I've watched this video like 587 times. Going to slam my Yukon Denali tmrw. You deserve great praise for enlightening fellow gearheads with honest step by step information. This is an honest channel with honest content. Bravo.

Why would you dislike this video. He told you everything you need to know.

Can't thank you enough. Ordered all the parts you have listed and dropped my 12 LTZ this past weekend. It was sharp before with 24" snowflakes, but this made it badass! Awesome channel, thank you for your patience in recording.

Man, where were you 3yrs ago when i did mine. That top nut for the tie rod was the devil with the axle in the way. Never thought of removing it. Good video. 5 stars.

MASTERPIECE ...LOVE THE STOCK RIMS

This is guy is a godsend. He helped me lower my Escalade. This dude knows what’s he doing

No need to explain why or what you choose to do to your vehicles...disregard the doubters. Awesome work .... sub'd.

Lowered the Escalade yesterday and part of today. Every part in your description was on point. I had to drill the front strut bracket hole a bit bigger and cut off the bottom of the lower ball joint. Other than that it fit on perfectly with a little elbow grease. Must have watched this video about 80 times to remember all the steps. Thanks again man! Video really helped!

Man your are the best been trying to find a video on a good drop for a Tahoe and your video is the best I subscribed and thanks for all the part numbers for everything you bought thanks

Finally started mine tonight literally watching the video as I go 😂

Great video and great detail and fantastic info and step-by-steps. Well done! -Chris

Looks a whole lot better after you lowered it. I wish you were in the Denver metro area, i would gladly pay you to lower mine...i have the exact same Tahoe, nervous about doing that job myself.

Looks so good man !! I wanna do this on my 04 Escalade

Those premium forged aluminum rims are better then most of chevys new 5 spokes today. One of the best rims ever made imo.

Malibu's Most Wanted yo!

Got it thank you hope to see an update video on the Tahoe soon she looks good after the drop

Looks SUPER good. How is the ride? Quick question - what size are the stock wheels and tires on that thing? I have a set of 22's with 285/35-22's from a 2001 tahoe that finally needs to be put to death, and this is what I'm looking to do. Just want to make sure the shoes aren't too big/small for the foot. THanks!

Ready to do this on my tahoe. Great step by step video. Now i gotta figure out what all that stuff cost in total

Twa Motorsport boss I must tell you man your awesome🙌🙌🙌 I have a gmc Denali I’m dying to drop. I have the Escalade 22s I would like to know what size are the factories wheels on your Tahoe . I also need to know how low did you go. I want my thrice that low just like yours. Thanks man

So glad you wore the correct team apparel lol

Very detailed video, I learned a lot, thank you.

Man I love your channel. You are like me.... low and mean is good. Always making the rides better. Keep up the good content, cant wait to see the green truck finished. I have a swb silverado lowered

19:34 are belltech castings always ruff like that ? I've never used their stuff just wondering

For a couple dollars, buy some 3/8 heater hose, slide it on the coil bottom and top, and it'll lift your rear over half an inch and I guarantee it's cheaper than the spacers. Had to do it to my 3rd gen camaro which has a similar suspension setup in rear.

Great video been looking to lower mine I currently have 2/4 drop with air ride system plan on doing the same as you did in this video. Any ideas on what I need for a 4/6 drop? I’m trying to get rid of all the wheel gap I can. Thanks and look forward to hearing back from you.

Damm dude..the lil' misses Tahoe looks sweet asfuck..and I gotta give you mass props for doing everything yourself right in your driveway..I couldnt have done that..nice work dude..I'm guessing your old lady gave it a thumbs way up..huh?..))

so w drop is it from the front and the back cuz I have a 2010 Tahoe and have a 2/4 drop but I'm planning on going with a 3/6

I just bought kits to lower my 04 escalade. I thought all I had to do was change the springs and add the shock extenders and install torsion keys for front. Trying to do a 3/4 drop. Thought it would be a piece of cake but this looks like to much work.

Love the Tahoe, looking for me one now because of you...LOL

WOOOOONDERFUL HELPER VIDEO!!!! I own a 08 Tahoe. The parts you have listed above is everything needed for a 2/4? Your free travel mod definitely gave me confidence on doing this work!

TWA.... Love your work man! Your videos are very thorough, and extremely helpful! Question.... Would you upgrade the factory sway bars to eliminate body roll, and enhance cornering? Thanks again for posting the great videos!

I know this video is older but I just did this exact drop on my Tahoe with the exact parts on this list and Holly s$&@ I love it and I’m shocked how sweet it looks and surprisingly drives smooth. The video was so much help awesome Tks

I noticed that the parts you're using come from different manufacturers. I see that DJM sell "complete kits". What made you decided on using Belltech springs instead of the ones available from DJM? Also, Maxtrax and Belltech kits don't require the control arm and sway bar to be relocated (they only have shock extenders). Is this a necessary step that yields better control/ride? Thanks in advance.

Great video, I'm not sure if I missed it but are you using your front factory springs? Also the rear springs are Trailblazer, are they softer in ride then the Tahoe/Yukon spring by Belltech?

