How to Make a Carbon Fiber Panel- Wet Lay Technique

Рет қаралды 153,014

3 жыл бұрын

Scissors: amzn.to/3o3veHe
Roller Cutter: amzn.to/3o8KemZ
Cutting mat: amzn.to/3vYsu0m
Foam Brush: amzn.to/3vX0kTv
Chip Brush: amzn.to/33yTOpY
Mixing cup: amzn.to/3beDbEc
Mold Release Wax: amzn.to/3vVYWQZ
Mold Release PVA: amzn.to/3ffF7h8
Other sources for materials I have used:
UScomposites.com
Sollercomposites.com
Fibreglast.com
compositeenvisions.com
Part 2, vacuum bagging: • How to Vacuum Bag Carb...
Part 3, Infusion: • Carbon Fiber Infusion-...
Part 4, Trimming: Coming soon!
To purchase parts or contact us: ajhartmanaero.com/
Facebook: / ajhartmanaero
Instagram: @ajhartmanaero
Recorded on GoPro 7 Black: amzn.to/2YW7B5N
Edited with Pinnacle Studio: amzn.to/30NWm11

Пікірлер: 148

@iceyinferno 2 жыл бұрын

Great video! Just a tip I've seen elsewhere for those cheap bristle brushes, if you super glue the bristles by the metal part you won't have any strands fall out anymore. Hope it helps!

@TheDarvec1

I need a low seat back for my wheelchair...I am so going to have a go at this. The bought ones are £600! Awesome.

@jfratis9081 2 жыл бұрын

If you arent getting a good carbon-to-epoxy ratio doing wet layup then you simply need practice. Too many people use vacuum bagging as a crutch to being crappy at laminating. A good way to practice is laminate with fiberglass cloth. You will be better able to see sections that are too heavy or too light and with time develop a feel for it. When done right it should have a very consistent canvas like look.

@simonac688. Жыл бұрын

Thank you for the demonstration its clear and easy...no crazy music is also appreciated 😅

@user-fs8ck6wq8x

Only missing the thikness of the end product .

@dredre9484 14 сағат бұрын

Mad vid but can't you just use glass

@craigsmith3655 3 жыл бұрын

Good Job AJ. Straight forward, no BS, no over the top technical tems, calm and well presented. Couldn't have done any better myself.

@comptegoogle511 Жыл бұрын

No pressure is required for the penny roller.

@davidspin5353 Жыл бұрын

Wow way over a welders pay grade, I'll just buy parts of the internet... Good video.

@samcarrs Жыл бұрын

A close up would have been interesting

@martinwaples7330 Жыл бұрын

Bro, YOU ROCK, THANK YOU FOR BEING A FELLOW FABRICATOR. I FABRICATE MOTORCYCLE RACE FAIRING KITS. I CAN ALWAYS COME BACK TONYOUR SITE AND GET SOME TIPS AND IDEAS.