How to lay a patio

Рет қаралды 2,667,515

12 жыл бұрын

Watch our step-by-step video showing how to lay a patio, with expert advice and top tips to help you complete the job with confidence.
Visit the official B&Q KZfaq channel. Here you'll find the ideas and know-how you need to make your home improvement dream a reality: / bandq
Need a helping hand with your DIY project? We're always uploading new videos, so whatever your project, we're here to support you 24/7. Subscribe today so you don't miss out. kzfaq.info_c...
Buying in bulk? Let us get it to your door.
For more advice go to www.diy.com/advice
To shop at B&Q go to www.diy.com
Join the B&Q Club for exclusive offers: www.diy.com/club
Like us on Facebook: / bandq
Follow us on Twitter: / bandq
Be inspired on Pinterest: / bandq
Find new ideas on Instagram: / bandq_uk

Пікірлер: 139

@teddybear1829 4 жыл бұрын

Well spoken and explained calmly and perfect

@TomRipley7350 4 жыл бұрын

Best piece of advice: always do a dry lay before you commit. You can apply this to many areas of your life.

@YeastyBoy 3 жыл бұрын

This comment alone deserves more likes @Tom

@michaelingram8056 3 жыл бұрын

Do it a few times, just to be sure.

@footyball66 2 жыл бұрын

I wouldn't want to dry lay my wife before a wet lay.

@michaelingram8056 2 жыл бұрын

@@footyball66 I have heard that your wife likes a strong sand cement mix

@philrotherham8822 2 жыл бұрын

😂

@jayp5590 3 жыл бұрын

I'm no pro but I'm surprised that dot dabbed it. When I was younger working on construction sites that was considered a proper corner cutting method and open yourself up to a lot of problems down the road!

@Pichustrikesback 5 жыл бұрын

Very nice job! I would like to add that the five points method is not recommended in areas with freezing weather because when water enters the hollow spaces under the stones it will freeze, expand and break everything in the winter. To avoid this you must put a bed of cement under each stone, so there are no empty spots under it. It is a bit tricky and you may need to play around with the cement, adding or taking out some, little by little and hitting your slab with a rubber mallet to level it properly. Cheers!

@BarriosGroupie 3 жыл бұрын

That's the whole point of the subbase which drains the water.

@seagreenspiral 4 жыл бұрын

6:24 Well I'm blown away by that bit of advice; I dont know what I would have done without it.

@brianbadonde9039 4 жыл бұрын

Tom Camarata Wilhelm employee of the month cameo

@ABESuperKiteDay 3 жыл бұрын

I love going to B&Q and DIY projects. Great video. Thanks.

@bandq 3 жыл бұрын

Thank you! 😁❤️ You can also see some great projects on our Instagram page @bandq_uk and by searching #bandq #bandqit

@dannyboy9122 4 жыл бұрын

Never lay slabs on the old dot and dab method. The water gets in and they will start to rock. Lay them on a picture frame style full bed. This means when pointing you won’t have to ram the mortar into an empty cavity and also stops them rocking

@krirp 3 жыл бұрын

Probably suggesting to do it that way so you go back to B&Q in a few years to do the whole thing over again. It’s genius.

@Lacey75786 3 жыл бұрын

Was thinking the same the dot and dab leaves gaps under a you get weak points same thing with tiling you want as much of it touching

@misterjaypeasmith 3 жыл бұрын

What do you mean by a picture frame style full bed? I agree not going the 5 dot method!

@promodpromod 3 жыл бұрын

@@misterjaypeasmith mortar each slab area in full but leave one inch around the whole edge (like a picture frame) this will stop the mortar rising up the joints when you tamp down the slab. also - trying to mortar joints as shown here is amateurish, to mortar your gaps simply mix a dry mix then brush it in the gaps until your lines are perfect, then add the water after, use a watering can with a fine rose end and sprinkle the whole area(don't soak), the results will be a perfect smooth finish .