Great video.. but the rear looks a bit off..could be the angle of the video..or just me...but it looks to be needing that 1inch spacer in the rear....

Hey Travis, did you reused the 18mm nut/washer from the top, or use the nut that came with the new struts?? Just curious, cause the Belltech struts I got, the middle threaded shaft is smaller in diameter than the original ones, so am I suppose to use that 18mm as a washer under the provided nut??

Great video. Thanks for doing it. What airlift bags would you use in those springs ? I have all parts coming for my 2014 Tahoe ,I pull a trailer.

Nice job. Looks great. Would like to see something like time lapse for some of the work instead of "this is what I need to do and here it is done" sort of thing. Like when you say I have to push down here and lift up there to work this out...but how did and what did you do? If you ever do this and keep the auto ride, would love to see that. Good job.

Swap with a Hybrid hood and bumper it will appear even lower to the ground no fog lamps though

This video changed my life....lol

Hey I see all your videos I have 2004 Yukon lowered and it was hitting hard in the rear when I got a bump I replaced the shocks and put new bump stops but now it's just sitting on the bump stops doni need to cut the metal plate or my springs are bad cause before the the new bump stops the rear had no tension on springs or shock it would move alot

Looks awesome I got a 4/5 kit w 24"s I'm about to do this helped tremendously. Did you have to have it aligned?

Please help me. I recently got a 09 Yukon that looks like that the rear started doing wackin noise Wat could it be

Thanks for the video you did a great job in it. Now if you can tell me about the ride is it soft like the Denali XL I'm assuming you know how soft it is almost like an old Caprice or is it tough ride like regular like 4WD?

Nice video man. In the midst of a 4/4.5 drop in my Yukon Denali. It’s been fighting me the whole way lol. Mainly the need to replace the ballpoints etc. One comment on the video. For the front of mine and the strut spacer. Per the chart I used 1-10mm for 2 inches. It looks like you may of done the same, it you were shooting for 3.5 inches. Just wanted to clear that up. Also on mine with the 5305 springs that I used, I had to get a tubular panhard bar to clear the stock exhaust as its 3.5 inches.

Great videos! Very informative! Question….I want this same drop..will these parts work on my 12 ext?

Awesome video!!! Tahoe is looking slammed. I just have a few questions since this video was made.... I have 2013 Chevy Tahoe LT with the third row seat. Will your set up work for me? Any rubbing issues? With the tires being black along with the body, it looks like the front would rub with going over a bump, any issues since this video was made? Would love to watch a video on how it rides and looks in the daylight... thanks for the help!!!

That looks pretty sweet!

Loved your video I just did this to my 07 Tahoe It came out very nice but I was wondering on your tie rod ends did you swap them the other way to where the bolt is face up instead of down?

Does it rub, with people in the truck?

Hey one more question by any chance do you have the part number to the bump stops you used after you did the free travel mod I saw that was the only thing missing from the whole parts list?

After you lowered it, did you get a small steering wheel shake? Just wondering cause I just got mine aligned and it didn’t fix the shake. Wondering if there’s something else wrong like the ball joints or something

Originally I wanted to do 2/3 but damn 3/5 looks sexy

LOL that Cali Lean

Hell yeah. KC. I'm from OP

Is there any issues on the axles running drop shocks and spindles only? Belltech said that it would cause premature failure if I did. I want to avoid drop springs. This set up seems perfect.

So the shock extenders are needed for a 5" rear drop.i have 07 Tahoe with a 2/3 drop street performance shocks no shock extenders with 24" wheels . ride is awesome.what sway bars would you use I have eibach srings belltech or eibach

I just lowered my 04 escalade 2-4 and the rear right is higher than the rear left about 1 inch. Did you have that problem?

Great video and instructions, much appreciated. I have a 2008 4x4 Avalanche with autoride and don't like how the front is higher than the back. To keep things manageable (have not done much work on cars) would be happy to just drop front. Do I understand it right that I could keep everything stock (autoride) just by using a drop spindle? And would it be better in my case to use 2509 instead of 2511 spindle you used? Thanks..

Do you have a part number for the bump stops or will any short bump stop work and where do you mount the new bump stop

Question. I want to do a 2/3 drop on my 02 Tahoe do I have to drill those holes and move my sway bar as you did for this one? If so can I use a cheap power drill from harbor freight I’m working on a budget and will be doing this in a apartment complex parking lot

Trying to lookup rear springs but belltech shows them as front springs. Did you use belltech alignment bushings?

Did you replace your headlights? If so what headlights did you go with?

Thinkin about doin this to my 2002 Burban it's 4wheel drive

I have a 2013 Denali. I lowered it with Beltech dropped spindles ang 2" springs in the front. I used a DJM lowering kit with a 5" spring from HD Suspension on the rear. I cant live with the ride. I want to hook the stock air ride back up. I will remove the springs on the front. My question is can I use the Beltech 4230 springs in the back. You really do a good job on your videos. I appreciate your clarity.

