Lowering a Yukon Denali

No video

Lowering a Yukon Denali

Рет қаралды 93,634

Күн бұрын

Lowering a Yukon Denali
Kit Used amzn.to/2lvAdVe
How to Video on Tahoe with Torque Specs
• How to Lower 4WD or 2W...
Free Travel Mod Video
• Free Travel Mod When L...
Parts Used on that build
Front spindles - Belltech 2511 (only use if going 3" or more)goo.gl/LSmHEX
Rear Springs - Belltech 4230 (For a trailblazer but will work on Tahoe) goo.gl/FZFnY9
Front Strut - Belltech 25003 goo.gl/wNktSB
Rear Shock - Belltech 2410FF goo.gl/ZG2Tnr
35323 Belltech Rear spacer for 1" of lift goo.gl/D5AZBZ
If buying front and back together part number is 9505 goo.gl/pZz3su
Hardware kit for rear is DJM RK2007(This comes with shock relocations, lca relocations and sway bar end links)
Ebay sells the bypass units for autoride if equipped. ebay.to/2UmunFL
Bypass for Shocks amzn.to/2PqanAh
Hit the comments and let me know what you think......
Thanks For Watching!!!!
Subscribe and Follow TWA Motorsports
KZfaq: / twamotorsports
Instagram: / twamotorsports
Email: twamotorsports@hotmail.com
Video Equipment used to make this video(Need to update)
Gopro Hero 6 Black amzn.to/2NGLPxT
Gopro Session amzn.to/2IZprAp
OSMO 2 amzn.to/2s4NRxO
Osmo gopro adapter amzn.to/2IEwX0c
Video editing amzn.to/2X2W1Wi
Photo editing amzn.to/2X2W1Wi
I know that lately I have worked on a few other peoples vehicles but to be honest it pays and gives me the ability to make you guys another video. Today we tackle a lowering kit on my neighbors 2012 GMC Yukon Denali. I know that I have done a few SUV drops in the past but this one is a little easier as you don't have to do the free travel mod. He also wanted to get this finished while they were on vacation as a surprise. This install is very simple and instead of making another how to I decided I would do a time lapse to show the process. This lowering kit will also work on Chevy Tahoe and Cadillac Escalade. I keep doing these projects to save up money for more Trans Am Parts lol. Hit that comment section and let me know what you think of this style of video and the Denalis new look.....
As Always Thanks For Watching!!!!!!
SUBSCRIBE FOR MORE VIDEOS!!!!
Disclaimer:This video and description contains affiliate links, which means if you click on a product link, I'll receive a small commission.

Пікірлер: 504

@superduty4556 4 жыл бұрын

This channel is awesome because all your projects actually run

@TWAMotorsports 4 жыл бұрын

Well not all of them lol

@superduty4556 4 жыл бұрын

@@TWAMotorsports how's the dash on this one? Crack city?

@TWAMotorsports 4 жыл бұрын

@@superduty4556 you know it. They came from the factory with cracks lol

@jordanjohnson7264 4 жыл бұрын

Looks really good, I've always liked this body style Tahoe.

@TWAMotorsports 4 жыл бұрын

Thank you. They always look better dropped.

@MEANGENE 4 жыл бұрын

Your nabors see what i see a guy that do great work they brong it to the right person keep up the excellent work 🙌👍✌

@TWAMotorsports 4 жыл бұрын

Or a sucker lol. Thank you

@MEANGENE 4 жыл бұрын

@@TWAMotorsports 😁😁😁No problem✌

@TWAMotorsports 4 жыл бұрын

@@MEANGENE 👍

@robertdahl8779 4 жыл бұрын

The Suspension Doctor. Great video. Australia is watching you.... Well done very informative and great music.

@TWAMotorsports 4 жыл бұрын

Thank you. I appreciate the support

@Malkin6280 4 жыл бұрын

I like it! That's just about the right amount of drop for me, but I'm not into the crazy lowered look. Thanks for another great video how to!

@TWAMotorsports 4 жыл бұрын

Thank you Scott. This is a good option for a daily.

@edwinverdin5299 Жыл бұрын

We’re you stay at ??

@TWAMotorsports Жыл бұрын

Holiday in usually

@dflowfamily 3 жыл бұрын

It looks like a show truck and also the explanation you gave us is high quality step by step video. Thank you very much.