@misterjaypeasmith 3 жыл бұрын

@@promodpromod thank you! That makes a lot of sense. 👍🏽

@subzero8181 5 жыл бұрын

This guy just cleared a lot up for me . Thank you for the video .cant wait to get started this weekend

@MS45636 Жыл бұрын

how did it go?

@Briquette1000 5 жыл бұрын

Great clear video, thanks.

@davecowan217 6 жыл бұрын

Great DIY video, yes B & Q is about doing it yourself and this video has great money saving tips. Yes we could all call in the professionals and cost us an arm and a leg (and then you still may get bodge job Bob in anyhow)

@therealbeav 4 жыл бұрын

So do it this way and guarantee yourself a bodge job! NEVER LAY ON SPOTS

@southengirl1 6 жыл бұрын

thank you very helpful

@martynm.449 10 ай бұрын

Block and Quayle is a great shop!

@fdelarosasr 8 жыл бұрын

this very informative video

@ukdodger 10 жыл бұрын

Well explained. Thanks.

@dabhandconstruction527 5 жыл бұрын

If you want to see more transformations, check us out

@rajeshfloorings5634 5 жыл бұрын

Good job

@syedismail4652 5 жыл бұрын

Very helpful tips. Thanks

@adhamsadoon1707 6 жыл бұрын

Great job . I enjoyed watching . Regards

@dabhandconstruction527 5 жыл бұрын

If you want to see more transformations, check us out

@thedocta704 8 жыл бұрын

cheers pal

@CarpMagic95 12 жыл бұрын

10mm is the recommended gap to have. Use gap fast spacers as they are a great itemto make sure you have the perfect gap between every single slab.

@baljeet50 10 жыл бұрын

nice one

@Birdsarecoolunlikeyou 2 жыл бұрын

Smart video! Thanks

@bandq 2 жыл бұрын

Glad it was helpful! 😊

@freakstate 8 жыл бұрын

Some great tips here, thanks for making it

@danh9225 Ай бұрын

Great vid. Very helpful.

@bandq Ай бұрын

Glad you found this video helpful! 😊🧡

@thecruzfam2800 5 жыл бұрын

What kind of cement did you use to mix with the sand for the fillers ?

@Reddylion 5 жыл бұрын

Nice !

@hablandolaverdad3792 7 жыл бұрын

Thank you lov it!! :)

@dabhandconstruction527 5 жыл бұрын

If you want to see more transformations, check us out

@ajunino12345 7 жыл бұрын

thanks great video.

@terryorford9554 7 жыл бұрын

bandq a

@diyman-kf3rg 7 жыл бұрын

Very good video .

@gasparelabarbera1386 7 жыл бұрын

d.i.y.man K

@Dan-lm9uq 3 жыл бұрын

Hopefully guna try this with your guide , thanks.

@TyroneFX 5 жыл бұрын

🐜🐜🐜 we love spot laying thanks

@hungfaili19 3 жыл бұрын

Thanks

@bandq 3 жыл бұрын

You're welcome 😁

@l3tsflyhr 2 жыл бұрын

Really helpful with filling mixture thanks

@bandq 2 жыл бұрын

You're welcome 😊

@Simon_B 4 жыл бұрын

5 cm mortar bed, is that before it’s compressed?

@usernamemadness 9 жыл бұрын

Do you put the 50mm of sharp sand down before you put down the cement? Also, what's the large headed nails for that appear on the list on the end? I don't recall their use in the demo?? Thanks

@josephboyett6957 7 жыл бұрын

bandq I'm gy

@JAY2011IRL 3 жыл бұрын

Do you have to set a fall if you are away from the house ? Like in the middle of the back garden ? (3 meter paving circle) or will water gather on top if I don't.

@bandq 3 жыл бұрын

Hi, the purpose in creating a fall is to direct water away from places you don't want water collecting, particularly by a house 🙂

@smfvmd 4 жыл бұрын

I wouldn't fancy laying 25mm thick paving slabs on anything other than a dry mix sand and cement bed. Drop something heavy on such a thin paving supported on five dabs and it's likely to break it.

