Full video and how to replace a chain: • How to CHECK CHAIN WEA... #Shorts
Пікірлер: 140
@freja17233 жыл бұрын
Brb finding a tape with inches in europe
@kottelkannim49193 жыл бұрын
At least geographically the country of origin of the Imperial System is still part of the continent... Try a stationary shop that sells 30cm/12" rulers (made in the PRC), or sewing notions shop. Aliexpress/Ebay/Dresden-based-Bike24 is an option as well - in that case you may order a chain checker.
@freja17233 жыл бұрын
@@kottelkannim4919 exactly, nice trick, but I'll just get a chainchecker because I won't use the inch ruler for anything else, so better get a dedicated tool
@kottelkannim49193 жыл бұрын
@@freja1723 You could use a ruler to check spoke length in case you need to replace a broken spoke or a bottom bracket shell length, or the width of between the dropouts... Once you get a ruler, I guarantee you will find many uses for this ancient tool. I keep rulers around just to make sure I am not crooked. I use the Imperial scale for this purpose...
@sw963 жыл бұрын
2.54 x 12, aim for that in cm 😁
@4evrmind3 жыл бұрын
😂😂
@drmoynihan3 жыл бұрын
So Clear. I have heard of the ruler method and now I've seen it. I just used it and my chain is fine, but I have a spare in waiting. :) Thank you Syd.
@Dog-Girl-Defect3 жыл бұрын
If my bike can still run, nothing needs to be replaced.
@kokopuff1933 жыл бұрын
Yeah. It’ll just wear out your center cog and rear cassette slightly.
@benjacobson74903 жыл бұрын
I've never seen the ruler method, very helpful
@emanuelpersonligtilpasiiin93313 жыл бұрын
Im sry she said 1/16 what a dumb system use mm
@n.gineer81023 жыл бұрын
Ruler doesn’t work, use chain gauge.
@benjacobson74903 жыл бұрын
@@n.gineer8102 and why should I trust you, mr know it all?
@lijhay28892 жыл бұрын
@@n.gineer8102 Don’t act like you’re an expert lol The ruler method helped me know if my chain is worn out or not and it’s already quite wornout
@djogz2 жыл бұрын
@@lijhay2889 the measurement from pin to pin never change. The chain doesnt really “stretch”. Sorry
@neiltibbs6483 жыл бұрын
I tests my chain when it brakes 😂 love the videos 👍👍👍
@nibrasulhaque20832 жыл бұрын
Me too😂
@Theclarksonmtb2 жыл бұрын
The ruler method is fine for measuring pin to link wear, but the more important measurement is to check the roller wear with the tool or use a vernier caliper gauge
@dOoMnX Жыл бұрын
Nope. We really care about the pin to pin distance. This is what causes the elongation and wrecks havok to the cassette and chainrings.
@Theclarksonmtb Жыл бұрын
@dOoMnX if you go by the pins then the drive chain will be long gone before then, the internal part of the pin which contacts the roller is the highest wear point, that's why all chain check devices measure there and not the pins on the external
@dOoMnX Жыл бұрын
@@Theclarksonmtb Not at all. You are misinformed. The rollers float on the inner plates. Whether they are oversized or shrunk due to wear it doesn't really matter as long as they always fall in the right place between the teeth. Only the wear between the pins and the inner plates can make them misaligned.
@kennethblack62372 жыл бұрын
I just ride until it all falls apart 😀
@shitscoolisnt10 ай бұрын
💀
@nickdaveNDM3 жыл бұрын
I ride bmx not MTB. I snap chains too often, I'm switching to a shadow halflink soon, I used to run one and it was wonderful
@atreyuwings2 жыл бұрын
First method checks wear on the roller bushings. Second method doesn’t account for roller wear and only tells you if your chain is “stretched” which isn’t how chains wear out.
@dOoMnX Жыл бұрын
You got it wrong. Both methods measure pin to inner plate wear diregarding roller size/wear. CC-3.2 from Park tool is affected by rollers and can't measure newer chains accurately. If you look closely at the one side there is a spring that pushes the roller to the left, same with the other side.
@djogz2 жыл бұрын
The distance of the 1st pin to the 24th pin will never change because the plates never stretches. The rollers inside is the one that wares out. The cylindrical rollers gets thinner from constant rub from the teeth of the gears. Once worn out, the chain checker falls in between because the teeth of the checker is on a thinner rollers. One tooth the right side of one roller and the other is on the left side of the other roller.
