Hey guys! We've got a nice sale on our website for genuine dashboards! :) They all come with 110 BLE version, but you should be able to install Pro DRV through down_G with normal M365 display first. Available here: bit.ly/2WHhwuy

I had to try two times but now it works pretty cool stuff thank you

Thanks for sharing this, can't wait until we can change the settings on the new pro firmware :)

Огромное спасибо за видео и за ссылки на прошивки ! Все получилось установить и прошить, единственное не знал что можно было купить оригинал и купил реплику, при установке реплики необходимо сначала прошить , а потом уже монтировать новый блок, так как с блоком-репликой прошивка BLE зависает, но идеально прошивается на стоковом оригинальном. Всем успехов и еще раз спасибо :) Thank you so much for the video and for the links to the firmware! Everything turned out to be installed and flashed, the only thing I didn’t know was that I could buy the original and bought a replica. All success and thanks again :)

very helpful video and links, thank you! chnaged screen very easily

I am about to install mine. If I install the stock drv without the added speed. Will it drain battery faster or make the motors longevity less?

I managaded To flash only DRV file, but that was enough because xiaomis app loaded the rest of these files and now it works.

Thanks for the video, do I need to buy a new cover or the old one is ok ? THX

Have couple of questions. 1. Currently using custom firmware based on 1.3.0 which gives me about 23-25 km range on single charge. Is it possible to upgrade straight from 1.3.0 or do i need to upgrade to 1.4.3 first? 2. Whats the motor start speed? Is it set to default on the custom firmware? The only thing that stops me from upgrading the screen is losing the ability of zero start.

Nice video! Does custom firmware with unlocked speed has battery fix enabled? Thanks.

it worked for me, thankya!!

Thanks mate 👍🏻

Did you replace the circuit board option as well? Maybe that's the reason for the reboot difficulty.

A happy customer. I can confirm that this works on m365 1.5.1, after updating to 1.5.5 - just follow method 2 (I have not tried updating through Mi app). The quality is great and speed indication is really convenient. After updating to unrestricted 1.5.5, the scooter becomes really brutal (max speed 32km/h) and no more issues going uphill. Recommended!

Hello, good job. But I read somewhere that a user complains that he can not use the "cruise control" feature after the pro dash upgrade. Have you ever tested it on your scooter? Does it really go off after the upgrade? Thanks...

The plug from the circuit board to the speed controller is a different sizes and does not connect. can I splice them or purchase an adapter? Haven't been able to find anyone else with the same problem.

If for some reason the change of boards fails, or you simply don't like it, is there any way to revert back to the old board like nothing happened?

Is there a DRV firmware that can increase the speed limit to 35kmph?

Do you know when more displays will be in stock on your website?

If I install m365 pro dashboard to xiaomi 365 it will not drain battery fast. And how many km can i after installation pro dashboard.

Hi I have a Pro which I want to roll back to stock drv1.5.5 because I want the max speed back to about 26km/hr. If do this with the file on the link will the manufacturer notice it when claiming for warranty for example?

What must do if i want to go back in the original board and v.1.5.1??

Just in case, is downgrade hardware/firmware possible if something won't go right? I mean, can I reinstall dashboard back and would I need to upload old firmware release on that?

I just got a m365 scooter and made this mod (display and flashing to DVR155) can I update the scooter firmware using the official Xiaomi Mi home app? I have paired the scooter after flashing to drv 155 but, the Mi home app is prompting with a “new firmware available” can I update? Or is not recommended . Thanks

Good video, thanks. I am having poor battery performance with the stock 155 firmware after installing the Pro dashboard on my M365. I used to get about 23 km per battery charge, now after my test today, only about 13 km. And I have been riding the same. Wow, to lose about 10 km from a battery charge is enough for me to go back to the original dashboard and firmware. Any ideas on what to do? Going into Normal or Eco mode is much slower than what I had before.

If you set S mode will it always re-start back in the same mode?

