How To Make A Viking Chair || Camping Chair

Рет қаралды 6,663

3 ай бұрын

Find plans here: cedarriverwood.etsy.com
Facebook : / cedarriverwoodworking
Instagram : / cedarriverwoodworking
Drill and Driver : amzn.to/49FGDmz
Dwalt Jigsaw : amzn.to/3JlPqiY
2x12 : www.lowes.com/pd/Severe-Weath...
Clamp on straight edge : amzn.to/3vVE7uK
12" Square : amzn.to/3vWcZfb
Irwin Clamps : amzn.to/3UhFbCx

Пікірлер: 84

@chifferrobe1910 2 ай бұрын

Making one !!!! Thanks! Stargazer

@cedarriverwoodworking 2 ай бұрын

Good luck with your build. You'll have to let me know how it turns out.

@Cvoge1972 3 ай бұрын

The dimensional lumber (where 2" = 1/12") comes from the idea of rough sawn versus surfaced lumber. The idea is if you take an 8/4 rough sawn board and mill it down, the end result will be 1 1/2 inches. Reality is you can squeeze out more than that, but that is the concept.

@cedarriverwoodworking 3 ай бұрын

I appreciate the explanation.

@karlriley1314 Ай бұрын

If you would shorten the supports to hold the set in for storage and cut a hand hold into the back rest, you could have a handle to carry it.

@cedarriverwoodworking Ай бұрын

I like the ideas on the modifications.

@Bearded-Viking-WoodWorks 3 ай бұрын

You’re correct , they are not Viking , lol , 😂 love it though brother. I’d love to have one ! Might just have to make one ! Love that the seat storage is in this one !

@cedarriverwoodworking 3 ай бұрын

I would love to see a bearded viking take on it! I suppose we can call it a viking chair at that point.

@Bearded-Viking-WoodWorks 3 ай бұрын

@@cedarriverwoodworking lol 😂 indeed brother . Great job on it man , I really like that design , it’d be great around the fire pit for sure. 👍

@paulbateman5769 3 ай бұрын

Oops the bearded viking is here. Don't tell him I've been watching another channel 😉 ha Skäl brother

@WedoweeHandyman 3 ай бұрын

Daniel I Just dropped a video that has an adaptation that allows for adjustable back angles For star gazing If you make the Bearded Viking Chair you should add that option in. Great video Thanks Cedar!! @@cedarriverwoodworking Daniel I

@p.musolf8310 5 күн бұрын

To make the chair even in a more upright position screw a blok of wood with a hinge at the end of the board. Fold it in/under to get a more upright position. Since it can fold out as well it will allow you to slide the board in and out.

@cedarriverwoodworking 5 күн бұрын

That's a decent idea, but if you get to far forward you will tip over.

@p.musolf8310 5 күн бұрын

@@cedarriverwoodworking I have never experienced that. Use the same thickness as the rest of the chair. It will only raise the chair 2 inches on the back. Just enough to have a more upright position.

@billlawrence9594 3 ай бұрын

I logged on after a long day to innocently watch Andy work his wood, next thing I know he’s mutilating a dead tree carcass. SICK!!!! Joking aside, really cool build

@cedarriverwoodworking 3 ай бұрын

I'll try to massage my wood next time! I appreciate the support.

@paulbateman5769 3 ай бұрын

Soccer? Thats football right? ⚽️🏴󠁧󠁢󠁥󠁮󠁧󠁿😁😁 great build. Definitely the storage makes it stick out from the rest ✌️👍

@cedarriverwoodworking 3 ай бұрын

Ope sorry is my American showing again? HAHA. I'm glad you enjoyed the video.

@KJC63 Ай бұрын

great instruction

@cedarriverwoodworking Ай бұрын

Thank you.

@Ron-0417 3 ай бұрын

That 2x12 was ruff cut at 2x12, and by the time it was dried, planed and the edges straightened, 1 3/4" x 11 1/2" is all that was left. I do have a 12" speed square and a bunch of the 6" ones, which I use way more often.

@cedarriverwoodworking 3 ай бұрын

Thanks for the explanation. I use smaller squares a lot more also.

@paulpittman9895 2 ай бұрын

I like that you go into extreme detail on your builds. I have PTSD and it affects how I understand things. Great work. I'm a subscriber.

@cedarriverwoodworking 2 ай бұрын

I'm glad that it helps and I really appreciate the support.

@remmingtonsteele2562 3 ай бұрын

I enjoy both sizes of speed squares. I really liked your solution to bundling the pieces together. Thanks !

@cedarriverwoodworking 3 ай бұрын

Thank you. I really appreciate the support.

@glennmiller9487 3 ай бұрын

Both.. Cool Design

@cedarriverwoodworking 3 ай бұрын

Thanks! I really appreciate the support.

@mikedesbois1968 3 ай бұрын

Very well explained. Love the storage idea. Just wondering what type of wood you used.

@cedarriverwoodworking 3 ай бұрын

I appreciate that. This is made out of a southern yellow pine 2x12

@WedoweeHandyman 3 ай бұрын

I Like the idea you incorporated to keep it all together I am gonna incorporate something similar on my next Chair Build. I just finished a live edge oak version came out pretty good

@cedarriverwoodworking 3 ай бұрын

These would look great as live edge. I'm lad you enjoyed the video.

@tonyturnswood 3 ай бұрын

I love the vertical alignment better.. thanks for a simple fun project!