@sydfixesbikes2 жыл бұрын
You are correct in how they wear, but the distance between pins will change. Promise.
@djogz2 жыл бұрын
@@sydfixesbikes thanks for responding. I like all of your videos. Including your rehabs but this one triggers me. The metal plates does not stretch. Thus the distance of the pins will not. Pitch of the rollers change. As the circumference of each rollers decreases from wear, 2 rollers with pins on the same spot, will have a lesser pitch. Roller on the left will be thinner and roller on the right will be thinner. If the plate does stretch, the chain gauge should not fit a stretched chain. But it will fit and it drops when it’s worn.
@sydfixesbikes2 жыл бұрын
We've had this discussion with people before and looked into it too make sure we were giving accurate information. You are correct that the metal will not stretch. But the distance between the pins (not pins on the same link, but pins on adjacent links) will change over time because of wear on the pins that make the diameter of the pins smaller so adjacent links move apart. We agree that the best way to measure it is with a chain wear indicator, but not everyone has one of those and the ruler method does, in fact, work too!
@sydfixesbikes2 жыл бұрын
I think we're really agreeing here, we just want to clarify that the ruler method does work
@djogz2 жыл бұрын
@@sydfixesbikes it does not work. The chain does not stretch. The roller wears out and its circumference becomes thinner.
@imrekovacs44742 жыл бұрын
And how long it has to be in centimeters?
@EGL24Xx11 ай бұрын
If you want accuracy, start with the first number with a printed line. In this case from 1 to 13 instead of 0 to 12
@dtowler53 жыл бұрын
If it's just the rollers that get worn away (the plates aren't actually stretching), wouldn't this imply that 24 links will always measure 24 inches, regardless of how worn the chain is?
@sydfixesbikes3 жыл бұрын
Basically it's the intersection between two links that wears (the roller) so when that wears, the links start having a bit of play in the intersections which allows them to pull apart slightly, this making the distance longer between the pins. Does that make sense?
@daylightsensor86953 жыл бұрын
@@sydfixesbikes so wait. are the plates connected to eachother via the rollers?
@sydfixesbikes3 жыл бұрын
They're connected via pins which the rollers surround.
@connormwalsh3 жыл бұрын
You had it correct the first time. Technically chain stretch is the pitch of you chain is longer. The rollers on the interior are what changes the links on the outside do not. You chain does not get longer this is horrible information
@dOoMnX Жыл бұрын
@@daylightsensor8695 the outer plates are connected to the inner plates with the pins. The rollers rest losely on top of the inner plates. It is the first interface that gets worn and elongates the chain.
@Skizm_admin11 ай бұрын
Brilliant tip, well explained too!
@ZSmith-yy4lv Жыл бұрын
I use the infallible method of waiting for it to snap off. That way I can say without a doubt that the chain needs to be replaced.
@adspremiumwepaypremiumfora14692 жыл бұрын
Well damn never had a bike long long enough to even have to check it
@ciaranheavin8978 Жыл бұрын
Great videos. Thank you 👍
@markkennethcelis Жыл бұрын
keep continuing creating these kind of videos
@si3gnal2 жыл бұрын
Your vids are AWESOME!! I successfully bled my brakes based on the information you provided in one of your videos!! Thanks, AGAIN!!
@mjsmjs79052 жыл бұрын
The second method doesn't work. Chains don't really stretch, they just give the illusion of stretching, it's the insides that wear out.
@dOoMnX Жыл бұрын
They do measure longer as they wear out.
@randomusernumber1 Жыл бұрын
My chains have this nifty feature when they tell me when i need to replace them . SO how it works is i will be riding along and my chain will break , and that is how i know i need a new one :)
@XKsavX666 Жыл бұрын
KMC digital chain checker is a big investment but worth it
@dOoMnX Жыл бұрын
It's not suggested anymore because it is affected by roller size/wear and doesn't work on newer chains with oversized rollers. Use the newest chain checker from Park Tool or the one depicted in this video. Or a tape on a tensioned chain.
@kiran.c42893 жыл бұрын
Love your videos keep it up 👏👏👏👌
@mjgomez85032 жыл бұрын
Me with my chain being all wiggly wriglly at the bottom: oh... I think its okay
@guandasin30992 жыл бұрын
Awesome content here!
@raymondstonesifer90715 ай бұрын
GREAT!