I got dizzy, watching this video :)

So I installed this - and everything seems to be working fine. Went for a long drive tonight - and now it won’t charge the battery... what to do?

Hey guys, if I don’t need to do the speed hack, I can just DL the stock firmware from Mi Home China and it would be done?

how can i upgrade the firmware on the iphone app. i do not have an android phone. i have tried changing region to China and unlocked the scooter, and also reconnected the scotter on the iphone app - but the firmware does not upgrade and remains at 0%. the current firmware version is V1.6.0. please help me

Hey guys, please note that it might be just enough to install DRV 1.5.5 file. Please test it for yourself! :) Now some of your questions answered of scooter performance when installed everything like in a video: 1) We have noticed an increased acceleration and better performance uphill. This of course might drain your battery faster. And once again it's just what we've noticed ourselves 2) Scooter doesn't seem to be slowing down when it goes below 50%. It's a good thing for us, but if you want to maintain the battery you might want to change your riding mode to normal (not sport) 3) On 95kg load and tires pumped to 4 bars we have managed to do 16km and have 15% left (average speed 16.5km/h with some hills time to time). So let's say if we were to drain battery completely we should have got around 18-19 km total. Before, on the same load we used to get 21km from 100% to 2%. Scooter is one year old with 800km on it's watch so please consider that too 4) As you can see there is a slight difference in distance, but also a noticeable performance too (doesn't decrease that much when battery goes low) 5) The battery indicators on the LED display work perfect. Total distance driven on the app is working perfect too. However, the remaining estimated mileage will be off. On 100% it will tell you you have 45km left and will count it based on that Hope that answers some of your concerns! :) Overall we are very happy as the total distance covers our needs and slightly better performance is a plus.

I buy from your Amazon store a new motherboard for m365 pro , it works but i was flashed with gonka 155 before now maxspeed is 24kmh and down G say sent retry when i flash bin cant flash again now please help

Hello I am looking for the BMS 116 can you send me a link to recover the zip file thank you

Hi there, I need some help and advice with getting my m365 converted to m365 pro (replacing the display and flashing the firmware. I saw several videos, but when I checked the version of my firmware for DRV, BLE and BMS I found them being quite different from the ones that seem to appear on this video. My versions are as follows: DRV Ver 551, BMS Ver 551 and BLE Ver 1100. There's also a difference in the Scooter name: mine is MIScooter0598. It gets recognized by the official Xiaomi application as well as the M365_downG and the m365 Tools. I have ordered a Pro Display and when I tried disassembling the current board display on my scooter, I noticed that the pinout/cable endings of the 3 groups of cables seemed to be the other way round: i.e. if the new display had them as male endings, the currently installer one would have them as female, hence I couldn't install the display as such without having to cut the wires and re-solder them onto the existing cable endings. So, having explained what I have encountered, could anybody, please, answer the following questions: 1. Why would the pinout/cable endings be different? 2. Would cutting and re-soldering work? From a technical perspective, if I got the wires right it should, but I m just wondering why the video shows a direct replacement without any modifications needed and I have to go down this route? 3. Bearing in mind my current firmware versions (see above) and the Scooter Model, do you think I should be able to use the m365_downG tool an oatch the firmware versions to the ones for the m365 pro scooter successfully? Thanks, Petar

I have 1.5.4 and the speedo always shows 0. The Mi Electric Scooter Pro app needs an unlock six number code. I never set it with the old board. I tried 000000 and 111111 and 123456. I think that I need the newer version to get the speedo and battery level to work. Any suggestions?

Question: the 155 DRV file in the link in your description, works fine, but Im curious if there is anything special about it in regards to Pro dash on non-Pro scooter. Or is it simply one that was generated from m365pro.scooterhacking.org ? Im wondering if I can generate one of my own from that site, or if both the dashboard and scooter need to be Pro.

