You can find the template for this chair here: www.builddadbuild.com/plans
@BuildDadBuild4 жыл бұрын
Cheers!
@sheepdog8194 жыл бұрын
Kicking some tail there Nick! I hope to help out a bit more once I get back to work. ~The Greek~
@BuildDadBuild4 жыл бұрын
@@sheepdog819 Thanks, brother.
@JD-jc2is3 жыл бұрын
Dude, we need to incorporate a drink/beer holder!
@BuildDadBuild3 жыл бұрын
@@JD-jc2is Silly dude...you don't set your drink down!
@WickedMakers4 жыл бұрын
When that music came on at 3:00 we were like, Thor's Hammer! Fitting choice. 🤘💀 They've got some pretty decent tunes in there. My man, that carving just takes this thing over the top. Seriously awesome. A chair fit for a Thane, for sure.
@BuildDadBuild4 жыл бұрын
LOL! I recently discovered that their music has gotten a lot better! So I've been digging using it. And thanks guys! It means a lot from you. Cheers!
@IngeniousOutdoors3 жыл бұрын
Its the "reliving the glory days of high school football" energy and HydraulicPressChannel music for me.
@BuildDadBuild3 жыл бұрын
🤣🤣🤣 Cheers
@dbiernackijr14034 жыл бұрын
Nick I had the same issue with my jigsaw.... I went to a shorter blade and it worked better. I think the long ones tend to have more flex and don't take much pressure for them to go offline.... Keep up the good work and don't change your approach... Cool...... KEWLLLLL
@BuildDadBuild4 жыл бұрын
Thanks for the tip! Cheers!
@leroyyancer39304 жыл бұрын
Love it, but I have 2 criticisms. 1. When making a Viking chair one must jam to viking rock such as Amon Amarth or Tyr. 2. When sitting in said Viking chair, one must drink mead instead of whiskey! Awesome chair. Im definitely building it.
@BuildDadBuild4 жыл бұрын
LOL I would have totally done that if I knew those bands! And I tried to order a drinking horn....but Corona decided it wouldn't receive it until half way through June. Cheers!
@mikewood95143 жыл бұрын
Hahahaha.amon amarth are great.
@MakerCuisine4 жыл бұрын
Hey nick great build, honestly when I made mine I wish I had left the back longer so I think it was a good choice, and the carving was amazing, love the Celtic knot and the cross you did, the holes in the tongue piece was a good touch to keep the weight down 🤘 rock on brother
@BuildDadBuild4 жыл бұрын
Thanks, brother! Cheers
@onealflynn24143 жыл бұрын
I wish I left back on mine 4ft too. I made mine out of 2x10. I should have gotten the 2x12
@lorenzolanzianoerasmo65463 жыл бұрын
Yeah some carving would be great!👍😉
@BuildDadBuild3 жыл бұрын
Roger that! Stay tuned.
@LWillmann4 жыл бұрын
I bet a Punisher inspired chair like that would be cool!
Nice work Nick the stank cranked it to 11!!! Yes bog is slang for toilet I always call TP bog roll. I find the jigsaw will start cutting poorly if I apply to much forward pressure (trying to cut quicker)
@BuildDadBuild4 жыл бұрын
Thanks, James! Cheers!
@lloydkeller18093 жыл бұрын
Love it. You could carve a Dragon head on the back.
@BuildDadBuild3 жыл бұрын
I like it!
@jackstrubbe76084 жыл бұрын
LOVE this variation! We made simpler ones when I was a kid. This is da bomb.
@BuildDadBuild4 жыл бұрын
Thanks, Jack! Cheers!!
@davidboese51592 жыл бұрын
We have a lot of saw mills in our immediate area, so I have a ready access of live edge slab wood available for very little cost. The slabs work wonderful for these Stargazers! Cherry looks really nice with oil on it!