@TWAMotorsports 3 жыл бұрын

Thank you

@RicardoGarcia-kh4rz 2 жыл бұрын

I did this on my 13 Tahoe and love it. I used 2" spindles and 2" lowering strut in the front so now it rubs a little since it sits on 22s. I might just use the OEM spindles and keep the 2" lowering strut. Thanks for the content!!

@TWAMotorsports 2 жыл бұрын

Sounds nice.

@jcunn2d1 4 жыл бұрын

Great video! I've been having a tough time deciding which way to go with a suspension drop. I'm going to use this kit for my '14 Escalade ESV after watching your video. Thanks!

@TWAMotorsports 4 жыл бұрын

Thank you. Glad I could help

@rubensalais1502 4 жыл бұрын

Looks really good, I'm going to do my Yukon the same way, probably going to take me two days to do it but worth it, thanks for the video.

@TWAMotorsports 4 жыл бұрын

Thank you. It's not bad. Just take your time.

@user-pn9pw3rz2q 8 ай бұрын

Just got a 2013 yukon denali and i think a 2/3 looks good. Great work sir!!!!

@TWAMotorsports 8 ай бұрын

Thank you

@nunajobiz794 4 жыл бұрын

Parts new and clean. After a firery beard rub down. Instant man rust. I hope you charged them extra for beard rubbed parts.

@tomassotojr2882 Жыл бұрын

I like the way it looks and rides

@TWAMotorsports Жыл бұрын

Thanks you

@dlenderman11 3 жыл бұрын

Looks better than stock ride! You really are good at lowering a vehicle,if I lived nearby I would love to have you lower my suv!

@TWAMotorsports 3 жыл бұрын

Thank you

@dlenderman11 3 жыл бұрын

@@TWAMotorsports Look forward to more of your videos!

@joshludlum9344 4 жыл бұрын

Great video! Some of this stuff is trial and error. I found that out on my 3/5 drop on my GMC Sierra.

@TWAMotorsports 4 жыл бұрын

Thank you Josh. Sometimes it is.

@paulsalmon4771 4 жыл бұрын

Hey Travis, I think it amazing that you reply to everyone's comments. It speaks volumes about your personality. Anyway I have yet another question for you; I want to install LED lights under my running boards on my 20011 Yukon SLE and have them operat like entry courtesy lights but I'm having trouble finding which BCM connector wire to tap into. Any advice would be appreciated

@TWAMotorsports 4 жыл бұрын

Thank you. I try. If I had one I could help. Trace the puddle light from the mirror

@paulsalmon4771 4 жыл бұрын

@@TWAMotorsports Good advice ill try that . Thanks Travis much appreciated

@TWAMotorsports 4 жыл бұрын

@@paulsalmon4771 you're welcome

@joeandrade8082 4 жыл бұрын

Good Job! Love Watching Your Videos Keep up the Good Work..

@TWAMotorsports 4 жыл бұрын

Thank you Joe

@sonybravia74 4 жыл бұрын

Looks awesome. I have a set of adjustable struts and auto ride bypass. I’m not gonna put it on. I have the same exact truck.

@TWAMotorsports 4 жыл бұрын

Thank you. I will let him know.

@adrianacosta3623 4 жыл бұрын

Looking for some

@rosalioalvarado9143 4 жыл бұрын

Great job keep more vídeos coming

@TWAMotorsports 4 жыл бұрын

Thank you. I'm gonna try👍

@geneb.9619 2 жыл бұрын

Love it..cant wait to do it to my 2005 Tahoe 2 whl drive

@TWAMotorsports 2 жыл бұрын

Thank you. Different parts for that year. I made a video on that body style also

@Mobile.recording 2 жыл бұрын

After a long research about 2/3 drop: Beltech 753 kit rear springs are way too soft for long wheel base gmt900. Mcgaughy kit is firm but comfortable PPV/Avalanche springs super stiff - Good for towing or racing.