@samueljgbxxxzFreeSpiritzxxx 11 жыл бұрын

i mite be attempting this soon , wish me luck

@norm4260 3 жыл бұрын

Judging by his spelling I doubt he was even able to find his way to B&Q.

@kierenboimufc5940 3 жыл бұрын

@@norm4260 😂😂😂😂

@robakles1 3 жыл бұрын

@@norm4260 probably was looking for Bee and queue thinking it was a pub

@payne02000 2 жыл бұрын

DIY at its best 🤣

@bandq 2 жыл бұрын

You're too kind! We're glad you enjoyed it :)

@acewhistle 5 жыл бұрын

I'm planning to install a patio paving slabs in the upcoming months. The patio paving slabs will be placed in the middle of our garden. Do I need to create an angle to make sure the water falls down to the base or I can simply lay the slabs down flat? Many thanks.

@dabhandconstruction527 5 жыл бұрын

If you need to see some other content on patios, check us out Ace

@iangreaves7337 4 жыл бұрын

Better leaving no joints is best because it always come out with frost

@robertoconfessore2698 4 жыл бұрын

Great video, thanks. Do I have to take in consideration the level of the house’s damp proof?

@chrisdilsworth4682 3 жыл бұрын

150mm down from damp minimum splash👍

@robertbarel896 9 жыл бұрын

this is great video. don't you use sealer ?

@dmcg6074 5 жыл бұрын

Hi, is a weed suppression layer not necessary?

@barbarahiggins1664 4 жыл бұрын

@@bandq In other words, you don't know.

@buckygeo 3 жыл бұрын

Dry lay is a savvy tip. Good lists and safety reminders. The "lists" are not easy to find....

@reisjames991 Жыл бұрын

Hello, starting this tomorrow, stupid question maybe. But how did you know you have dug 125cm ? Thanks in advance

@bandq Жыл бұрын

Hi Reis, no questions are silly! You would measure the edge from the top surface to the bottom surface where you've dug into. If you want to ensure the centre of the area is flat, you can use a spirit level to check this. It'll be 100mm deep + the thickness of the slabs you're using. I hope this helps, good luck with your project! 😊

@footyball66 2 жыл бұрын

6:13 Sharp Sand? I was told building sand is the sand you're supposed to use.

@bandq 2 жыл бұрын

Hi, Sharp sand is a coarse sand used in screeding, block and slab laying applications and also for concrete mixing. Mixing it with cement and water makes a bricklaying mortar 😊

@snappyfish 3 жыл бұрын

I though 5 dollops or spots was a seriously bad idea? And I work with bikes lol

@tvs339 4 жыл бұрын

Good work. One thing that would've been more helpful. Could have done with better close ups preferably from above.

@davidguiney2550 4 жыл бұрын

Do you add a weed barrier?

@davidguiney2550 4 жыл бұрын

@@bandq thank you

@JamesJohnson-qs1ry 2 жыл бұрын

What about the slabs being laid above the damp proof membrane?

@bandq 2 жыл бұрын

Hi there, thanks for your question. This is a bit tricky to answer as it would depend on what you're trying to achieve. However, ordinarily a damp proof membrane on a property would sit 2 or 3 bricks above ground level, therefore the patio would sit below the damp proof course. This video demonstrates how to slope the patio away from the property to allow water to drain away from the property so therefore shouldn't interfere with the wall of the house either above or below the damp proof course. We hope this helps!

@jay-sees Жыл бұрын

6" below dpm, always .... ish

@LadyPuddyCat 3 жыл бұрын

I'm going to be making a patio area this week. Could someone help me with something please? If I dig 125mm for the sub base, sand and pavers. Will I actually need to dig a little deeper to allow for compacting the sub base and sand? 🤔

@TheKrs23 3 жыл бұрын

If your slabs are 25mm then 125mm is spot on put sub base in stage first let say around 40mm compact this and then add some more and compact again you should get around 50 mm compacted sub base then you can start instal slabs on cement but i would not recommend use the dot and dub method free space under may couse future problems

@ruslanrustam1860 3 жыл бұрын

Beutifull

@siobhanmcadam5104 2 жыл бұрын

Guys can I buy ready mixed cement to use instead?