@thecountryog Жыл бұрын
I just pull the chain on the front chainring if it's too loose I replace it
@Radhe21345872 жыл бұрын
I love your t shirt looking so cool 😍
@kalijasin2 жыл бұрын
Thanks 😊
@ToxicVaccines_HivHoax Жыл бұрын
What is one/sixteenth of an inch in centimetres?
@sydfixesbikes Жыл бұрын
2.54/16
@shintarolin19332 жыл бұрын
amazing tips, as usual and thank you, I would appreciate it, if you add cm to your measurements as well, thanks
@dOoMnX Жыл бұрын
Multiply by 25.4 to get the numbers in mm.
@n.a.37342 жыл бұрын
thanks☺️👌
@Belka_choli Жыл бұрын
Вытянутую цепь слышно по звуку переката, а этим калибром пользуются только в мастерских!
@bilalahmadnazroo4692 Жыл бұрын
Beautiful
@hikingwithsaabath957 Жыл бұрын
Also Need to consider what is the speed, 9 speed or 11 speed
@giordanosousa9513 Жыл бұрын
On the 2nd one I don't need to use a ruler or measuring tape I can just use my coc-
@bertintom94152 жыл бұрын
Thanks
@CaptainLian Жыл бұрын
should the chain be on the smallest cog or the largest during the check?
@sydfixesbikes Жыл бұрын
Doesn't matter. Generally somewhere in the middle of the cassette is easiest
@seanflorian46532 жыл бұрын
"more than 1\16th off" Your scale only goes to the 1\8th
@bodhiodo_3 жыл бұрын
Can you plz explane if you need to shorten a chain i have no idea if mine is to long
@sydfixesbikes3 жыл бұрын
Watch the full video (link in description) to see how to size your chain.
@MaQuGo1192 жыл бұрын
How many carrot seeds are 12 inches?
@HughWoo2 жыл бұрын
The 12 mark??? First time I’ve ever heard that before.
@dwight65023 жыл бұрын
Im on a really tight budget. I will only replace my chain if I see a bump or it doesn't sit well on my chain ring. Im using my shimano hg 10 speed chain. More than 1,500 km already and its still looks fine with maintenance of course. 👍
@WillCPunk2 жыл бұрын
That methods costing you more in the long-run though, as you'll need to replace cassettes and chain rings sooner.
@dwight65022 жыл бұрын
@@WillCPunk well my chain still works fine. If I hear a creak or looks loose ill replace it. I regularly clean it and lube it thats why I think It still works fine
@WillCPunk2 жыл бұрын
@@dwight6502 chain wear isn't visible to the eye. You're free to do whatever you like but I implore you to google zero friction cycling and follow his guides.
@terryl8587 ай бұрын
Thanking you
@idohavewlsgt88372 жыл бұрын
👍tnx
@alis94252 жыл бұрын
Cool, but most who ride a bike to get places will prob just wait till the chain breaks
@cinelli074 ай бұрын
Your shirt with the cyclist kissing a girl is awesome. Where can I get one for my girl?
@LongTran-gk4hb Жыл бұрын
My bike Chain cassette is brand new 9 speed I have watch it pay attention to it clean it to
@JamesRaymer-dn9jd8 ай бұрын
Wow you’re pretty and intelligent. I don’t know much about bikes but I’m buying one today and it’s a 26 inch 24 speed Hiland mountain bike. I don’t do much mountain climbing matter fact I don’t do any. I bought it because it was on sale and I turned 69 years old today so I thought why not. I like to go exercising bike riding once in a while and walking so here we go, but I like watching you because you explain every detail perfectly and I learn from you so far I did not know about this chain results now I do Like it when you was doing the gears and the difference in brakes and things like this and now I’m glad I found you again so I can start watching your videos again you and your friend are good teammate
@warrenjordan52422 жыл бұрын
I m in love 😍
@Dustydayzz Жыл бұрын
Bruh i had to do conversion math for 1/16 of an inch 😐
@mattgunney26183 жыл бұрын
very cool .
@turboflush3 жыл бұрын
If it breaks.. Its time. Hahahaaa
@thatbikerdude13782 жыл бұрын
I did not have to do any of that. I knew its time for a new chain because I found it fly from bike and land at the crosswalk. 🤣🤣😅😅😇😇
@waynehoniball58742 жыл бұрын
love you
@Jay_Bonjoc3 жыл бұрын
She kinda looks like Michael Schumacher
@haroldharina732 жыл бұрын
Does it also works on fixed gear chain?