@TWAMotorsports 2 жыл бұрын

I generally use belltech tbss drop springs. I like a softer ride though

@Mobile.recording 2 жыл бұрын

@@TWAMotorsports after installing drop spring from bt rear feels like its living its own life so i assumed tbss made for lighter vehicle will be even worse and went with ppv springs instead because im towing

@TWAMotorsports 2 жыл бұрын

I drive my tbss springs everywhere. I also tow a vehicle. Never had issues. Most don't do all that is needed in the rear. Djm kit is required for relocation of components

@0557658583 4 жыл бұрын

ماشاء الله اتمنى اسوي سيارتي دينالي ٢٠٠٧ XL نفس كذا 😘 من المملكة العربية السعودية 🇸🇦

@jimmyrogers918 9 ай бұрын

I watched your video because I wanted to lower the back of my Denali because of the back just feeling too high constantly. I found from your video where someone had modified the autoride lever to raise the back of the vehicle with the air shocks. I'm going to try to fix this now that I know what was going on then re-evaluate lowering. I am a lowered vehicle fan and on the Denali it just feels like a vehicle that should be lowered being a street oriented AWD truck that comes with low profile tires.

@TWAMotorsports 9 ай бұрын

Adjusting that won't get you were you want to be

@jimmyrogers918 9 ай бұрын

@@TWAMotorsports currently my rear is 1 inch higher than factory and my front is still factory height. I'm normally a lowered vehicle person, so I may lower it, but I don't want to touch lowering it till I have the suspension operating correctly to have a good starting point. I'm going to come back to this video when I'm ready. Your video with your wife's tahoe was also helpful and I'm probably going back to that one as well.

@TWAMotorsports 9 ай бұрын

@jimmyrogers918 thank you and good luck

@jimmyrogers918 9 ай бұрын

@@TWAMotorsports To update, I fixed the arm and the Denali drives much better. It no longer feels like the back is going to come over the front. I'm going to drive it like this till I get the itch to lower.

@TWAMotorsports 9 ай бұрын

@jimmyrogers918 thats good

@joehalliday4989 4 жыл бұрын

Looks like you did a nice job there it looks real good it came out nice I'd leave it just like it is so auto track works

@TWAMotorsports 4 жыл бұрын

Thank you. My neighbor decided to leave it stock.

@juanmarquez1050 3 жыл бұрын

Never thought about but I have a 2011 Yukon Denali with 24 would look amazing lower my truck’ thanks for the idea’ I would start looking for the parts

@TWAMotorsports 3 жыл бұрын

It would for sure.

@paulsalmon4771 3 жыл бұрын

How would you describe the ride on 24's

@marksantana Жыл бұрын

Hey Travis I have 2010 Tahoe Ltz with air ride I wanna lower it but where do you find the adjustment sticks for the air ride

@TWAMotorsports Жыл бұрын

They generally come with kit used here or you can get 1/4" all thread at hardware store and make your own.

@daryldavis2812 3 жыл бұрын

Think it looks good that’s exact the way I want mine hell I wish you were in the Chicago south suburbs I’d definitely bring mine to you

@TWAMotorsports 3 жыл бұрын

Thank you

@paulsalmon4771 3 жыл бұрын

Hey Travis, I can't stop watching this video, Once again you've inspired me to take on a project. I didn't lower my truck but I did change my front struts from OEM to Monroe Roadmatic complete strut and it's was way easier that I thought it would be. Just wanted to say thanks again man. This is after the fact but what's your opinion of Monroe and what would you recommend as a quality rear shock replacement for the trucks other than Monroe ??? Stay blessed

@TWAMotorsports 3 жыл бұрын

Thank you. I have no real experience with monroe. Most of what I use is mcgaughys, belltech and viking

@gunandknifenut 4 жыл бұрын

Awesome video. Looks a lot better.

@TWAMotorsports 4 жыл бұрын

Thank you John.

@billwells673 4 жыл бұрын

Looks great I’ll be doing the same thing soon

@TWAMotorsports 4 жыл бұрын

Thank you

@amazigh1789 Жыл бұрын

bro it looks a bad ass I am doing the same thing to my Yukon ., Thank you

@TWAMotorsports Жыл бұрын

Glad you likes it.

@carlosvelez5876 4 жыл бұрын

Thank you video help me a lot

@TWAMotorsports 4 жыл бұрын

Thank you. Glad I could help

@kylemoran4699 4 жыл бұрын

It looks great. I've got a tahoe you can lower if you're looking for more things to do.

@TWAMotorsports 4 жыл бұрын

Thank you. Lol. You and have the world apparently.

