Lovely looking bin store. One point for anyone wanting to make their own, you should always brace your doors back to the hinge side to stop them dropping.

Great job 👍🏻 - if you have problems with animals (flies, maggots or orther little creatures): close the lid of the containers, add a chain to the lid of your bin-store and use a hook to attach the lid to the chain. So you can open the bin with lifting the lid. (Hope I wrote it in an understandable way - as I am German 🫣

Looks spot on !

Great work, thanks for sharing 👍

Mark this great! I’m in sunny Wimborne and trying this at the weekend (weather dependent). You’ve got my sub.

Nice looking bin store Mark, well done.

very nice job man. Congrats

Beautiful 👍🏻 building one for brother next week. Will definitely use your video as a guide. Fantastic 👌🏻

In the process of building my own at the moment. Just to make the doors and the lids, been great to use your video as a bit of inspiration. Look forward to more videos like this😁

very clever dude! 👍👍👍👍👍👍👍 Helped me with my idea 😁👍 cheers.

Nice build Mark 👍 Regards JP

Fantastic design 💪💪 and build , spot on mate, cheers Rob

Nice job Mark 👍

Thanks Mark for a great video! I am hoping to make one here back in the States! If you can ever put together an instructional video with a part list on line, I would be happy to purchase them from you

Wow spot on that

Nice job. So much cheaper than buying one. New sub.

Having split with my ex, I'm learning how to do things for myself. Thankyou for this brilliant video as I now have a guide on how to build my own stores.

This is genius

11:39 if you pop a rope on the lid and the support you lift up, it will automatically lift it up and you just hold if while dropping door back down. Or cut the support in half and put a hinge in to attach the 2 pieces. On the lid move the baton up to give the support place to be attach with a bolt at the lid and on the side of the bottom, then when you lift the lid the support will automatically open up and lock in place, when you close you hold the lid and push on the support. Or easiest is go buy outdoor struts and attach that to the lids of the top. Great job! I will be sharing a link to your video and point them to your channel.

Great job Mark. Will be putting one together this weekend I hope. Jusy to double check - What wood size wood did you use for the frame? 2x2? Cheers.

Great job Mark 👍

Greatwork!! ball park figure of cost of materials Mark?

j'envisage le même projet, je vais m'inspirer de votre vidéo, c'est vraiment très bien (désolé, je ne parle pas anglais)

I was looking for an idea on how to build my own rubbish bin with wheels so I can store scrap metal in it, and when it's full, I can wheel it to my truck so it'll be easier to load... Though this video didn't cover what I needed, i got an idea on how to build the frame. I'm a noob in woodworking by the way. I guess I'll be using free pallets for my trial effort. Wish me luck and thanks for the excellent video

I saw you using the DeWalt battery powered saw, but most of the time back to your hand saw! Paul Sellers would be proud of you. Is the feather edge wood treated as well? It looks like it is. Great job using the power saw to rip thin boards. They stays are a great idea. Very nicely done.

I'd deem it very helpful if you could tell me what the height of the rear and front uprights were to get the same slope as you. I was very impressed by your finished article and have just had a load of timber delivered ready to emulate your design. I'm doing a three door jobbie with 60cm doors.

Great vid thanks. Just one thing..i think you need to invest in a chop saw.

Hi Mark- what's the music? Cheers from the states.

I'm pretty sure the props you added to hold the bin store roof flaps up must have prevented the lids of the bins from opening. I think you then covered that error by folding th bin lids right back and behind the bin as the tops appear to be permanently open at the end of the video. Could I be wrong?

Crazy we all need a space big enough for a car to get our bins in . Quality job . ❤ how much was cost ?

Very nice job, I'm about to do the same. BTW I think the bracing on two of the doors are the wrong way round, the rt. hand dble. and the far right. 👍 😎

I really like this and would love to make it, but from what I can gather this would cost £350-£400 in materials and you can buy one for around £500. I'd really enjoy the experience of making it myself but the cost saving is pretty small, especially bearing in mind my finish is likely to be worse than a purchased unit.

How did you get the top roof doors to stay in place, not drop down? Also for the roof to be at an angle did you have to cut the timber at an angle or did you cut it straight? I have been given a load of pallets so I plan to make a bin store (I have no diy skills) but your video is the best I have found online so far.

Fantastic job but please correct the bracing on door n2 and 4 if you haven't already. Overall very good looking job

Roughly how much did this cost to make? Great video thanks.

Have you got a cut list for the material used? It's a great design and I'd love to replicate it

Did you get the feather boards from Jewson? The longest boards they have are 1.8m

Nice job Mark and I like the way you laugh a lot😊. I’ve been thinking of doing something to hide our WBs as they’re in the front garden. Your video may well prompt me to get going. BTW have you permanently removed the lids from the wheelie bins? 12:06 & 12:20 . Would be a bit dodgy around here with all the wind we get at the roadside. Keep up the good fun work.

Would love all the measurements and material list please 🙏🏽

Hello Small Workshop Adventures - are there plans available for this project and any of your others? Thanks

How did you do the angles? That would have been helpful to see...

Both right hand doors are wrong and May drop. Left hand doors are great. Also to save materials the back could have been left in clad but I suppose it can be moved to another location if required

Thank you gonna try myself bins are absolutely a eye sore

What did u use mate 2x2 for the frame ?

I don't see any ventilation. Now that you have been using this bin store for a while, do you miss having some holes or slots to cut down on bad smellies?

Can I ask what rear to front angle you used please?

How does one remove any heavy bins I.e.green bins if they are put in backwards ? Am I overthinking?

Why dont you run the slop going towards the back, so you dont get wet going out in the rain?

Does the arm that holds up the top block the lid to the bin from opening?

open bins without a lid will attract mice

How much did the wood cost for the job?

Can I ask what the cost of the materials were?

How much I can charge to a costumer for build the same thing

Do you have instructions?

Looks good but you got your T&G the wrong way around, The fatter edge (6.20 mins) should be on the outside.

Another video showing how to do things the hardest way you can think of

Have you moved house?

You’ve fitted Shiplap boards wrong way round!! Thin side should be covered so thick side shows!!

Having built one of these "Bespoke Bin Stores" I can see why people think that Mark has taken off the bin lids. In fact he's just folded them overdo that they hang behind the bins. Mark's problem is that his props to hold the bin store lid up stick out and stop the bin lids being opened. As an alternative I've screwed one end of a piece of batten to the underneath of the front of the lid and at the other end I've cut a V shaped notch to hold the batten against the front edge of the bin store and hence the hold the lid clear.

What wood was it u used to build the frame again. Cheers in advance