@BuildDadBuild2 жыл бұрын
Sounds awesome! Cheers
@sheepdog8194 жыл бұрын
Hey brother, sweet chair!! Definitely not something you can throw on your pack but, I'd rock the hell out of that at the kids games! Keep up the content👊
@BuildDadBuild4 жыл бұрын
Thanks, brother! Yeah...it's not the lightest thing. But good for campfires and kids games! Cheers!!
@natilovesnails8813 жыл бұрын
Coolest thing I’ve ever seen. My husband needs one!
@BuildDadBuild3 жыл бұрын
Thank you! And I think everyone needs one! Cheers
@BearMaked4 жыл бұрын
Excellent chair, sir! I like the celtic design you put on there.
@BuildDadBuild4 жыл бұрын
Thanks, bud!
@ferrumcampitor75554 жыл бұрын
Love it! Might have to make a couple of these for Renfest next year. Would love to break those out next to the fire at the campground and drink some mead from my Auroch horn stein.
@BuildDadBuild4 жыл бұрын
That sounds awesome! Cheers!!
@MegaTeddybear044 жыл бұрын
I've been making them for years! People just love them.
@BuildDadBuild4 жыл бұрын
Cheers, brother!!
@travisdoesfirewood4 жыл бұрын
@Mesecher David, how/where do you sell them? Curious.
@MegaTeddybear044 жыл бұрын
@@travisdoesfirewood just word of mouth and I like making things for fun.
@christaylor16334 жыл бұрын
Chairs looks fantastic Nick !!!!!
@BuildDadBuild4 жыл бұрын
Thanks, Chris! Cheers!!
@paulbateman57694 жыл бұрын
I was one of the 20 or 30 that requested this build , just saying. As usual you didnt let me down Nick its awesome and the one I will build. Thanks for posting the plans. Oh and yes, us "Europeans" , well us English do call the crapper the bog, amongst other things :) As Uhtred Ragnasson would say "Destiny is all"
@BuildDadBuild4 жыл бұрын
Thanks, brother! Cheers to the Bog!
@Phoenix-wl5or4 жыл бұрын
That is a really good carve job. Especially with the router, I can’t free hand a router for my life.
@BuildDadBuild4 жыл бұрын
Thank you, very much. Cheers!
@bjornironside67074 жыл бұрын
ITS ABOUT TIME
@BuildDadBuild4 жыл бұрын
Ha! I knew you'd say that! I've been wanting to make it...I just wanted to wait until closer to summer time. Cheers!!
@johnnovosel24173 жыл бұрын
Great build, I don’t think I can do better, but I can dream!
@BuildDadBuild3 жыл бұрын
You can do better! Cheers
@lloydkeller18093 жыл бұрын
To cut the Chair base use a Kreg mini track portable, cut to the cross line then finish with the jigsaw.
@BuildDadBuild3 жыл бұрын
👍
@lynjermey64233 жыл бұрын
Love this, inspires me to give it a go. Loved the carving especially.
@BuildDadBuild3 жыл бұрын
Awesome! Thanks Lynn Cheers
@JOATology4 жыл бұрын
Hey buddy, I just stumbled across this video in my feed and you're my new favorite super hero. Love your channel brother! Looking forward to going through your other videos now. I really like how you took a really simple build and put a very detailed spin on it that turned out extremely well put together project. The power carver and router work are really nice and I hope you continue to grow in that aspect. That is something that I also want to try out. Thank you for the inspiration.
@BuildDadBuild4 жыл бұрын
Awesome! Thank you! Cheers!
@Stetson172 жыл бұрын
My wife loves this. she wants the top to be a Celtic heart.
@BuildDadBuild2 жыл бұрын
I like it! Cheers and happy carving
@veltreeproducts46454 жыл бұрын
Your such a corn ball nick! I love it!! Always making me smile! Great work buddy!
@BuildDadBuild4 жыл бұрын
Thanks, brother! Cheers!!
@jackwriter19084 жыл бұрын
It looks awesome... And that build is something everyone can do, so there are no excuses... F*ck now I have to build it...
@BuildDadBuild4 жыл бұрын
Thanks, Jack! No excuses.... Cheers!
