How to Make a Line Bracelet (Jewellery Works) Full Video Tutorial

Рет қаралды 37,369

4 жыл бұрын

Get 90day's Free Shopify Trial bit.ly/90days4
How to Make a Line Bracelet (Jewellery Works) Full Video Tutorial
Shopify In response to the Lockdown is giving 90 days free with this link bit.ly/90days4free
We manufacture jewelry (jewellery) by hand. In this video, we share some insight into the process of making a Line Bracelet. Enjoy, Thanks for Watching!
Social Media:
IG: @jacothejeweller
FB: / jewelleryworks
Twitter: Coming soon
Share This Video With A Friend: • How to Make a Line Bra...
KZfaq Channel: bit.ly/JacoTheJewellerKZfaq
I just pre-ordered my copy of “Traffic Secrets!” 😀
All I had to do was pay a tiny shipping charge. That’s it.
Here’s the link to get your Free copy: bit.ly/3bXO7nt
I've been making jewelry (Jewellery) completely by hand for over two decades now. This channel is for those who are passionate about the trade and looking for new solutions and tricks to better themselves.
Tags
================================================================================
how to make,line bracelet,gold smith,goldsmith,Jewellers,Jewelry,smithing,Jaco Jordaan,Emerald,ring,casting,manufacturing,manufacture,rolling,burning,metal,red hot,soldering,hammering gold,gold,18ct,yellow gold,white gold,Jewellery Works,emeralds,jewelry making,jewelry,goldsmiths,goldsmiths london,goldsmiths design,bracelets,how to make jewelry,goldsmithing artisan jewelry,goldsmithing,bobby white,jewelry tutorial,step by step jewelry making,tennis bracelet
================================================================================
Affiliate Disclaimer: While we receive affiliate compensation for reviews / promotions on this page, we always offer honest opinion, relevant experiences and genuine views related to the product or service itself. Our goal is to help you make the best purchasing decisions, however, the views and opinions expressed are ours only. As always you should do your own due diligence to verify any claims, results and statistics before making any kind of purchase. Clicking links or purchasing products recommended on this page may generate income for this website from affiliate commissions and you should assume we are compensated for any purchases you make.
================================================================================

Пікірлер: 106

@jacothejeweller 4 жыл бұрын

Thanks for all the views so far - You guys are great 👍🏻

@jacothejeweller 3 жыл бұрын

@Aboriginal Ancient jacothejeweller@gmail.com

@offtherip8011 2 жыл бұрын

@@jacothejeweller thank you ., I would like to make a tiny iced out piece ., I will email you soon

@gelato73agustin24 Жыл бұрын

How did you make the tube did you pour it

@jacothejeweller Жыл бұрын

@@gelato73agustin24 I bought a piece which was the size of the stones needed. Usually I make tubes from scratch, but for something like this it makes more sense just to buy a piece.

@gelato73agustin24 Жыл бұрын

@@jacothejeweller and one more thing would you recommend any books on on gold or jewelry smithing I want to learn I’m just 19 yrs old want to make it a career

@thomasmorrison4075 11 ай бұрын

Really liked the idea with the square punch to make an indentation where the prongs will be added to the outsides. Haven't seen that before. Otherwise I would really use a small lathe to cut off the tube sections. They really need to be square and the same length to 0.05 mm. I don't think a beginner can understand how difficult it is to get the necessary precision. Nice work.

@jacothejeweller 11 ай бұрын

Thanks Thomas, a mini lathe is high on my wish list. Which one would you recommend?

@smyslych 3 ай бұрын

Спасибо, Мастер!!!

@olegpetelevitch4443 8 ай бұрын

Thank you ! Love the way you show and explain ! Australia 3rd generation jeweler . I like to see others work and new ideas and how different people do things !

@jacothejeweller 8 ай бұрын

Great to have you here. Thanks for that. Please feel free to add anything. I’m doing these to educate and the feedback helps everyone who reads the comments. You guys down that side have some seriously good skills.

@MM-gl8zh 3 жыл бұрын

I’m working on a line bracelet (only tubes no claws, its for cabochon shape stones) and was stuck at marking the perfect middle to drill the holes. So thank jou for the idea to stamp the square tool inside! Super!

@ARMADAPUBLISHERS4106 4 ай бұрын

I would like to see a tennis chain done. This orientation is great for bracelets but chain transitioning around the neck would need a different approach I think.

