Рет қаралды 19,482
Watch the short version here • How to Make a CNC Floo...
Today I’m going to make a CNC floor inlay using the Stepcraft M.1000 CNC machine vacuum rails and Amana Tool® CNC router bits. www.toolstoday.com
I love how this project turned out, what do you think? Aluminum inlay into a walnut floor. Did you know the Fein Turbo II X vacuum allows the machine to suction to the floor? This allows me to carve directly into the floor!
Feed & Speed Cutting Parameters
Amana Tool 51402-Z SC Spiral O Single Flute, Aluminum Cutting 1/4 D x 5/8 CH x 1/4 SHK x 2 Inch Long Up-Cut ZrN Coated Router Bit with Mirror Finish
www.toolstoday.com/v-14286-51...
RPM: 18,000
Feed Rate: 70ipm
Plunge Rate: 50ipm
Smooth ramp in: 0.750"
Depth per pass: 0.063"
Amana Tool 51454-Z, SC Spiral O Single Flute, ZrN Coated Aluminum Cutting 1/8 D x 1/2 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit with Mirror Finish
www.toolstoday.com/v-15191-51...
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Smooth ramp in: 0.750"
Depth per pass: 0.040"
Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
www.toolstoday.com/v-13779-46...
RPM: 18,000
Feed Rate: 120ipm
Plunge Rate: 60ipm
Depth per pass: 0.125"
Amana Tool 46200-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/8 Dia x 1/2 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit
www.toolstoday.com/v-13777-46...
RPM: 18,000
Feed Rate: 60ipm
Plunge Rate: 30ipm
Depth per pass: 0.125"
- - - - - - -
** Subscribe - / toolstoday
** Shop the website - www.toolstoday.com
** Like at Facebook - tinyurl.com/toolstoday-facebook
** Follow on Instagram - / toolstoday
** Follow on Twitter - / toolstoday
- - - - - - -
Links
Amana Tool® www.amanatool.com
Fein Turbo II X vacuum www.toolstoday.com/v-17397-92...
STEPCRAFT M.1000 36 x 48 CNC Machine www.toolstoday.com/stepcraft-...
STEPCRAFT Vacuum Rails M.1000 www.toolstoday.com/v-15002-12...
STEPCRAFT Lubrication System (for Q.Series and M.Series) www.toolstoday.com/v-17240-11...