Awesome job…did you need shorter front sway bar end links? Or kept the factory size? Ty

Any idea how I can lower the rear of a 2003 yukon 6 inches? I can’t seem to find such springs for sale. Any insight on this? What it takes to lower even more?

Great video! I have a 2013 Escalade and will be lowering it too. I replaced my magnaride leaky stock shocks with Arnott SK-2954 strut for the front and AS m-2700 for the rear along with a bypass resistor. My question is if I lower it can I still use my new shocks or do I have to replace them with the shocks you used for the kit? I’m sure those new shocks would be shorter wouldn’t they? Hopefully I can use the ones I bought. Thanks for any recommendations

Question yea it might be a dumb one but how is the ride quality? I want to do this but bin holding off because this is the car we go on trips with ... also I have 24s you think this would be “too low”?

On a Tahoe same like yours what drop will the 4230 springs with 1in spacer give

Thanks for the video! how does it hold up over time? also, how does it ride? does it feel a little stiffer, sportier than stock? I love my 2007 tahoe but sometimes feels just too bumpy, i'm used to small sports cars.

How hard would you say doing the front spindle and strut is. I already did all the back along with the free travel mod.

How it goin bro. Hope you feeling well. I have a quick question? I finally receive all my part to lower my Tahoe. I can’t wait. I don’t want that Cali lean int he rear. Did you put the 1 inch spring spacer in the back? And how many rings did you put the in the front shocks.

Excellent video. Questions for you, if the vehicle was lowered by a previous owner, where to begin in identifying how low, what kit, etc? The ride is harsh AF so I'd like to keep the look, but make it a tad more compliant; you'd think I was on 22's with 20 series rubber...I'm not. I was thinking maybe just a shock/strut replacement but who knows if the kit was installed properly in the first place? Not sure where to begin in purchasing the proper replacement shock/struts. Thank you!

Awesome video!! Do you know if that is the same process with a 2016 Yukon?

So since you didn't keep it , I would like to know your honest opinion on doing this on a car I plan on keeping. Is there any reason why it would go through axles / u joints etc anything to keep it from being a non realistic daily driver. I just financed a 07 LT tahoe and I absolutely in love with the stance of your old tahoe. Great info and thanks for posting !!!

Why would you not want to keep the autoride..I love the way it works on my avalanche ?

do you know if i can get just the brackets them self for the lower control arms i got everything else but that is that what i need so i can sit lower? cause the back sits at 4” and i already notched out the lip on the frame

Looks dam good.... the G-Ride..

did you reuse the factory springs in the front of this tahoe? Im about to order my parts for my 2008 tahoe

Will those belltech rear springs work on a 05 Yukon? Why would u use those instead of stings for that year?

How much do you tighten the rear shock relocation brackets too. I did this drop and lost my bolts.

Love the step by step. i just got one question i been trying to find the torque specs for my self. where can i get them?

Did you reuse the stock front spring? That’s literally the only part that wasn’t clear. Great video!

i have a question so when you buy the 2” lowering kit for the front is it pretty accurate to the 2” ?

I'm not it all mechanic but what do u think is the right prise for something like that only labor work . Also is this schoks good and strong I have 24" rims and they are heavy so need good performance schoks

It's looks nice, you have a new suscribe here. Thanks

Thanks for the video good details but one thing how is the cv angles can you show them please because there are no videos on that because I have 07 Silverado 4wd it’s lifted now I’m thinking about dropping it on 24s

Like your video 👍🏻👍🏻 I have a question I had a lower I have a 2007 GMC Yukon with 3/5 drop on stocks 17” wheels I need replace the front shock but it look like they use stock shocks and just replaced with McGaughy's coil spring also on rear lower part you from DJM I Bought the same ones but it didn’t come with that threaded insert To bolt down the shock extenders

I have 2014 ltz same color scheme. I was just looking at replacing the shocks and struts... you changed my plans. Only questions I have is your preferred brands for shocks

hey man. i have a 09 tahoe i just got some 2inch drop springs for the rear. is there anything else that i need to buy to install?

I did a 3” level kit on d back only rides smooth but when I hit a bump feels rough do u know why thanks

I got a 2007 Tahoe just like yours 4x4. Can you please send all the part numbers if it’s possible, I appreciate it.

great step by step

Any alignment issues with the spindle and Strut combo?

Awesome video, about to do a 4/6 drop on mine. Did yours not have a rear panhard bar?

Need to order parts to do drop of my 2012 suburban 4wd. Cannot get to ur parts list. Great video thanks D

I just finished my order for all the parts you used and noticed you used the stock from spring. What is the reason for the stock front spring instead of a Belltech spring?

I Got a Lo Hoe To😂😂😂 I call her the White Ghost Rider everyody always telling me how much they love it and do i wanna sale it Helll Naww i had 2 Hydraulic Cars had my own Hydraulic Shop In New Orleans Old School Hydraulics now i let my nephew takeover Keep it in the Fam 😂😂

Hey I cut my rear springs and put shocks extenders and my tahoe bounce a lot is a 2013 tahoe