@user-dc6in6cf4w 3 ай бұрын

Great example of old world craftsmanship !! The same method can be used with square, oval, pear tube for fancy shapes,, thanks so much 👍

@jacothejeweller 3 ай бұрын

Ah thank you! Yes, it’s an old world mechanism - and you’re right, absolutely can do 👍🏻

@callmekells802 Жыл бұрын

Wow this is incredible. True craftsmanship. No shortcuts over here!

@janicecooper875 2 жыл бұрын

Fabulous Jaco. So this must be how you make a tennis bracelet. It has a bit of movement in it too. Thanks a million. I would love to sit next to and learn more. Thanks again.

@jacothejeweller 2 жыл бұрын

Such a pleasure Janice. There is a follow up video to this one too. Thanks for the feedback 🙏🏻

@MsJulianaPedroso 3 жыл бұрын

Great tutorial mate! Thanks again!

@thaibui5911 3 жыл бұрын

Thanks

@jewelrymakingtutorialsbyha1252 4 жыл бұрын

Excellent video, from on SA teacher to another!

@jacothejeweller 4 жыл бұрын

Jewelry Making Tutorials by Hans Meevis Dankie Hans. Ek leer met elke keer 😂

@mitsospapas3306 4 жыл бұрын

Well done great job very helpful. Thanks a lot

@jacothejeweller 4 жыл бұрын

mitsos papas 🙏🏻

@jakekattan5515 2 жыл бұрын

Jaco thanks fir a great video keep them coming

@jacothejeweller 2 жыл бұрын

Cheers for that. I’m on it 👊🏻

@katherineplender3642 Жыл бұрын

You make it look so easy. I have only just got into fine jewellery. Your video is fantastic.

@jacothejeweller Жыл бұрын

Good luck with your journey. I’m slow at making my videos but the idea behind them is to help. I appreciate you having a look. Next one is coming soon 👍🏻

@mman6283 3 жыл бұрын

Nice

@tiberiudascalu9246 Жыл бұрын

Great tutorial!

@jacothejeweller Жыл бұрын

Thanks for watching - I’m glad you found it useful.

@antonioflambo7211 3 жыл бұрын

Can you make a video on how too make a box clasp

@jacothejeweller 3 жыл бұрын

Hey Antonio, I touched on that in the follow up video to this one, but should do one with more detail. I’ll pop it on the list 👍🏻

@fernandogutierrezcastro2702 3 жыл бұрын

Hola Jaco Exelente explicacion .... un abarzo.

@jacothejeweller 3 жыл бұрын

Gracias Fernando 🙏🏻

@Basmatiminarii 2 жыл бұрын

I've got that saw frame too,love it

@jacothejeweller 2 жыл бұрын

Hey Vanessa, I’m a bit of a fan of saw frames. I use different gauges with different frames - so there are four different styles of frames I use. But this one is magic 👌🏻

@Basmatiminarii 2 жыл бұрын

@@jacothejeweller oh ok. I've got that one in the video and just a traditional old school frame. Lots of goldsmiths have a "thing" for having different frames. So many styles out now. Also I stopped using a hanging motor and just have a foredom micromotor. I dont think I'll ever use the hanging motors again.

@jacothejeweller 2 жыл бұрын

@@Basmatiminarii Its easy to get a tool addiction in this trade. I am holding on to old school manufacturing ways but have a love for hand tools. I use the micromotor for set work. Lovey tool.

@flippersteyn5232 4 жыл бұрын

Cool video looking to more 😁workshop looks gooood

@jacothejeweller 4 жыл бұрын

flipper steyn Thanks Naldo. Yep, I’m still tool crazy. I will be doing some reviews soon so keep watching buddy.

@wissiwizard4536 3 жыл бұрын

Thanks for this that was brilliant!

@jacothejeweller 3 жыл бұрын

I’m busy editing the video that follows up to this one. A complete bracelet video I just finished in platinum. Hang in there. It’ll be up soon 👍🏻

@wissiwizard4536 3 жыл бұрын

@@jacothejeweller I’ll sub now brother!

@XLUSIV Жыл бұрын

Good stuff man!

@jacothejeweller Жыл бұрын

Thanks Charlie 🙏🏻

@thaibui5911 3 жыл бұрын

Hope you have videos like that ... good health

@yasminbelkhayat1510 2 жыл бұрын

Thank you for showing that! Excited to make it now 🙌🏻 a jeweller/Mounter for 8years but haven't actually made a tennis bracelet yet 🥳

@jacothejeweller 2 жыл бұрын

It’s such a fun project. Thank you for the feedback 🙏🏻

@finao8231 3 жыл бұрын

Awesome video....I'd imagine it could be a daily wear no problem.