@OperationLife3 жыл бұрын
Badass project!! You just keep building awesomeness!💯👍🍻
@BuildDadBuild3 жыл бұрын
Will do, brother. Cheers
@joshuagrafton87814 жыл бұрын
Super cool brother. I love it. You did an amazing job.
@BuildDadBuild4 жыл бұрын
Thanks, Joshua! Cheers, brother!!!
@truegrainwoodcrafts4 жыл бұрын
I've never used that specific fish before but for lots of other spray finishes, you can use steel wool to smooth out the texture. if you do that and add another coat after, it should be smooth. Steel wool also helps to hide an uneven coat. Most of my experience like that is from using a spray lacquer so not sure if its any different with what you used. Just a thought. Great videos man! Cheers!
@BuildDadBuild4 жыл бұрын
Thank you! And thanks for the tip. Cheers!
@Schedule1ne3152 жыл бұрын
I’m currently building a stone pavers fire pit and will be building chairs with this as inspiration. Also, I’m thinking of carving a serpent out of a 4x4 and attaching to the rest support
@BuildDadBuild2 жыл бұрын
That sounds wicked! Cheers
@lowcarbRD3 жыл бұрын
epic carving!
@BuildDadBuild3 жыл бұрын
Thanks, brother! Cheers
@serenaleaghgrace50234 жыл бұрын
love love love gunna make one, for my son yeah
@BuildDadBuild4 жыл бұрын
Nice! Let me know how it turns out! Cheers!!
@onealflynn24144 жыл бұрын
Yeah I made one too. People said it would take and hour to make. More like 2.5 hours lol. I have an old rasp and file. My jigsaw blade were crappie Walmart ones. Going try Milwaukee ones next.
@BuildDadBuild4 жыл бұрын
Those old tools will get you every time! LOL Cheers!!
@abaronsnumismatics4 жыл бұрын
good job
@BuildDadBuild4 жыл бұрын
Thank you! Cheers!!
@ericesquivel57994 жыл бұрын
Hmm try setting your jigsaw to 0 or 1 and use a speed square but good job
@BuildDadBuild4 жыл бұрын
Thanks, Eric! So slowing it down gets it cutting straighter? I had it turned up because I was cutting such thick material. Good to know! Cheers!!
@Earthshipowner3 жыл бұрын
For the blade issue... use the thickest one you can get your hands on...
@BuildDadBuild3 жыл бұрын
Good to know. Thanks for the tip Cheers!
@skidvanvoorden62814 жыл бұрын
The straight cutting with the jigsaw, it’s a combination of crappy jigsaw and blade. But brand blades will already solve a lot of it. But further, great job as always!
@BuildDadBuild4 жыл бұрын
Thanks, brother! And noted! Cheers!
@chuckchuckedwood28114 жыл бұрын
Shou sugi ban playhouse or play set would be cool and family functional
@BuildDadBuild4 жыл бұрын
Hey Chuck! Not a bad idea right there! Cheers!!
@webcrawler33324 жыл бұрын
New miter saw huh? 👍👍
@BuildDadBuild4 жыл бұрын
Yup! I got tired of not being able to cut anything wider than 6"! Cheers!!
@webcrawler33324 жыл бұрын
Build Dad Build Oyeah! Definitely
@shopcatt6434 жыл бұрын
Turn out awesome dude! You should start burning more stuff!
@BuildDadBuild4 жыл бұрын
More than I do now? LOL Cheers!
@DavidSchuVideo4 жыл бұрын
This came out awesome man!
@BuildDadBuild4 жыл бұрын
Thanks, David! Cheers!
@Devin2924 жыл бұрын
I've been hoping to make one forever. If you were a beer drinker it looks like you drilled can holders on the bottom board. Cheers
@BuildDadBuild4 жыл бұрын
Now you've gotta build one! Cheers!
@woodbeez60464 жыл бұрын
You could always criticize your own work. But all and all, that's bad ass...that'll be on my project list. 😎👍...gonna have to subscribe now. 😆
@BuildDadBuild4 жыл бұрын
Thanks! And thanks for the sub! Cheers!!