@cedarriverwoodworking 3 ай бұрын

Glad you like it! I appreciate the support.

@larrystone5749 3 ай бұрын

Good job and project thx for sharing enjoyed it Keep building

@cedarriverwoodworking 3 ай бұрын

I really appreciate the support.

@gregoryramos9601 Ай бұрын

You should have made a chair with the shorter support board so we can see the difference in how they differ in sitting position.

@cedarriverwoodworking Ай бұрын

I will try yo keep that in mind next time I make something like this.

@jerrybyrd7778 3 ай бұрын

I really liked the storage solution.

@cedarriverwoodworking 3 ай бұрын

I'm glad you like it. I appreciate the support.

@TX-biker 3 ай бұрын

Good project 🤠 Gonna build one

@cedarriverwoodworking 3 ай бұрын

Thank you. You'll have to let me know how the build turns out.

@SawdustCreationsbyMike 3 ай бұрын

Probably a little more leaned back. I would use it by the campfire. I like the way you made it fit together to carry. That’s pretty awesome.

@cedarriverwoodworking 3 ай бұрын

I appreciate the support.

@mrmyblessednest1722 3 ай бұрын

I love it! I emailed you a couple pictures of the one I made awhile back

@cedarriverwoodworking 3 ай бұрын

I got them. It looks great!

@mrmyblessednest1722 3 ай бұрын

@@cedarriverwoodworking thank you!!!

@bethfarmer4142 3 ай бұрын

I bought a chair in Zimbabwe that’s essentially the same, except it’s decorated with carvings.

@cedarriverwoodworking 3 ай бұрын

They look great with carvings.

@markbrackett2518 3 ай бұрын

Both.

@cedarriverwoodworking 3 ай бұрын

They do both have their places. Thank you for the support.

@davidduffin2176 3 ай бұрын

I only have one so off to the store I go to get the other

@cedarriverwoodworking 3 ай бұрын

Sounds like you are making more than 1. Always a good time to share with someone.

@TX-biker 3 ай бұрын

6” speed square Only for storage ability

@cedarriverwoodworking 3 ай бұрын

I can respect that.

@Griffinwoodworks 3 ай бұрын

I really need a 12” speed square but make do with a 6”. But my most used square is the 4 1/2”.

@cedarriverwoodworking 3 ай бұрын

I have a a delve square and I love that thing.

@Griffinwoodworks 3 ай бұрын

@@cedarriverwoodworking if I were to ever spend the money for a woodpeckers product, it’s be that small delve square. I use my little one for squaring blades and fences, so I can actually justify it lol.

@cedarriverwoodworking 3 ай бұрын

@@Griffinwoodworks I won it in a raffle, so fortunately I didn't spend a ton on it, they do make some very accurate tools.

@bobbybuildsit 3 ай бұрын

I've tried the speed square trick to try and help with the jigsaw. Blasted thing really pushes to the left. When I tried clamping the square the saw just jumped over. I do happen to have the cheapest saw I could find in a store, do you think that is the main culprit?

@cedarriverwoodworking 3 ай бұрын

It could be. If the blade isn't aligned to the edge it could be a problem. Maybe the blade support isn't good either.

@rickmauro7803 3 ай бұрын

It was a 2x12vbefore it was milled down to a 1 1/2 x 11 1/4

@cedarriverwoodworking 3 ай бұрын

I appreciate the explanation.

@chuckwoods0411 3 ай бұрын

The wood is 2x4 before drying

@chuckwoods0411 3 ай бұрын

Or 2x12…

@cedarriverwoodworking 3 ай бұрын

That's a lot of shrinkage

@HanktheTank349 3 ай бұрын

I prefer to have both size squares available to me. Never know!!

@cedarriverwoodworking 3 ай бұрын

I have seen them that way too and it's a great option.

@davepillow8478 3 ай бұрын

12” speed square every time. Love this chair. Thanks again 👍

@trob1850 3 ай бұрын

both

@cedarriverwoodworking 3 ай бұрын

They do both have their place. I appreciate the support.

@johna7704 3 ай бұрын

Nice work very simple but I noticed you have an industrial size bag of viagara against the wall. LOL just messing with you😂

@cedarriverwoodworking 3 ай бұрын

What can I say? I gotta keep up with my fiancé!

@johna7704 3 ай бұрын

@@cedarriverwoodworking the way that green bag is folded it looks like it says viagara

@timlist4173 3 ай бұрын

Why 2x material?

@cedarriverwoodworking 3 ай бұрын

It's easy to source and this is meant as a beginner's channel.

@chrismosca2588 3 ай бұрын

That's a good idea I would put a piece of nylon strap to the back so you could carry it better or side of it 😊

@cedarriverwoodworking 3 ай бұрын

I like that. I have two built and was thinking about leather handles after I stained them.

@larrystone5749 3 ай бұрын

I’m more of a Scenic Mountain View Person lol

@cedarriverwoodworking 3 ай бұрын

I would love to sit out and admire nature in one of these chairs.

@chrisc3170 3 ай бұрын

I like the lean but my wife is a more straight up person.

@cedarriverwoodworking 3 ай бұрын

Sounds like you may need to make one of each!

@oflores7457 3 ай бұрын

12 inch bigger is better 😂

@cedarriverwoodworking 3 ай бұрын

My wife always tells me "inches matter".