How to Make a Leather Minimalist Wallet | One Piece Wallet (Free Pattern)

No video

How to Make a Leather Minimalist Wallet | One Piece Wallet (Free Pattern)

Рет қаралды 48,780

Күн бұрын

In this tutorial, I show you how to make a quality one piece minimalist leather wallet, using tools you already have, without any leatherworking experience needed.
Link to FREE pattern: jameskgraves.c...
Where I get all my music (30-day free trial): share.epidemic...
Want to make your own? Here's what you will need (at least 12x10" required):
Crazy horse leather: amzn.to/3vGfoFj
Crazy horse leather (alternative): amzn.to/3wPxXHg
Tools I use in my leather projects (updated to what I use NOW):
L'indispensable knife: amzn.to/3ca7Umw
Edge beveller 0.6mm: amzn.to/3iim4G5
Tokenole edge burnisher: amzn.to/3ixY0yS
Low cost Japanese skiving knife: amzn.to/3fG8hHw
Awesome rotary cutter: amzn.to/3uLcQEw
Cutting mat: amzn.to/34HhoBu
Edge paint marker: amzn.to/2S8uNj8
Hole punch set: amzn.to/3yZjHhh
Stitching punches: amzn.to/3iimOel
Steel ruler: amzn.to/3icJcph
Wing Dividers: amzn.to/3w4XgVU
This handmade leather wallet tutorial shows you how to make your very own slim minimalist leather wallet using a single piece of leather, and some basic tools you should already have at home. Included is a free leather pattern, so you can instantly get started with your minimalist leather wallet making.
Gear I use in my videos:
My main camera: amzn.to/3p87rX4
Favourite (go-to) lens: amzn.to/2RRVE37
Primary microphone: amzn.to/34IU06p
Second camera: amzn.to/2SQGUBK
Lens I use for close-ups: amzn.to/3fCEsHR
My photo camera: amzn.to/2S0LNIe
Studio lens: amzn.to/2SO6jvO
Main (awesome, budget friendly) light: amzn.to/3wLvb60
My primary tripod: amzn.to/3wMIDX7
THE vlogging tripod: amzn.to/3yRhZyd
For anything that might be stolen: amzn.to/3c9ZU4S
My Socials:
Instagram: / james.k.graves
Twitter: / jameskgraves
TikTok: / james.k.graves

Пікірлер: 85

@JamesKGraves 3 жыл бұрын

Who's going to try making one of these? 😏

@dimasarayan2327 3 жыл бұрын

Hey man how can we avail that??that's awesome man!

@jeremjerem787 2 жыл бұрын

I've just done one! Man, it is great! Not only fonctional but also realy good looking! Thanks a lot for sharing this template !

@brianlatchford9702 2 жыл бұрын

I would if I knew how to download plan I'm new to computers and leather work

@saldomino1639 2 жыл бұрын

Awesome Video James ! Thanks for the Pattern took me about 35 mini minutes to make !

@leather_brother_52 Жыл бұрын

God bless you for your generosity and kindness!

@swell9178 3 жыл бұрын

Awesome! I've been looking for an entry level project in leather craft. I'll give this one a go for sure.

@JamesKGraves 3 жыл бұрын

That's amazing! This is a great place to start; I'd love to hear how it goes! 👌

@adrianagordon5304 4 ай бұрын

Super excited to try this!

@thejohnsons7088 Жыл бұрын

Love this idea! Gonna print the pattern and try it!

@firtle83 Жыл бұрын

Think I will try this as my first leather project! Then will try stitching later ha

@ofeliarangel117 Жыл бұрын

Thank you very mych for the free pattern! 🎉🎉🎉

@OnderKiremitci 3 жыл бұрын

love that I will give a try ASAP maybe at Christmas holiday :)

@JamesKGraves 3 жыл бұрын

Great to hear, I'd love to see how it turns out!

@thegodfarter420 Жыл бұрын

Hey man, nice wallet design! I downloaded it, but the measurements where off by a few mm and the hight was off by 1 cm. Luckily you put the measurements on it so I just had to draw it myself. The wallet is nice, but I was annoyed that the inner flap would come loose so I stitched (while the flap was in) it together. It was a bit of a hassle to get in there with needles, but I got the job done and it will never come loose. I like it a lot better now!

@JamesKGraves Жыл бұрын

Hey, thank you! Unfortunately that can happen depending on the default print settings; when you print, if you hit ‘Custom Scale’ then type 100%, it should print correctly 😊 that’s awesome, glad it works for you! I have had to do the same thing once - I do find that sometimes the more supple leathers don’t hold so well so need a bit of stitching to keep them in check!