@nicholasrussell3662 4 жыл бұрын

I just ordered Belltech 751 for our 2011 Denali w/ Autoride. It comes with front springs instead of spindles. I called Belltech customer support and they insist that I won't need threaded rods for the front AutoRide sensors, but that doesn't make sense because lower springs will change the upper control arm relative to the sensor. Does that sound right to you? I suppose I could make my own. Watching your video made me wish I had gone for the spindles for only $100 more. Great videos and extremely helpful. I appreciate what you're doing!

@TWAMotorsports 4 жыл бұрын

Yeah I'm not a fan of the spring drop

@omarzowila 4 жыл бұрын

The Yukon Denali looks good when it’s lowered

@TWAMotorsports 4 жыл бұрын

Thank you

@Mikelspower 4 жыл бұрын

Awesome , as always!

@TWAMotorsports 4 жыл бұрын

Thank you Mike

@joellomeli8569 2 жыл бұрын

Quedo bien con los spaser Con los originales parece q iva volar Chido tu vídeo de volada y sin ablar tanto

@martymar4328 2 жыл бұрын

Does bypassing the auto ride affect how the vehicle rides

@TWAMotorsports 2 жыл бұрын

Not really

@Titian92 4 жыл бұрын

Looks good.

@TWAMotorsports 4 жыл бұрын

Thank you

@alexayala3660 Жыл бұрын

I guess you answered my first question at the end of the video lol

@bigsex43 3 жыл бұрын

Also, well this ruined The original ride? Over here in New York City we get snow so I don’t know if that would mess up the ride as well. Hope you can answer this question I appreciate it. I love the way these trucks look 😎

@TWAMotorsports 3 жыл бұрын

Doesn't ruin the ride

@mvxyetti9262 Жыл бұрын

Damn you gonna make me piss off my chick and lower our yukon😂😂

@TWAMotorsports Жыл бұрын

She will love it.

@mr.dc4l 4 жыл бұрын

I raised the same Yukon in the back with a one inch coil spacer.. what length should my leveling sensor arm be?

@meezoomm Жыл бұрын

Hi, i did exactly what you explained with 3 inches at the back and 2 inches at the front Everything adjusted But I got ( service suspension system) The pump starts pressurizing frequently with a very short time not like before installing the kit And it looks like there is air leaking sound what should I do or fix it

@1BADSPEC 4 жыл бұрын

I had a quick question if you wanted to lower the front end couldn't you have mount the lower shock under the lower control arm to get 2 more inches?

@TWAMotorsports 4 жыл бұрын

I don't like that as an option but you could.

@JoseDiaz-bi6sm 4 жыл бұрын

I think it looks good now,my wife has a Denali

@TWAMotorsports 4 жыл бұрын

Thank you. Get yours dropped. 👍

@JoseDiaz-bi6sm 4 жыл бұрын

Ima think about it and if I do,I will do it with ur video..

@TWAMotorsports 4 жыл бұрын

@@JoseDiaz-bi6sm 👍

@hectormaupin13 Жыл бұрын

looks great and wish you would do my Yukon lol

@TWAMotorsports Жыл бұрын

Thank you. Wish I had time to

@BertoVilla-cy8cf Ай бұрын

I bought an already lowered 2010 Escalade but it’s very bouncy . Any input on what to do to help clear that

@TWAMotorsports Ай бұрын

No idea. Probably done with the cheapest parts available

@bigsex43 3 жыл бұрын

Here is my question to this , is it good to lower these SUVs the way you do living in New York City ? because, I noticed a lot of these videos with the low Tahoe’s are mostly in the south. If I were to do that to my Tahoe will it ruin my suspension and do any other damage to my truck? By the way, I love your videos😎🤟🏾💯

@TWAMotorsports 3 жыл бұрын

Thank you. Depends on roads I guess. No issues here

@a4edwin 3 жыл бұрын

I live in nyc have a 3-5 drop on my Tahoe for 10 yrs . I replaced lots of parts in the suspension but I don’t blame the streets more normal wear and tear

@2wdDenali 7 ай бұрын

Where did you get the autoride "end links"?? To retain the autoride but looks like a shorter "stick"?