@RJamesBaphomet19883 жыл бұрын
Just watched this one for the first time.....dude....that's fuckin awesome 🤘🤘🤘🤘🤘🔥🔥🔥🔥🔥🔥🥳
@BuildDadBuild3 жыл бұрын
I need to make more and fire out how to make them lighter. Cheers
@lostsoulpb2424 жыл бұрын
Yes bog is slang for crapper i.e. "I gotta go to the bog". Make a punisher skull styled chair that would be awsome.
@BuildDadBuild4 жыл бұрын
Thanks for the clarification! Punisher chair....in some shape or fashion will be a future project. Cheers!
@holyfunions4 жыл бұрын
Time for a new blade on the jigsaw maybe? I change mine out pretty often (Black and Decker saw) and I think that’s why I don’t have the issue.
@BuildDadBuild4 жыл бұрын
Could be... Cheers
@secular1st3 жыл бұрын
yes, bog is a slang word for the 'crapper'. Love the vids btw
@BuildDadBuild3 жыл бұрын
Thanks, brother! Cheers
@tripinapod66974 жыл бұрын
Hey mate, I have the same issue cutting with a jigsaw 😁 love the videos. Your dog looks a Kelpie😁
@BuildDadBuild4 жыл бұрын
Thanks! You might want to check out these blades. I haven't used them, but saw a review on them for cutting straight lines... amzn.to/2M53OOR She is a Rottweiler mix. But, I see the resemblance. Cheers!
@kennethsarita2 жыл бұрын
super cool! but when I think that I need to make 15pcs of this I keep holding off starting haha
@patriot116rrus3 жыл бұрын
Отличный Трон 👍
@BuildDadBuild3 жыл бұрын
Спасибо!
@CodyMacRae14 жыл бұрын
Good job bud! I think I’m gonna attempt something similar. Also sick Jeep 😉 lol I have a 2015 Wrangler Unlimited Willys too except mines in Anvil Grey. Got a soft top for the summer and hard too for the cold winters when it drops to -40C here
@BuildDadBuild4 жыл бұрын
Thank you! And -40C? NOPE! LOL I have the top dropped on her most of the time. One of the perks of working from home! Cheers!
@CodyMacRae14 жыл бұрын
Build Dad Build 😂 yup one of the joys of living in Northern British Columbia. Warmest it’s got tin the last few summers is average like +29C and winters easily go down to -40C then gotta add a wind chill to that too
@dougdombroski94974 жыл бұрын
Badass
@BuildDadBuild4 жыл бұрын
Thanks, Doug! Cheers!!
@donpayne5624 жыл бұрын
If you figure the jigsaw out let me know, I have a makita and a bosh and on 1.5 material they both do it. Not so much on .75 stock
@BuildDadBuild4 жыл бұрын
Ha! Will do!! Cheers!!
@yu-ger-bloob-highway35214 жыл бұрын
What kind of heathen would downvote this? That’s badass! Probably the coolest channel I’m subscribed to. Glad I found you man, keep up the good work 💪
@BuildDadBuild4 жыл бұрын
Thank you! Sooooo...I have a troll that follows me and downvotes everything I put up. LOL Usually within the first hour of it going up. I guess some folks have nothing better to do. I'm glad you dig the channel. Cheers!
@pathann4195 Жыл бұрын
Only need 1"x12"x8' keeps weight down
@lloydkeller18093 жыл бұрын
I have a Dewalt nice jig saw and it cuts like that sometimes I get in a hurry
@BuildDadBuild3 жыл бұрын
LOL I feel you! Cheers
@lancerudy99343 жыл бұрын
Yes
@BuildDadBuild3 жыл бұрын
👍
@rickoncordova14 жыл бұрын
I like it a lot. Question... what is the story behind the special shout out to Stephen Mann every vid? Just curious. Thanks. Rick.