@bandq 2 жыл бұрын

Hi, yes. Please see here: bit.ly/3iFu6c0 😊

@charliesloan4850 5 жыл бұрын

I'm gonna have a crack at doing my own now I know how

@jackwalker9100 4 жыл бұрын

Do it this way and you'll have plenty of 'cracks.'

@therealbeav 4 жыл бұрын

Don't

@jordansheppard8454 3 жыл бұрын

Never spot, and 50mm is not enough sub base.

@UKMonkey 5 жыл бұрын

So how do you know that the patio is flat?

@iamneallyons4263 4 жыл бұрын

@@_Soilwork not really because its not supposed to be level - its supposed to have a fall in it

@jones4009 5 жыл бұрын

I'm looking to just place pebbles down the side of my garden how deep will I have to dig into the ground will it be the same as this. If anybody can help thanks

@jones4009 5 жыл бұрын

@@bandq hey, thanks for the reply. I'm going to go in tomorrow thanks you.

@JasonTheOneAndOnly 10 ай бұрын

from what I've read, you should be using concrete, not mortar?

@bandq 10 ай бұрын

For a patio project, the thicker substance of mortar creates a better bonding element, acting as a glue for the slabs.

@DTS7709 4 жыл бұрын

6:07 you say make sure it’s level with the one before it. How can it be level with it if the patio has a fall in it? 🤷‍♂️

@David-cm4ok 4 жыл бұрын

How do you ensure water won't collect if it's level then?

@dannyrose5576 4 жыл бұрын

Level with the fall..... that the first slab sets.

@marccarter4469 4 жыл бұрын

Quite simple you make sure the edge you are laying along side your previous slab is level but the opposite edge will be a fraction lower and so on that way you get the desired fall for water escape.

@rw7799 4 жыл бұрын

didnt see the sand on the diagram

@ChipXMBR 4 жыл бұрын

Then slabs are all over the place 🙈

@BazColne 3 жыл бұрын

Pithy and well done.

@thehype3678 3 жыл бұрын

Don’t forget to RAM it in there

@stevet419 4 жыл бұрын

5 dabs? That’s a poor way to lay those slabs, perfect spot for ant runs etc plus only a matter of time till they start rocking 👎🏻

@AP-rp1vx Ай бұрын

Yep. Should be full bed

@deanasophia2468 4 жыл бұрын

What about when there’s a drain there

@mathewcarpenter9368 4 жыл бұрын

Never spot lay always full beds u numpty 🙈🙈🙈 also prime the back of the stone roll on (sbr) or other primer . That patio is not going to last bottom line haha

@cathalmurphy5166 7 жыл бұрын

Enmmm

@fdelarosasr 8 жыл бұрын

@tomwardle3692 5 жыл бұрын

Des Conner John casson

@tomwardle3692 5 жыл бұрын

@AACBrit 3 жыл бұрын

5 parts sand, 1 part cement BUT HOW MUCH WATER!

@AACBrit 3 жыл бұрын

@@bandq Brill, thanks for this reply, much obliged!

@footyball66 2 жыл бұрын

it states sharp sand, but I've been told by a builder to use Builder's sand.

@20mikegp 4 жыл бұрын

Expert Advice? Spotting is NOT an acceptable method of laying slabs. Water and ants WILL undermine them and if they are natural stone when they get wet you will see an outline of the blobs on the surface.

@miataylor4544 3 жыл бұрын

lmao "pathing is HARD work" 😈

@SilentLD 4 жыл бұрын

I'm no expert but at 06:50 the slab levels at wall look all over the place, as do the spacing of the slabs. Again, 5 dab method not suitable here. OK for wall tiles bearing no load.

@ricardosd12 3 жыл бұрын

yeh you're no expert

@SilentLD 3 жыл бұрын

@@ricardosd12 and apart from trolling people's comments you're an expert in..?

@ricardosd12 3 жыл бұрын

@@SilentLD I've got a degree in pulling women