@TWAMotorsports 7 ай бұрын

Comes with the kit I listed in video description

@saraemde8286 4 жыл бұрын

Good job I like

@TWAMotorsports 4 жыл бұрын

Thank you

@johnarnold231 2 жыл бұрын

Awesome video. Quick question though, did you have to change the front autoride height rods like you did the rear, and what measurement did you go by on the rear ones? Also did the rear ride height rods come with the belltech kit? Thank you

@TWAMotorsports 2 жыл бұрын

No on front as drop is in the spindle. It did come with rear rods.

@tinkv192 4 жыл бұрын

Have you had to mess with bearings removing spindles doing this project? Live in Northeast and think it would be easier getting new

@TWAMotorsports 4 жыл бұрын

I have replaced them.

@CPRDIYAuto 4 жыл бұрын

Good video I have the same Yukon

@TWAMotorsports 4 жыл бұрын

Thank you. Time to lower

@Mapp2004 4 жыл бұрын

I need this for my 07 Escalade

@TWAMotorsports 4 жыл бұрын

I agree it would look good on an Escalade

@_beardedbeanie_ 10 ай бұрын

Can you use these same style kits or do they offer one that you know of for an 05 denali with the factory rear air suspension with deleting the air ride?

@TWAMotorsports 10 ай бұрын

No. Different parts

@ramonramirez-ff3mm 3 жыл бұрын

Looks great.. quick question i want to do this to my 07 tahoe will everything i need for this drop be included in the kit or will i need extra parts? Thanks

@TWAMotorsports 3 жыл бұрын

I made a tahoe drop video also all parts are linked separately

@ricardodelaguila3587 Жыл бұрын

Looks great. My air suspension on my 2007 Denali took a dump and I was going to replace it with a passive regular suspension from Strutmasters. But then I got the idea to lower it if I’m going to pretty much replace the whole suspension. My question is could I do this and not have to worry about the air suspension?

@TWAMotorsports Жыл бұрын

Yes but will need bypass module to not get dash errors

@ricardodelaguila3587 Жыл бұрын

@@TWAMotorsports yeah I saw that SM had one in their kit that converts the whole thing for 750 but if you only want the module its 400! I also read on some threads that putting a resistor on each corner of the truck works as well to fool the computer. Do you think that’ll work?

@TWAMotorsports Жыл бұрын

Resistors won't override the compressor

@ricardodelaguila3587 Жыл бұрын

@@TWAMotorsports maybe removing the fuse would? Do you any other company that sells that module a bit cheaper?

@TWAMotorsports Жыл бұрын

@@ricardodelaguila3587 no cheaper option that I know of unfortunately

@Catholic1391 3 жыл бұрын

Ok all did is the 2 inch spindle drop, now it dragging making noise like the tire is skiding and bouncing in the front? The two front tire are facing outward. I did the alignment myself it's ok now just need to take it in for alignment. Also the bottom spindle ball joint would not go flush on the ball joint even if I put over 100 pounds on it?

@TWAMotorsports 3 жыл бұрын

Not exactly sure what went wrong without it being in front of me

@Catholic1391 3 жыл бұрын

@@TWAMotorsports It's ok now the bottom ball joints boots move down 😃

@tangomantactical Жыл бұрын

I have 08 Yukon Denali with 305/35 24" Seirra replicas. I want a 3/5 but everyone says it can't be done because of the air ride. Totally sucks because I like how it rides but I want it lowered. You definitely know what you are doing. I will admit I absolutely abhor the squat in the rear. 100% hard no. Here in Tennessee everyone lifts and has the front end pointing to the sky and the rear like there isn't any suspension at all. Complete hillbillies and rednecks. I want mine slammed and a slight 5/8" or so rake in the front. So a 3/5 drop is impossible? 100% lose my air ride? Thoughts?. Any information would be greatly appreciated. Love the Vette.

@TWAMotorsports Жыл бұрын

You will have to remove the air to get that low

@truefire04 4 жыл бұрын

thanks for the vid. and the part # will deff. come in handy when i go to lower my Tahoe. so is it not necessary to cut the rear bump stops if your only doin the 3"?

@TWAMotorsports 4 жыл бұрын

I dont cut them off if only going 3" in the rear.