@myBESTscooter Hi I wanted to know I have a brand new m365 with version 1.5.1 already preinstalled with the BLE in 0.81 which blocks the changes. I wanted to know if with the dashboard pro I could Réinstaller par dessus la version pro du 1.5.5? Thank you so much!

Can you downgrade BMS and DRV to original after upgrade ? (for warranty reasons)

Thank you very much for the movie, that's what I was looking for :) However, I have two questions: 1. Is it really hard to remove these covers? How to undermine them? 2. What order should I keep when uploading the software? Best wishes and thanks again.

Took me a little to about 20 min's on a iPhone but got it work fine. Thank you for the video..

Hello, I have m365 with older battery with only one fuse and I installed display. Downloaded Stock driver155, display started to work, bud I feel thé power is lower then it used to be..Now I should download BMS file, but will be fine with this old battery or will I burn the fuse?

My new dash doesn’t show battery light nor does it have any data or able to see the settings of the scooter any help?

if I have 1s but pro1 display then I use 1s or pro speedhack? (sorry to my engilsh)

Weird, I can install the BVR file but not the BMS and BLE. Everything work fine except for the "red stop light", who doesn't work anymore.

BMS no me deja instalarlo .. se para en 97% ... que podria hacer ¿? lo demas.. hasta ahora todo bien ..

Is the battery indicator right ? Since the pro version is 45km and the normal only 30

Is there any issues with running the pro firmware considering the M365 has a smaller capacity battery and a 50w smaller motor?

j'ai un mot de passe que je dois mettre sur l'application mi home pouvez vous me dire ce que c'est

Hy , i accidentaly downloaded this on my norlmal dashbord. Now it is not worcking I mean ( A 1 circle is nlimcking and i can turn on the light and when i press 2 times on it it is not showing me green . Can somebody tell me what to do plase.

Can get mine to update keeps giving me the red flashing wrench and red flashing 10

Thanks for the awesome vid! Would this mod still work with an iPhone?

Mine won’t let me flash it. It’s says “unencrypted file needed”

I dont get a firmware update, what should I do?

Is there antoher way to download "m365_classic_to_pro.rar"? Filehosting.org doesn´t send an email link... I

Bms 116 ??

does anyone test yet, if M365_downG still detect the scooter after updated to 1.5.5? And is it possible to downgrade again to 1.5.1 or anything else?

do this work on the ninebot max?

My mx3 macwheel screen is broken how can I get another 1

Is there any difference between the original dashboard and the Aliexpress version (or other versions for that matter)?

Hey buddy I bought already everything and tried to install it. Just perfect. But I have one problem. The app m365 downg can't find the data that I downloaded. Can you help me? Friendly regards

hey , thanks you for the guide , but i have a problem , i manage to connect to scooter with M365_downG but I call "check ver " the is write "Asking Scotter Version" , but is get stuck there , dont give me any info

Hi there! Installing the new M365 Pro display resets the kms done with your old M365??

I just upgraded to the pro dashboard and have a problem. The bluetooth icon keeps flashing all the time unless I connect the app. I've done all the fw updates, yet everytime I power the scooter on it gives 1 long beed and 1 short and bt led flashes. I don't always need nor want to connec to phone and the flashing is annoying af.

@myBESTscooter I am doing exactly the same steps shown in the video, yet flashing DRV155 does nothing - no errors, the flashing seems to finish 'Done', but next time I check version, I still get the DRV151. The red error icon is still blinking on the dashboard. Any idea why that would be? I've already tried flashing multiple times with no success.

Which of the wires shows that the headlight is on?

Is there a pro firmware which it remove charging mode when connecting to an external battery

I've a dual battery with firmware 1.4.3, what is the performances of 1.5.5 firmware with dual battery? how to fix ixes issue of scooter going into charge mode with an external battery connected in parallel?

The link to download the fw doesn’t work (i dont’t receve the file by mail) do you have another link for the download please?

Anybody know if 3rd party apps like M365 Plus still work after installing this new dashboard?