@jacothejeweller 3 жыл бұрын

Thanks for the comment Finao, this bracelet should last a lot longer than the standard ones available - have a look at the follow up video to this one in platinum 👍🏻

@finao8231 5 ай бұрын

Hi Jaco, does this style making applies to a necklace as well?

@Theopalguy 8 ай бұрын

Just curious what kind of bench that is/ bench pin cheers awesome video

@jacothejeweller 8 ай бұрын

That’s all GRS tools. The pin clips on as well as the solder station and a vise and and and … lots of variation 👌🏻

@flyingcheff 4 жыл бұрын

I loved this and learned so much. The square stamping tool, brilliant. I am not familiar with line bracelets. Is the goal to have a slightly flexible bracelet but not have it be a link-like bracelet? I'm not quite sure how it can be soldered together so closely, still move and not create stress over time that will snap the wire (like a bread bag twist-tie). I'm so glad I subscribed, I want to learn these more advanced techniques! I wish there was a little bit of a description of what the line bracelet is, why it is called that, and the goal of the mechanisms. Kind of a bigger look at the idea before seeing the steps. But, it's all excellent. I am grateful for your time and generosity. I'll be watching everything you make.

@jacothejeweller 3 жыл бұрын

This is such lovely feedback - Can't understand why I missed it. Thank you for all your input. I will take it on board.

@fieldmarshaljoe 3 жыл бұрын

Hello, great video, looks beautiful. One question, once you bend the wire round and sand the bottom, are you soldering them the wires to themselves? I know you cant solder it to the link as obviously the link would be stiff then and would be a bangle not a bracelet, but without soldering the wire to itself I cant see how constant movement over time of the bracelet wont make the wire come loose in time and separate

@jacothejeweller 3 жыл бұрын

Hey, you just solder the link to the next tube. The looped area where the wire passes through allows for movement. Hope that makes sense. I might have explained it in the follow up video - have a look.

@daniellelooije1193 3 жыл бұрын

Can you make a video how to make a conic pear bezel setting?

@Mysteryp7 Жыл бұрын

Subscribed! Do you also have how to put stones? And make them not fall out?

@jacothejeweller Жыл бұрын

I do. There is a second video which follows up this one where I set the diamonds 👍🏻

@Mysteryp7 Жыл бұрын

@@jacothejeweller THANKS I will look for it.

@karbone9748 3 жыл бұрын

hello, is it the same process for the tennis chain please? I ask that for the orientation of the stone in the pendant of the chain. Thanks a lot and your work is really amazing! good continuation. I'm a novice on it.

@jacothejeweller 3 жыл бұрын

Hey Karbone 974, are you making a necklace? Send me an image on Instagram (jacothejeweller) so I can get an idea 👍🏻

@offtherip8011 2 жыл бұрын

Nice !!! You have saved me $5,000 because I want a very tiny chain ., every one want a huge chain .,

@jacothejeweller 2 жыл бұрын

I’m glad I could help 👍🏻

@yasinshuman6821 3 жыл бұрын

Hey jaco, great video. Did you solder the end of the wire to the head once you folded it back?

@jacothejeweller 3 жыл бұрын

Hi Yasin, I do. I am currently making the platinum version of this bracelet and will make a video to explain in fine detail 👍🏻

@alexandrasun9821 2 жыл бұрын

Hey! first of all thank you for your video, thats a great help. Just to make sure- you do not solder the links, right? its just the wire bending that keeps it together?

@jacothejeweller 2 жыл бұрын

Sure do Alexandra. They all need to be soldered once they are folded round.

@MichielsCedric Жыл бұрын

Great video, thank you !!! Just to be certain... in order to keep the flexibility between the elements, the folded rod should be welded only on the element linked to the rod, correct? If we weld on both elements, the whole line would be stiff, right? You may have specified it in the video but my English is not very good so I may not have understood... Thank you in advance for your answer.

@jacothejeweller Жыл бұрын

Your English is great Cédric. Yes the bar loops through the link and gets soldered to the same one it came from 👍🏻

@TheCreativeclass 6 ай бұрын

How do you make a triple line bracelet, will you do a video on that?

@kasunwijendra3732 2 жыл бұрын

After 11:26 so do u like solder it I don’t see what u do next but u just smoothen it ,does it work that way?