@rayleemck 4 жыл бұрын

Would this work on an 07 2wd Avalanche? To replace the front struts, which you said you might do in the future to keep the forward rake look going, What struts would you recommend. Excellent work this convinced me I could do this

@TWAMotorsports 4 жыл бұрын

Yes. I would use belltech struts

@michaelweber8142 Жыл бұрын

My vehicle has factory 20” tires. How does that affect my use of the kit shown in the video? My vehicle is a 4x4.

@TWAMotorsports Жыл бұрын

Doesn't affect it at all

@a4edwin 3 жыл бұрын

What did you end up doing? Changed the front struts or left it the way it was?

@Superkid778 4 жыл бұрын

Looks good!

@TWAMotorsports 4 жыл бұрын

Thank you

@Superkid778 4 жыл бұрын

TWA Motorsports Great work and cool projects.. I lowered a 2000 Dakota and gave it to my daughter.. and next up is buying my little bro’s low mileage 2002 T/A

@TWAMotorsports 4 жыл бұрын

@@Superkid778 thank you. Lowered Dakotas are good looking and well if you have been here long you know how I feel about TAs lol

@Superkid778 4 жыл бұрын

TWA Motorsports heck yeah! I’m a F-body lover ever since I had my 86 IROC.. and T/As are pretty awesome!

@TWAMotorsports 4 жыл бұрын

@@Superkid778 I would love to do an iroc some day.

@christiantorres6476 4 жыл бұрын

I’m trying to do this to my 07 Escalade look good man! , just one question what did you do on min 5:30?🤔

@TWAMotorsports 4 жыл бұрын

Removed rod for autoride to install shorter one

@damiantellez21 3 жыл бұрын

@@TWAMotorsports where can I get that part 5:30 I’m lowering my 2010 Cadillac Escalade esv

@TWAMotorsports 3 жыл бұрын

Cames with the kit or get all thread from hardware store

@damiantellez21 3 жыл бұрын

@@TWAMotorsports thank you bro very good video

@TWAMotorsports 3 жыл бұрын

Thank you

@alexayala3660 Жыл бұрын

Would you recommend this kit 2/4 or a 3/5 for an AWD 2013 Cadillac Escalade ESV? I do pull a boat in the summertime

@TWAMotorsports Жыл бұрын

I jave pulled with it and helper bags

@marchaughton1730 Жыл бұрын

Hey hows it going. Quick question. Do the front ride height sensor links have to be adjusted as well? If so to what? 2011 Chevrolet suburban ltz autoride Thanks

@TWAMotorsports Жыл бұрын

Not with the kit installed here.

@cwbr34 3 жыл бұрын

Hey bud, loved the channel. Iam doing this same style drop but I don't have the bump stops or cups. I checked beltec but not sure which size stops you used? Any help would be great thanks. Chad B

@TWAMotorsports 3 жыл бұрын

They come with the kit generally. I generally use universal option with are listed in my suburban drop video

@arturohernandez7142 3 жыл бұрын

Do you use shock extenders on the BELLTECH shocks?

@TWAMotorsports 3 жыл бұрын

Yes

@angeltrabado9886 3 жыл бұрын

I have the 2-3 kid bowTech

@whereswaldosyt3871 Жыл бұрын

Is it safe to use the 3" or more drop spindle if I want to go lower in the future or why should I only use that one insted of the 2" ? I really want to buy a kit but would want to hold off on slamming it and don't want to spend dubble the money

@TWAMotorsports Жыл бұрын

Yes. It is fine

@Jazzvibe3071 4 жыл бұрын

Is everything you need in the kit you listed or do you need to add the other parts to the kit?

@TWAMotorsports 4 жыл бұрын

All the parts I used are listed

@tomgraham815 2 жыл бұрын

About a year and a half ago I die this lowering on my 2013 Denali. I have 4" in the back an the same in the front. It looks level. The ride has recently gotten really bad. I used the ebay device to eliminate the Air suspension. I kept the stock shocks on the front and changed the rear to Bell Tech. The question is can I put the stock shocks back on and hook up the air on the front and back?