@theorphanizer7419 2 жыл бұрын

An amazing work of art, it looks amazing and fits into any pocket as i made it myself. At the 90 degree angles, you can punch a small hole each, if you have the tool, to prevent it from getting tiny rips, just as a suggestion 😉

@JamesKGraves 2 жыл бұрын

Thank you! Thats awesome! That's a great idea, I'll have to try it in future projects!

@thegodfarter420 Жыл бұрын

I thought of that aswell when I started the project!

@sarmadkhan8254 Жыл бұрын

Amazing! Thank you

@user-zx2nu4jr8x 6 ай бұрын

Love it.

@boxtv4027 3 жыл бұрын

Thanks for this! 😀

@JamesKGraves 3 жыл бұрын

No worries, hope you found it helpful!

@theogetics 2 жыл бұрын

Your channel is awesome. Definitely deserves a lot more subs. Keep at it.

@JamesKGraves 2 жыл бұрын

Thank you so much, Brian! Really great to hear you're enjoying the channel 😊 Thanks for being here!

@wanderingsouls5076 2 жыл бұрын

Hey mate!! I just wanna THANK YOU ❤️❤️!! For such a detailed explanation and for the materials and designs, thanks alot , 💞💞💟lots of love from PAKISTAN🇵🇰

@JamesKGraves 2 жыл бұрын

Hey man, no worries! Thanks so much for saying so, it means a lot to me that you enjoyed it 😊

@sahinmuzaffer 2 жыл бұрын

best work, following

@JamesKGraves 2 жыл бұрын

Thank you! Glad to have you on board!

@danielirvine7468 3 жыл бұрын

Awesome man great work and thanks for the pattern When you do the water on the edges you only need to do a tiny bit think that’s where you may be going off Yes the beeswax by itself on the slicker will work but I just rub the wax on the edges of the leather then slick

@JamesKGraves 3 жыл бұрын

Thank you, Daniel! Glad you enjoyed it 😀 I really appreciate the tips! I think you might be right! Thankfully I've learnt a lot since I made this video, the least of which is just to use Tokonole to make life easy for myself 😅

@youssefsabrysedky2429 2 жыл бұрын

Awesome ⭐

@JamesKGraves 2 жыл бұрын

Thanks, Youssef!

@user-rl7oi9ml1n 2 жыл бұрын

Как говорится... Всё гениальное- ПРОСТО! Классный кошелёчек!

@JamesKGraves 2 жыл бұрын

Большое спасибо!

@guydavis6918 3 жыл бұрын

Sick dude

@JamesKGraves 3 жыл бұрын

Thanks, man!

@tiagopardete545 3 жыл бұрын

You can use the bee's wax directly on the edge of the leather and then use the slicker to burnish it. The wax is an approved technique, it's not very seen because wax takes more effort to burnish because it takes longer to heat up.

@JamesKGraves 3 жыл бұрын

That's great to know, thanks buddy! I just knew it was working for me lol. Welcome to the channel!

@opticalpower 3 жыл бұрын

keep going my friend , you doing great 👑🌱 kader : Artist & Video Creator 🎥 (Las Vegas) ☀️🌱

@JamesKGraves 3 жыл бұрын

Thank you buddy!

@opticalpower 3 жыл бұрын

James Graves You very welcome my Friend 💫 keep going !! ✨✨ If You have a moment pls stop by to my youtube channel let me know what do you think 💭 I would love to have your advice Thanks ! kader 🎥

@NotUndertaleAaron 3 жыл бұрын

Could you please make a vertical version of this for a video or at least a template? So as to give the ability of being able to hold cash. I would really like to make one myself 👍

@JamesKGraves 3 жыл бұрын

Hi there, I will be setting up a website with all my patterns in the coming weeks, and I'll try to find some time to create a vertical version for you!

@NotUndertaleAaron 3 жыл бұрын

@@JamesKGraves again, thank you for doing this!

@adelabasnikova9385 3 жыл бұрын

Hi! Thanks for this awesome tutorial. Can you please tell me which size of edge beveler do you use? Thank you!

@JamesKGraves 3 жыл бұрын

Hi Adéla! No worries, thanks for saying so and glad you enjoyed it! I was using a 0.8mm in this tutorial, but I actually switched to a higher quality 0.6mm since then which I like much better. I personally find that a finer size gives a cleaner finish on small items like this, but its up to personal preference! 😊 hope that helps!

@mateenatlas 3 жыл бұрын

Wow, looks great. You should make an etsy account 😄

@JamesKGraves 3 жыл бұрын

Thank you! Haha I'm thinking about it 🤣

@lvkcocinasimple1616 9 ай бұрын

Hello James, first and foremost, thank you very much for sharing the template. How thick is the leather that you are using in this wallet. Thank you and Good Bless you 🙏

@user-dp3ls4vq2c 4 ай бұрын

Can't see The pattern to copy.