@jacothejeweller 2 жыл бұрын

Hi Kasun, yes I do indeed. I cover it in the follow up video which you can view here 👉🏻 kzfaq.info/get/bejne/rbKjYNeEz62mk6c.html

@Saywhatohno 3 жыл бұрын

great video but will this bracelet bend to fit the wrist, looks rigid?

@jacothejeweller 3 жыл бұрын

Hi Fahad, I’ve recently finished the platinum version of this chain. By the time you join all the links together the bracelet develops a lovely movement . I started tight so to have an end result that is more relaxed. The platinum video is coming soon and will explain it all. Thanks for watching 👍🏻

@lianriswart7523 2 жыл бұрын

Stunning, btw, did you make your Dobie's chain yourself? :)

@jacothejeweller 2 жыл бұрын

Thanks Liandri, en nee, silwer of goud of selfs platinum sou hom nie hou nie 😂

@josejoshuam2007 3 жыл бұрын

Pls make a tutorial for oval shaped stone ring.

@jacothejeweller 3 жыл бұрын

Jose Joshuam - I have a tutorial coming up on an oval diamond ring. I will upload as soon as I’ve made it.

@zackaus2605 3 жыл бұрын

My friend awesome video can you pls tell me how to make that tube please thanks.

@jacothejeweller 3 жыл бұрын

Hi Zack, typically you’d prepare a strip of metal the height you want and in this case, about 0.7mm thick metal. You get the length by taking the stone diameter and multiplying it by pi. But for me, I just bought tube. Hopes this helps.

@zackaus2605 3 жыл бұрын

@@jacothejeweller thanks a lot my friend I just watch your other video too. Wow amazing

@nathanzech364 5 ай бұрын

Did you make the tube that you started with? Or is that something you can buy?

@jacothejeweller 5 ай бұрын

For something like this I usually just buy the tube Nathan. Here in the UK and you can buy just about any size and length you need in every metal so when it comes to these line bracelets it makes sense. Making the tube is a lot of fun though.

@nathanzech364 5 ай бұрын

@@jacothejeweller Thanks for the reply! I will look into buying some tubes so I can try this.

@katherineplender3642 Жыл бұрын

I want to know how you keep your bench so tidy!

@jacothejeweller Жыл бұрын

😄 I’ve been accused of that. But to be honest, the workshop gets pretty crazy at times.

@SahilKhan-xs2rl 11 ай бұрын

App kha se ho

@rashijain8037 4 жыл бұрын

What we call this bracelet linking?

@jacothejeweller 4 жыл бұрын

Hi Rashi, It's often called a 'tennis bracelet' but here in the U.K most people call it a 'line bracelet'

@rashijain8037 4 жыл бұрын

@@jacothejeweller That's fine but I am asking what you call linking(joining) of tennis bracelet.

@zoomman96 Ай бұрын

Kind of annoying that you don't show how to make the tube

@jacothejeweller Ай бұрын

That’s actually a good video idea 👍🏻

@zoomman96 Ай бұрын

@jacothejeweller we'd all appreciate it you did. I have all my own gold so buying tubes isn't any option.

@karenshiri4494 3 жыл бұрын

As a beginner I really wanted to know how to actually make the bracelet rather than just the tools. Can you perhaps show how the tools are applied to making a tennis bracelet please?

@jacothejeweller 3 жыл бұрын

Hey Karen, I will talk a bit more on tools in future vids. Thanks for that and good luck with your path to learn the trade. Lot of fun this.

@canethejeweller 3 жыл бұрын

Would be able to tell me how u would do a double line bracelet ?

@canethejeweller 3 жыл бұрын

How would u connect two together?

@jacothejeweller 3 жыл бұрын

Ahh. Interesting question Cane, I’d have to judge every job as it’s own but if it was this type, I’d probably just join every fourth setting together to keep them next to each other and uniform. Or perhaps burnish a wire through both. You got me thinking now 😂

@jacothejeweller 3 жыл бұрын

@@canethejeweller For some reason I cant find your new comment - but I think i addressed the thickness in the follow up vid. Can't recall it off hand right now. Perhaps 0.7mm?

@canethejeweller 3 жыл бұрын

What is the tool called that u used at 8:18 ?

@jacothejeweller 3 жыл бұрын

@@canethejeweller Answer lies in 2:46 in this video 👉🏻kzfaq.info/get/bejne/rbKjYNeEz62mk6c.html