listen to a variety of stuff I suggest a 4th order, fairly simple to build, you need to see what the ebp of whatever sub you want to put in anything below 100 can be used in 4th order or sealed box, closer you get to 0 is better for sealed, 100 ebp is usually only good for ported/6th order, good luck!
@ostube60355 жыл бұрын
Random Roger thank you I will keep this in mind as I get ready to build a box. Now to get that number I devide fs. And qes. Correct?
@daytrace46355 жыл бұрын
@@ostube6035 yes
@F_8_T_A_L Жыл бұрын
I have a Question Derrick , I am about to rip all of my cheap crappy KilMat out of my truck and go with the Ampere Vibraflex or Sundown deadner , but the question is , it’s gonna be in my daily build so when I do the inside of the doors , I will be limited to cooking every inch because well there’s very Touch small cavities to reach through to cook and Roll the deadner . I don’t want to cut my outside panel off and weld it back on the door just to deadner it . Do you have any advice for me ?
@kyledominique2060 Жыл бұрын
Can you apply 190 mil vibraflex over 1/4" plywood on a roof?
@mase72075 жыл бұрын
where do you get that stuff?
@UnofficialAudio5 жыл бұрын
Best place I know right now is Pure Pressure Audio. www.purepressureaudio.com/
@rickcreations13205 жыл бұрын
How much vibraflex did you end up using on the blazer
@UnofficialAudio5 жыл бұрын
Not done yet
@hinesvillebass67425 жыл бұрын
Ima guess between 50, 65 square feet
@rickcreations13205 жыл бұрын
Way more then that to do the whole truck
@hinesvillebass67425 жыл бұрын
@@rickcreations1320 true probly closer to 125
@rickcreations13205 жыл бұрын
@@hinesvillebass6742 good guess
@bdaudio93955 жыл бұрын
Why use this instead of normal deadener And would have been nice to see it lol can’t see anything with roof being black lol
@UnofficialAudio5 жыл бұрын
This is an spl build where strength is important and vibraflex is the strongest stuff there is.
@bdaudio93955 жыл бұрын
I’m a dB drag spl competitor from Australia (ask jockers he knows me lol) I’m mainly asking as my corsa has anywhere from 3 to 6 layers of “deadener” in most areas and yes I did see gains from this, so I was just interested in how much an if there was a lot of difference, be in mind we most likely can’t get that here in Australia but I’m always keen to see how things stack up against each other P.s love that some one on KZfaq is doing a proper spl build unlike sound man and fab kitchen lol
@UniCrafter5 жыл бұрын
@@bdaudio9395 theres dB drag in australia? where? I've done a ton of searching and not come across anything yet
@bdaudio93955 жыл бұрын
UniCrafter lol yea just jump on term pro all our scores are there and we have a a lot of competitors in Sydney and Queensland and a few in Melbourne and odd ones scattered over the rest of Australia lol
@CMEPUNKU5 жыл бұрын
why not just use 3/4 birch and 8x pl ....!! ??
@UnofficialAudio5 жыл бұрын
This is an spl build and that is illegal in competition.
@rickcreations13205 жыл бұрын
Depends in the class you wanna compete in
@F_8_T_A_L Жыл бұрын
This isn’t an Extreme vehicle bud
@F_8_T_A_L Жыл бұрын
Stock cabin
@jeremyeubanks23875 жыл бұрын
hard to see what your doing ..need lighting
@UnofficialAudio5 жыл бұрын
There's nothing extra to see.
@huggywuggy36085 жыл бұрын
Sundown Audio unofficial You said we were going to see the texture change.
@thisguyintxable5 жыл бұрын
Some lights would have been nice
@UnofficialAudio5 жыл бұрын
There was nothing extra to see
@HoUsEoFcAtS785 жыл бұрын
Why didn't you sound deaden the back part of the roof before installing the box? That would have made more sense.
@UnofficialAudio5 жыл бұрын
That makes ZERO sense. It would be a waste of sound deadener. That entire area is filled with wood and expanding foam. Having deadener in there would make ZERO difference except wasting time & money.
@petergersumky8135 Жыл бұрын
that's not Vibraflex ...
@briankeith10075 жыл бұрын
Why not use second skin,that's a lot of work.
@rickcreations13205 жыл бұрын
Vibraflex is WAYYYYYY BETTER
@UnofficialAudio5 жыл бұрын
This is an spl build where strength means everything. Vibraflex is the absolute best stuff out there for panel strength.