@crr3530 3 жыл бұрын

James this amazing! Very cool video. Will you be selling some for Christmas gifts? I would like to place an order

@JamesKGraves 3 жыл бұрын

Thank you, buddy! I hadn't planned on it, but that's a great idea! I can get a few made up ready for December 👍

@hjc1469 Жыл бұрын

Hey man, thanks for the video. A quick question. I've made the wallet using 2mm thick stiff cow hide and it's too thick compared to yours. Did you use 1.2mm thick leather? Love the wallet by the way.

@rustykocompany825 10 ай бұрын

UNABLE TO ADD ITEM Something went wrong. Please try again.

@rustykocompany825 10 ай бұрын

Problem to download item :(

@bazlur-Vancouver 3 жыл бұрын

You can stitch both sides that it will not fall apart

@JamesKGraves 3 жыл бұрын

Good tip, particularly if you're using a supple leather 👍 personally I tend to use relatively stiff leather, so it's not necessary; been using mine for 9 months now and never had it come apart 😊

@homeyv 2 жыл бұрын

how many cards do you think this can safely hold? great video!

@JamesKGraves 2 жыл бұрын

I typically carry 5 cards with ease, but it can definitely hold at least 6 comfortably if you don't use too thick a leather. 7 will fit but it's tough to get the cards out 😅 you could also try scaling up the template a little if you wanted a bit more clearance. Thanks so much for your support! 😊

@lindaaustin-morin7781 Жыл бұрын

Hi James, just found your video and tried to download the pattern. Is the link still good?

@pirsch69 3 жыл бұрын

Nice project! Which leather thickness do you use ? I think it's important to know, if i use the pattern. Thank you!

@JamesKGraves 3 жыл бұрын

Thank you! I use ~1.5-2mm thick crazy horse leather, there's a link in the description to the specific one I buy 😊

@pirsch69 3 жыл бұрын

@@JamesKGraves Many thanks for the quick response 👍

@JamesKGraves 3 жыл бұрын

No worries! Look forward to seeing how it turns out 😊

@RehmanPiyas 2 жыл бұрын

Should i print the template on a a4 size paper?

@JamesKGraves 2 жыл бұрын

Hey Rehman, sorry if I'm too late. Yes, A4 will work (just double check the sizing with a ruler after printing to make sure it's been printed at 100% true-size) 😊

@optimalreview8368 3 жыл бұрын

I tried to make it, but unfortunately I could`t fold it properly. Please leave a note somewhere to others that use a very thin leather otherwise they`ll waste some leather just like I did. I used 1.8-2 mm leather and the template isn`t big enough for this thickness.

@JamesKGraves 3 жыл бұрын

Hi there, I'm sorry to hear that. I've used leather in the past which is nearly 2mm thick and haven't had any issues, though in this case a soft leather makes life easier; the rear slit has been left out on the design to enable different thicknesses to be used (within reason). Have you measured the template to verify that it was printed to scale? I know that depending on how I print the PDF, the scale can come out a little off sometimes.

@artangulo4550 Жыл бұрын

Hello. Is this pdf pattern still available for free? I would like to make one.

@JamesKGraves Жыл бұрын

Sure is! There’s a link in the description to where you can download from my website 😊

@fjdhmhjrvg5540 Жыл бұрын

It is beautiful but u better secure it from the inside bec it unfolds easily an opinion from a leather crafter 😜

@NotUndertaleAaron 3 жыл бұрын

Can this fit dollar bills?

@JamesKGraves 3 жыл бұрын

I'm not too sure on the size of dollar bills, but folded pound notes can be slid in if necessary (though I use an external money clip that I made). The size is exactly that of a credit card, so anything up to that size will fit!

@NotUndertaleAaron 3 жыл бұрын

@@JamesKGraves oh ok thanks man!

@lucawhitlock7802 3 жыл бұрын

Always an awesome video mate! Where did you get your leather..?

@JamesKGraves 3 жыл бұрын

Thanks, Luca! Oh yes, sorry about that one, I've just updated the description! I've added the Amazon link to where I bought mine in UK; I imagine there are leather suppliers who will sell cheaper in larger quantities, but for the first few projects I found this stuff is excellent quality and ages really well 🙂

@rustykocompany825 10 ай бұрын

Help me

@followhim9689 3 жыл бұрын

The Amazon link takes you straight to the 6x12 piece of leather... i ordered it and I just received the 6x12 leather... it looks too small.. am I supposed to order the 10x10 piece of leather instead for this wallet?

@JamesKGraves 3 жыл бұрын

Hi there, you'll need a piece of leather at least 8x12 inches for this project. Apologies, I guess the link must have been changed and redirected you to a different size; it should be updated now to the correct listing. I hope you were still able to work through this project!