I dont mean to be so offtopic but does anyone know a trick to get back into an Instagram account? I stupidly lost my password. I would appreciate any tips you can give me

@Edwin Daxton instablaster :)

@Jerry Kayson thanks so much for your reply. I got to the site thru google and I'm trying it out now. Looks like it's gonna take quite some time so I will reply here later when my account password hopefully is recovered.

@Jerry Kayson It worked and I actually got access to my account again. I'm so happy! Thank you so much, you saved my account :D

@Edwin Daxton happy to help xD

Thank you!🤙

Thank you! I appreciate it!!

Fishing Fools thank you! I appreciate that!

clear pipe ust as cheap? 👀I dont see them in the stores

That’s a good idea!

Yes sir. Thanks for checking it out

Yes sir! Definitely a must have when going after big pompano!

Thanks dude!

Awesome!

Awesome!! Super easy and worth every penny

Thanks!! Hope you get the chance to do some saltwater fishing soon!

I think you have to use a larger outer PVC if you use that…been a while…28 years to be exact

Awesome! Glad it helped!

Thanks!

Thanks for checking it out!🤙

@@BeardedBrad92 would this work if you replaced the plastic pipe with stainless steel, only asking as where i live we pump for lugworm.

I’m sure it would work just as good

Thanks Brad

@@pompeyo7, - Alvey Reels, Australia, make bait suction pumps with s.s. pipes. Alvey fishing reels etc are imported into USA, - maybe their s.s. pumps too. I have two of them. These pumps need a handle fitted in, just under the top cap! It makes it So Much Easier to pump with! 🦐 I am in SA. 🇿🇦

Haha thanks dude!! I appreciate it!

Salty McCrory thanks man! You got a shout out coming in the next one! Stay tuned!!🤣🤣

Let’s fish Saturday.

Or just do it right and use a hole saw and run it in reverse......HF has a hole saw kit for $18. There is a cheaper $13 kit but it goes from 1" to 1-1/4" as the $18 goes from 1" to 1-1/8" which would work better for 3/4" PVC where the cheaper kit would work better for 1" PVC.They also have brad point bit set for $6... If one can't afford those then one can't afford to fish... Also when gluing PVC one has to use the PVC cleaner or acetone (same but cheaper by volume) 1st then apply the glue.Just using glue and no cleaner will ensure the joint will come apart at some point,sometimes sooner than later. Also to reduce the size of the one side of the test cap just put your bolt through the cap,screw on your wingnut and chuck it into the drill you have to make the holes.Then just run it over sandpaper,concrete,asphalt,or anything of the like that is rough.This will make it near perfectly round.

You got it!

Maddog Fishing thanks man!

Mullis's Outside Again thanks dude! 🤙🤙

They’re over that way, best to go out at low tide

They will be in the same plumbing section. They will be with the fittings. Sometimes it’s tough to find everything because there’s so many different sizes and whatnot, so you could always just show the guy the list and they could get everything pretty quick for you!

Come back to visit and we’ll get ya one!

Bearded Brad I come every year! Our friend owns that condo so it makes it hard to go anywhere else! Lol

Pure Living For Outdoors that’s awesome! Well see ya next year then!

Bearded Brad to be honest I’m hoping this fall 😂😂😂

Well be here! Bull red fishing is on fire in the fall!

I didn’t compare prices, but they’re going to be pretty much the same on most these items.

Bearded Brad Okay thank you!

Thanks!

You can use smaller PVC. You just put a reducer on the end, that would probably still work

Lowe’s

The 3/4 is interior dimensions. Exterior is 1"

I’ve seen some like that. Definitely a good idea!

@@BeardedBrad92, - In SA, 🇿🇦, we have plastic bait suction pumps, that we also refer to as prawn pumps, with handles on. I have two Australian Alvey, steel pumps, are made with handles on. Alvey reels etc are imported into USA. They are much more advanced with handles on them! 🦐

Also, on all of my pumps, I put a level end, pipe end cap, onto my washer system, facing down! I made a hole close to the level end, to get split pin thru the metal rod, as threads on my pump's rod are worn down! Or put washer in place, turn nut onto rod! This hollow shape increases suction power!...🦐🦐🦐 On my plastic pumps, I file a slight curve edge, from outside of bottom of plastic pipe, and on the shaft edge, below washers, sloping inwards, this makes it a little easier to push pump into sand or mud! !🎣_🦐-🦐-🦐-🦐_🎣!

You have to start and stop 100 times to get it just right!

I got everything from Lowe’s

Bidenomics !! TRUMP 24 !!

@@tommyluke6407Corporate greed is more of the problem though

At lowe’s in Alabama you can get all parts for under $20. This assumes you already have drill bits glue lying around. But just the parts in the pump all together are under $20

@@BeardedBrad92 Ok consider throwing Alabama in the title. lol