@TWAMotorsports 2 жыл бұрын

I guess you could

@memoarellano5432 3 жыл бұрын

I have a question man..Ok so I just put 2 brand new shocks on my GMC Yukon SLT 09 and the rear shocks also so I just know its that the front of the truck is higher than the back.😏Can you tell me an idea why? ..??🤔..thanks!..great video by the way it looks good the Denali lowered

@TWAMotorsports 3 жыл бұрын

Maybe compressor for autoride is bad if equipped with air shocks

@memoarellano5432 3 жыл бұрын

@@TWAMotorsports ok well thanks for answering my question..now that would give me an Idea what cause the issue 😎👍🏼

@TWAMotorsports 3 жыл бұрын

Good luck on your search

@isaacmendoza2305 6 ай бұрын

Yo does anyone know if someones lowered a lexus gx460, getting one soon and I haven’t seen anyone lower them

@anthonyWilson514 4 жыл бұрын

I got a quick question if the truck is not equipped with autoride do you still need to install the rear shock extenders?

@TWAMotorsports 4 жыл бұрын

If using the factory shock you need them

@scottpearce8122 2 жыл бұрын

Hey Travis, I did the (2-3 with cups in rear) 753 kit on a 2013 but seems like the rear springs have a weird rebound over bumps (same with no bumpstops also). Do you think I'd like the Trailblazer spring and/or does that take me to 4" in the rear? I could possibly use the cups and Trailblazer springs to get me back to 3" maybe....

@TWAMotorsports 2 жыл бұрын

You could but that doesn't sound normal

@scottpearce8122 2 жыл бұрын

@@TWAMotorsports Thanks, I caught in another video you mentioned the Trailblazer spring may be a better ride. I'm going to try them before I take a grinder to the o.e.m's...LOL.

@TWAMotorsports 2 жыл бұрын

They do ride better

@scottpearce8122 2 жыл бұрын

@@TWAMotorsports Gotcha, I appreciate your help.👍

@TWAMotorsports 2 жыл бұрын

You're welcome

@adamalaniz 3 жыл бұрын

Quick question. I just clicked the link for the drop kit and it says it won’t fit my vehicle. But it’s the same one from the video. I have a 2012 Yukon Denali awd and it says it won’t work.

@TWAMotorsports 3 жыл бұрын

It says that because it is parts for different vehicle. It will work

@wconnett 2 жыл бұрын

I just ordered the Beltech 1019 kit for my 14 Denali XL. Do I need new rear sway bar links and relocation bracket?

@TWAMotorsports 2 жыл бұрын

I always use them

@jontaithompson8194 4 жыл бұрын

I have 11 Yukon Denali not AWD pulled the fuse for the auto ride in the back, keep from lifting, if I get that 2-3 drop do I have to plug the fuse back in, and adj auto ride

@TWAMotorsports 4 жыл бұрын

You can or leave it

@jime4657 3 жыл бұрын

I have a 2019 Cadillac Escalade 4WD that I would like to lower. My question is about the tire clearance. I have 22" wheels, and have only 3.3 inches clearance between the top of the tire and the inner wheel liner. Looks like the tires will be right against the linerif lowered 3". Is there something that has to be done to the inner liner?

@TWAMotorsports 3 жыл бұрын

May have to heat it and push it back some. I made a drop video on my 16 denali which would be a better reference. It's on the same channel

@erickshv001 Жыл бұрын

Hey man. Is that a 2/3 or 2/4 drop?

@TWAMotorsports Жыл бұрын

Either

@linneahannigan2187 Жыл бұрын

Do you have any video about replacing shocks on an already lowered truck (I have a 2003 Denali) - apparently there are issues with the stabilitrak system when monkeying around with the suspension/shocks/struts. Any advice or guidance is much appreciated.

@TWAMotorsports Жыл бұрын

I don't but the methods are the same as here

@linneahannigan2187 Жыл бұрын

@@TWAMotorsports Thank you for your reply !

@TWAMotorsports Жыл бұрын

You're welcome

@tyreemcgrone10 4 жыл бұрын

I love your videos! Please help me, I have an 09 Yukon, that was lowered before I bought it. It has street performance shocks and struts that need to be replaced. Are there any other options for struts that you could recommend? The truck has about a 5/7- 6/8 drop The best way I can put it is that the running boards are about even with the curb

@TWAMotorsports 4 жыл бұрын

That is crazy low. I generally use the belltech struts and shocks but yours may need to come up an inch or so.