Do I have to keep 1.5.5 only to have increased maximum speed? Or if i'm ok with 25km/h can I have the latest?

Hallo Ich habe Alles so gemacht wie ihr in dem Video aber nachdem ich DRV erfolgreich installiert habe und zum Schritt mit BMS installieren komme geht der Roller bei 98 Prozent aus. Habe es bestimmt 10 mal probiert... Muss man denn die BMS und BLE installieren oder braucht man das nicht? Bzw für was genau sind die da? Hoffe auf eine Antwort

what happens if I install m365 firmware when I don't have the m365 pro dashboard ? (I've ordered it but it will arrive in 3 weeks; can I still use/try the PRO features ? And if I want to revert back to the original (non PRO) FW , where can I find it ?

i am now using an android phone and have attempted to download the file M365 classicoto pro.7z. however the file can not be opened on my android phone. please help me

And how would you connect an old bluetooth module or do everything work?

Mine just shows 0km/h it's a M365 with a PRO display. What do I do? I have one more chance, I accidently flashed the pro firmware and broke one scooter.

Anyone can help me? I don't have an android phone but have a laptop google computer, when I got the M365 _downG it connects with the scooter but when I press on the check version it says failed retry every time! I've also downloaded the 1.5.5 firmware as well. Is it because I'm using a computer or because I need an android phone? Also my throttle has stopped working! the tail light flashes and goes out... help!!!

Is this possible with an iPhone and not loading the custom firmware? Will it work with the regular Mi app?

Hello, can anyone help me? I can't find how to install version 155, I bought the screen but it doesn't work, the version I have is 152 and I can't find how to install 155.

Can someone pls confirm if this will work with firmware v1.5.2? I don't want to buy if it wouldn't work anyway. Thanks

How do you change to MPH on dashboard instead of KM/H?

But can go back to the old board?

I bought the pro display online and tried to get to work with the “mi” stock app andnit couldn’t find it through Bluetooth as you said. So I have an iPhone 11, is there a pro version software app for IOS or is it only for android? I would love to have my new display work properly. Thanks

Anybody knows if works on version 1.52 please?

Anyone know how to do this mine keeps flashing 15 red

I’ve recently upgraded this mod on my brand new bike, I have error 14 beeping in all the modes it stop beeping the moment I turn on the head light. The bike works fine but the moment I turn off the headlight it beep and display error 14. Anyone know how to fix this?

how about motor start speed?

Trying to follow the instructions but M365_downG doesnt flash the BMS or BLE firwmare correctly. BMS only gets to 98% and the scooter turns off and BLE gets the error "cancelled due to retry". Any Ideas?

I have downloaded the zip file, but when I try to flash it, the app disconnects at 95%. What shall i do?

Install went great but can’t go from Km to MPH. How can that be done?

My new pro dashboard won't let me upload firmware 155. Any help you can give me?

I have 1.5.4 frimeware. Work?

I have burn the motor with it and a new electronic board. Need to find an other motor with others data sheet.

hey i was downloading one of the 3 files and it compltly locked me out of the scooter... im trying to "check ver" in the app but it does nothing so i cant get back in the "open bin" i cant turn off the scooter so.... what can i do?

Wondering if I can install this to another Electric Scooter with the same exact body type.

Hei sir! I have a one big problem with my scooter. I installed my new dashboard m365 pro, i added in Mi Home but is not possible to update firmware and in downg is not possible to check version. Please help me? I send you money for resolve this problem. In my town is not services for electric scooters.Thx!🙏🙈

Hi guys I can’t complete my pro dash change as when it asks for update firmware it doesn’t go past 0% and then says error accures any ideas??????

can i install this on my ducati pro 1 scooter? pls. help

Does this upgrade change the performance and range?

I have a question?i need to put my mobile number in this apps?

Do you know exactly where the big cable with round blue adopter going? What is it for thanks..