@sydfixesbikes2 жыл бұрын
It should
@haroldharina732 жыл бұрын
@@sydfixesbikes okay thanks
@dOoMnX Жыл бұрын
Single speed chain should be replaced as it reaches 1% stretch, or 12 1/8 inches in this example.
@ismailhakkogretici34293 жыл бұрын
Allah razı olsun sayende bisiklet hakkında çok şey ögrendim. Türkiye istanbul
@nicomolon76753 жыл бұрын
Armanem babaner di çarçafim
@rcclappers38643 жыл бұрын
Never knew that tool existed
@username63333 жыл бұрын
It's mountain biking, they have a tool for everything and people with a lot of expendable cash to buy niche tools😒
@jesperhagstrom3 жыл бұрын
Yeah it's a strange take on a regular measuring tape but the unit is based on one's thumb I think?
@kentlafadchan55662 жыл бұрын
GUYS LET'S JUST BE CLEAR THAT WE JUST CHANGE OUR CHAIN IF IT'S ONLY BROKEN,or snaped 🤣🤣🤣
@demisexgodfromhell Жыл бұрын
Real people use METRIC 👍
@beckygerona32842 жыл бұрын
if you replace your chain with new, your cassette might not be compatible with it. it will jump to other teeth
@justanobody8912 жыл бұрын
Its just a bicycle, run that shit till it snaps. More and likely never even going to happen.
@Fran-gl4rh2 жыл бұрын
That's just wrong. In the long term it's gonna cost you even more since a bad chain will ruin your cassette.
@ZimmerZirwes3 жыл бұрын
One sixteenth of an inch? Just use millimeters instead. Americans are so american.
@sydfixesbikes3 жыл бұрын
If you want to measure 1.588mm, feel free. 1/16th of an inch seems easier especially because most rulers in the States have 16ths marked 😉
@l.siestador72482 жыл бұрын
This time, Darwin got schooled. Lol
@ZimmerZirwes2 жыл бұрын
@@l.siestador7248 I just intended to say, that most Americans are too proud to adapt to something. If "most" rulers have it, why don't they use mm? Every ruler has mm. In almost every other country. Great Britain for example changed to a dual measurement system, too. Inch, miles, whatever. That unrefleced proud is what makes America one of the countries, that developed in the wrong direction for decades now. Everybody realizes this, except lots of Americans for its own. So I don't think, that I got schooled here.
@l.siestador72482 жыл бұрын
@@ZimmerZirwes We (Americans) learned both during school. Math and science classes are taught using metric. Sure, metric makes more sense in many cases but speed limits, weights and measurement generally use American system. We like our own system. A foot is a foot in length. Power is measured relative to a horse. I'll give you the percentages of inches measured in 16ths. That does need to change. Anyway, just ribbing you a little since your name is Darwin. Peace.
@dOoMnX Жыл бұрын
@@sydfixesbikes you would measure 20 links/40 pins for an expected length of 508 mm. If reads more than 511 mm it's more than 0.5% worn. If it reads more than 512mm it's past the 0.75% mark. 513 mm would be 1% wear.
@Chungustav3 жыл бұрын
Never replaced a chain, ever.
@owenissimo3 жыл бұрын
Y
@hamadalshamsi110 ай бұрын
What is a 1/16th of an inch!!! American shouldn’t be doing clips for the rest of the world until the adopt metric system.
@godofredomarquez85783 жыл бұрын
👏👏👏👏👍👍👍💖💝💞💕😍
@crowwolf45973 жыл бұрын
Доброго времени суток! А можно с переводом на русский?
@nicomolon76753 жыл бұрын
Нет бля
@crowwolf45973 жыл бұрын
@@nicomolon7675 во бля
@alexbourgon29683 жыл бұрын
Nevers knew too but good tric to Know also with the tape
@elviscaragea44333 жыл бұрын
More than what? pls speak european
@benjamindover10173 жыл бұрын
You cute af girl
@oliverblack54773 жыл бұрын
I just used the ruler method and 12 inches covers 25 links and not 24... That's not good 🤣🤣🤣 Is the ruler method universal for all chains? Mine is really old and has been used a lot without replacement, but 25 seems like a lot.
@sydfixesbikes3 жыл бұрын
Don't count the pins, count the links. Most likely you're counting the pins and including the one you're starting on, thus getting 25. Measure from the center of one pin, count 24 links (or pins, just not the starting one) and see if that lines up better!