@frankm8030 4 жыл бұрын

If I replace the shocks do I need the shock extenders if so why and no I don’t have auto ride

@TWAMotorsports 4 жыл бұрын

I think so because they are not in the proper geometry without

@frankm8030 4 жыл бұрын

TWA Motorsports ok thank you

@TWAMotorsports 4 жыл бұрын

@@frankm8030 you're welcome

@023338 4 жыл бұрын

When does the auto ride work? I just bought a 09 Yukon denali and I'm not sure if it airs up or when it does? My navigator aired up when the key was on the on position and lowered when you turn off the key. New to GM btw😅

@TWAMotorsports 4 жыл бұрын

It moves when it senses weight

@paulsalmon4771 3 жыл бұрын

Welcome to the GM club experience you are now home FORD NO MORE... BTW a road trip is when you'll really fall in love with it. Enjoy...

@brianmontgomery1290 3 жыл бұрын

I’m lowering 4in in the rear do I need to change the auto ride sensors length or can I leave those as is ? Also with 4in drop keeping my shocks the factory length with shock extensions to I need the travel mod ?

@TWAMotorsports 3 жыл бұрын

I would do the travel mod and get shock extensions. Rod needs shortened

@jasonherring 4 жыл бұрын

I am about to lower my envoy Denali

@TWAMotorsports 4 жыл бұрын

Different deal on that.

@angeltrabado9886 3 жыл бұрын

Hey how you doing I just want to ask you a question I got crypto night a arms would I be able to use those the lowering kit on my truck

@TWAMotorsports 3 жыл бұрын

No idea

@sacsicc916 Ай бұрын

No free travel mod on 4 inches or less ?

@TWAMotorsports Ай бұрын

4 or more

@TalsmaBRT Жыл бұрын

looks like you lost that 1/4" in the rear because you pulled the rubber spring spacer and didn't put it back on with the new 1" spacers. 14:55 mark

@TWAMotorsports Жыл бұрын

Did that on purpose

@TalsmaBRT Жыл бұрын

@@TWAMotorsports then why did you wonder why it only lowered it 3/4" instead of 1"? 16:12

@TWAMotorsports Жыл бұрын

It generally does without

@ObsGoofin96 3 жыл бұрын

Did that kit come with front uca bushings? I got the same kit and mine came with them just wondering if i need to bother with those

@TWAMotorsports 3 жыл бұрын

No it didn't

@tinkv192 4 жыл бұрын

Also what do you need to do to get into the strut and bypass the auto ride?

@TWAMotorsports 4 жыл бұрын

Bypass are on Amazon

@edwinsievers3052 4 жыл бұрын

For the life of me, I cannot find a source for a bypass kit for my '15 Denali. (Up thru '14....no problem.) Do you (or any readers) have a source? Honestly, not lowering......it's just that my OEM (front) shocks leak at 67K and the dealer sez $2K for replacement; so I'm thinkin' Bilsteins or other good "regular/non-magnetic" shocks. Thanks in advance. Ed S in Denver

@TWAMotorsports 4 жыл бұрын

I have not used them on the newest body style. There is a company that makes a $400 one that is supposed to delete it. Not sure of the name though.

@marcwidener6799 3 жыл бұрын

I'm guessing there is no difference between this and the XL? wife has 22" with 305/40 on it. Looking for this. Why wouldn't 2" springs in front work instead of spindles? Or would it? Had a 4/6 on my 2000 silverado and went back with a 2/4. Looks just as good but functions as a truck again. Just looking to save a little money.

@marcwidener6799 3 жыл бұрын

Great video by the way.

@TWAMotorsports 3 жыл бұрын

Springs will not work well with autoride shocks. No difference in XL model.

@TWAMotorsports 3 жыл бұрын

Thank you

@marcwidener6799 3 жыл бұрын

Thanks!

@Mobile.recording 2 жыл бұрын

Springs seem soft to me

@Thelongesteconoline Жыл бұрын

I’ve always thought Chevy’s and GM’s have to go up or down to look great. Never thought anyone would go down with 4wd though. Seems like a sin, but to each his or her own.

@TWAMotorsports Жыл бұрын

Yeah when you don't offroad, why not

@fcm2790 4 жыл бұрын

I lowered my 04 denali / rides horrible / has front spindels / rear springs belltech all around with belltech shocks.. do I have to cut the front jounce stops?

@TWAMotorsports 4 жыл бұрын

yes they need trimmed a little.