@BuildDadBuild4 жыл бұрын
Stephen Mann is a top tier patron...he is also my father in law. LOL Cheers!
@michaellionart48414 жыл бұрын
Build Dad Build 😂
@rickoncordova14 жыл бұрын
@@BuildDadBuild AAhhhh. ok. Thank you. Rick.
@jamesbarlowjr.37624 жыл бұрын
Awesome Chair Nick. I just got 2- 2x12x8. But I like a tall back (little less then straight up and down) and a wide seat so what would you think would be a good measurement? Thanks Bud!
@BuildDadBuild4 жыл бұрын
You'd probably be best off cutting your back and then playing with different lengths with a scrap 2X4 But, the longer you leave the "leg" of the chair, the more straight up and down it will be. And the closer to the ground would get you more back space and would be more straight up and down. Cheers!
@jamesbarlowjr.37624 жыл бұрын
Build Dad Build Thanks Bud. I’ll Give That A ShotI Appreciate You. Nice Job On All The Work You Do. 🍻
@DIY-design4 жыл бұрын
Dobra robota, podoba mi sie🙂
@BuildDadBuild4 жыл бұрын
Dziękuję Ci👍
@DIY-design4 жыл бұрын
Też po mału zaczynam swoją przygodę z Youtub, masz dla mn9e jakieś porady🙂
@DIY-design4 жыл бұрын
Jakieś wskazówki?
@Mnkyc_3112 жыл бұрын
My jigsaw cuts always come out at an angle and not straight too.. I think I just stuck at jigsaws
@joemcsherry25304 жыл бұрын
Hi nick.... love your videos.. I’m building an outside table out of white wood... burning it of course. My question is ...what do you recommend for the finish? I have also made a burnt and dyed indoor shelves, which I just sprayed with lacquer. Looks great at the moment, but should I be using a more durable finish coat? Thanks man
@BuildDadBuild4 жыл бұрын
I'm a huge fan of Halcyon Clear Rugged Varnish by Total Boat! If you've never used TB before I can also get you 15% off your first purchase. Use Code: builddadb at checkout totalboat.refr.cc/nickv1
@Gorack884 жыл бұрын
I have a plank in my workshop that I’ve been looking at for about a year now I know what to do with it.
@BuildDadBuild4 жыл бұрын
Awesome! Let me know how it turns out. Cheers!
@tmn674 жыл бұрын
Love it !!
@BuildDadBuild4 жыл бұрын
Thanks, Tom! Cheers!
@Djanck000 Жыл бұрын
1:30 The FUNNIEST part is that this is an African chair.
@ncboyd4 жыл бұрын
Looks great. How much would everyone in the group sell something like this for?
@BuildDadBuild4 жыл бұрын
Not carved? probably about $40 - $50. You could batch quite a few out in a day. Especially if you created some templates. I'd be charging closer to $150 - 200 for a carved chair. Cheers!
@ncboyd4 жыл бұрын
Thanks a lot. Im in the planning phase of turning my garage into a full blown wood shop. Hoping to eventually go full time.
@waycool19694 жыл бұрын
Man! Nice!
@BuildDadBuild4 жыл бұрын
Thanks, brother! Cheers!
@waycool19694 жыл бұрын
@@BuildDadBuild cuool!
@lancerudy99343 жыл бұрын
Do you have a vice to hold the would down?
@BuildDadBuild3 жыл бұрын
I use a jaw horse like this one: amzn.to/38OEkll Cheers!
@bobfulton60903 жыл бұрын
How does it feel against your back
@BuildDadBuild3 жыл бұрын
Far more comfortable than you would think! Cheers
@travisdoesfirewood4 жыл бұрын
What bit are you using in your router when you carved out the design, kind Sir?
@BuildDadBuild4 жыл бұрын
Hey Travis! It's a Spiral Upcut Bit like this one: amzn.to/3d96FSK Cheers!!
@larryschmitt25134 жыл бұрын
What did you use in your router for carving? Chair looks Great btw 👍🏻🍻
@BuildDadBuild4 жыл бұрын
Thanks, Larry! I used a spiral upcut bit like this one: amzn.to/3d96FSK Cheers!
