How To Lubricate Your Jack "H" Series Industrial Sewing Machine

Рет қаралды 9,704

Oz Commercial Sewing Machines

2 жыл бұрын

This video goes into the detail of manually lubricating your walking foot industrial sewing machine.

Пікірлер: 42

@zenithstolemysoul 2 ай бұрын

Great video. I have this machine and no idea that any of this was necessary.

@ozcommercialsewingmachines 2 ай бұрын

Glad it was helpful!

@pablonorte77 2 жыл бұрын

Thank you very much from Russia! You are the best!!! Few people show information for this car

@ozcommercialsewingmachines 2 жыл бұрын

Thank you

@azsamsasho Жыл бұрын

I have removed all of the oil wicks from the top part where the needle bar is and put grease. Made my machine much cleaner, no contamination of my sewing area or work anymore. Working on slow speed makes the oil pump obsolete

@ozcommercialsewingmachines Жыл бұрын

Thanks for sharing

@sharonlomas3720 Жыл бұрын

Thank you for this video, I’m in NSW and purchased from my local dealer. He didn’t tell me any of the information you show in your videos, thank you so much.

@ozcommercialsewingmachines Жыл бұрын

Glad I could help. Who is your local dealer please?

@sharonlomas3720 Жыл бұрын

@@ozcommercialsewingmachines sewing machine warehouse in Penrith.

@sallyrycroft4874 2 жыл бұрын

Thanks for this, I wasn't aware you had to do any manual oiling.

@ozcommercialsewingmachines 2 жыл бұрын

Glad we could be of help to you :)

@lw8476 2 жыл бұрын

Thanks Peter, you must be a mind reader, I was going to request this video. I have the h2-cz, fantastic machine, terrible instruction manual.

@ozcommercialsewingmachines 2 жыл бұрын

Glad that we could be of help, enjoy your lovely machine.

@janerodgers4830 Жыл бұрын

Thank you for this. Very useful.

@ozcommercialsewingmachines Жыл бұрын

You're very welcome!

@farhadfadayi7389 Жыл бұрын

great video. thanks

@ozcommercialsewingmachines Жыл бұрын

You are welcome!

@joshuajames9224 2 жыл бұрын

Great, ordered a long spout lubricator.

@ozcommercialsewingmachines 2 жыл бұрын

Thanks for watching Joshua, we hope you like and learn from our videos.

@craftycaz 15 күн бұрын

I've just acquired a used H5 and this video along with the others you have are very useful. The fold out booklet that cam with it isn't much use to explain the functions etc, so I'm wondering if you know where I could get a manual for it. Looking online hasn't yielded much success so far. Thank you

@ozcommercialsewingmachines 8 күн бұрын

The only manual for these machines is the little fold out page it came with, there is no manual as such like you get with a domestic machine. This is because they are usually in a manufacturing environment with trained users and technicians on site to rectify any issues. This is why we have done the videos we have.

@craftycaz 7 күн бұрын

@@ozcommercialsewingmachines Thank you, I've managed to source some extra information and I do have the leaflet that originally cam with it. Your videos have been a godsend so thank you so much for doing them. all the best

@lucindagilmour8591 2 жыл бұрын

Thanks Peter, appreciate the video. I was told when I purchased by my H5, that I only needed to put oil in the sump once a month and other than that I didn’t need to do any other oiling. How often should I be doing what you just demonstrated?

@ozcommercialsewingmachines 2 жыл бұрын

Hi Lucinda, thanks for watching. I would suggest doing this every 3 - 6 months depending on how much usage the machine is getting.

@valerierosel2399 Жыл бұрын

Thanks for the video. You blocked a few places to oil, but very helpful anyway.

@ozcommercialsewingmachines Жыл бұрын

Thank you :) It was a difficult video to do because of all the little tight places I had to get to .

@lizfuller755 Жыл бұрын

Great video, Is there a way of reducing the amount of oil on the wicks at the back of machine near the raise footer bar - oil is dripping onto the flat bed!

@ozcommercialsewingmachines Жыл бұрын

Hi Liz. Not really, they tend to settle down after a while from new, but if they are causing issues for a prolonged period, you can dab them with a cloth periodically, if it becomes excessive you can cut the cable ties and trim back the wicks, this part of the machine requires minimal lubrication, so if you decide to shorten the wicks, be aware you will need to manual oil these areas when necessary. Hope this helps.

@sharonlomas3720 Жыл бұрын

I’m having the same issues.

@Manutrail Жыл бұрын

Thanks for this vidéo, can you explain how you change the thread cutter on a 2060 G please ? ,

@ozcommercialsewingmachines Жыл бұрын

No sorry, you will need to take it to your local technician for that.

@user-ek5ix7mi6w Ай бұрын

Is it possible to lubricate machine components with paste-like lubricant?

@ozcommercialsewingmachines Ай бұрын

No, only sewing machine oil. Grease gets put in one place at the back of the machine where instructed.

@xolilemabuza4840 Жыл бұрын

Hi Peter, I also have a Jack H2 machine and I am having trouble with it. My stitches don't come out right, the stitche from the bobbin thread is loose or doesn't show at all on the bag. Could you please help?

@ozcommercialsewingmachines Жыл бұрын

Are you able to send through a photo to the email address so we can see what is going on please?