@baldtiger19704 жыл бұрын
Where do you get your stencils?
@BuildDadBuild4 жыл бұрын
I usually find something online, then take it into Adobe Illustrator and get it how I want it to look. Cheers!
@rayflynn82644 жыл бұрын
Awesome chair!! Is the dog a vikings.
@BuildDadBuild4 жыл бұрын
Thanks, Ray! If you mean is the dog super awesome? Then yes! Cheers!
@simk333 жыл бұрын
Hey again :D Where can I find template for the back? Awesome chair! Cheers
@BuildDadBuild3 жыл бұрын
Hey Alex! I just pulled up some pictures of Celtic knots and then kind of made it my own. Cheers
@naimnaim56914 жыл бұрын
Bon boulot
@BuildDadBuild4 жыл бұрын
Thank you!
@johng08074 жыл бұрын
Great job on the chair! How about an Adirondack chair?
@BuildDadBuild4 жыл бұрын
Thank you. And that's not a bad idea! Cheers!
@sonofliberty023 жыл бұрын
Great work, but these chairs are actually reenactorisms and they never existed in Scandinavia during the Viking Age. They originated in Africa.
@BuildDadBuild3 жыл бұрын
Interesting to know. Cheers
@kielquigley80152 жыл бұрын
Carve some tiki faces!!
@BuildDadBuild2 жыл бұрын
I like it! Cheers
@charrua10294 жыл бұрын
How thick is the boards you are using. By the way nice chair.
@BuildDadBuild4 жыл бұрын
Thank you. That was made from a 8' 2X12
@charrua10294 жыл бұрын
Thanks
@BuildDadBuild4 жыл бұрын
@@charrua1029 Sure thing!
@MarbleFoxGamer2 жыл бұрын
Bro the plans section won't work for me. Someone send me the measurements please
@BuildDadBuild2 жыл бұрын
Try here: www.builddadbuild.com/plans
@MarbleFoxGamer2 жыл бұрын
@@BuildDadBuild I love how I say the website won't work for me, so you send me a link to the website... You listen about as much as a 12 year old lol
@BadgerBoy20064 жыл бұрын
You should try making a template for the slot. Cut most of wood out with the Jigsaw and then use a flush trim bit on the router to finish it.
@BuildDadBuild4 жыл бұрын
Not a bad idea! Thanks for the tip! Cheers!!
@dustinchambers41724 жыл бұрын
Do a Friday the 13th style one man
@BuildDadBuild4 жыл бұрын
I like it! Cheers!
@kennethmichael27944 жыл бұрын
how about a throne next?
@BuildDadBuild4 жыл бұрын
Hmmmm... The Iron Throne made out of burnt wood? Cheers!
@EthanCarterDesigns4 жыл бұрын
When are you going to accept the fact that his name is Ethan Carter?! Awesome project and video as always bud!
@BuildDadBuild4 жыл бұрын
Ha Ha! Thanks bud. Cheers!
@it_only_counts_on_fly34733 жыл бұрын
Do you go fishing? Do you have time to go fishing??? It's a great opportunity to drink more whiskey. You know the collapsible chairs you get, the good ones with a back and bag attached? They cost a feckin fortune for all they are, could you make 1? Burnt and coloured of course
@BuildDadBuild3 жыл бұрын
I haven't been fishing in decades....but I'd go for the whiskey! LOL I think you could modify this chair to fit your needs! Cheers
@cookingwithwil1willow9463 ай бұрын
That chair wasn't created during the viking age it's originally African in design. A bog is a marsh. Still great video though
@michaellionart48414 жыл бұрын
It’s perfect because it’s not perfect 👍. And yes why is it when we do/make stuff 1st thing we do is point out “mistakes” ? Weird huh
@BuildDadBuild4 жыл бұрын
Yeah. I do it with everything I make. And most of the time no one would even notice! Cheers!!