How to Make a Modern Dresser | DIY Modern Farmhouse Dresser

Рет қаралды 288,936

Күн бұрын

This DIY modern dresser video will guide you in building your very own beautiful dresser. I feel like this is one of my best builds to date. Build plans here www.731woodworks.com/store/mo...
This is a step by step how-to build a dresser video. This DIY modern farmhouse 2.0 dresser is a gift for my daughter. I loved working with new techniques and building something I had never built before. I had never attempted a dresser build, but this one came out great. I used full extension ball bearing drawer slides. I show you how to build drawers in this dresser. I dress up the ends of this farmhouse dresser with cove molding. I also tapered the legs to give it a little something extra. This style is like a contemporary glam or modern dresser. I used a stain blocking primer before applying 3 coats of Benjamin Moore White Dove paint. I am so proud of how this project came out. I was a little nervous going into the project but it was something that I wanted to attempt. I watched a few videos online to get a grasp of how to go about building the dresser, then jumped right in. The fabulous glass drawer pulls really set it off in my opinion. If you are looking to build a similar dresser or chest of drawers, check out the video.
This dresser features seven large drawers with full extension slides. The dresser measures 38 inches tall, 18 inches deep and 61 1/2 inches long. The supplies used to build this project include: 2 sheets of 4’ x 8’ 3/4” sanded birch plywood. 1 sheet of 1/4” plywood. One 2x8x8’. Three 1x6x10’. 1-1/4” pocket hole screws. Wood glue. Seven pair of full extension ball bearing drawer slides. 20 feet of cove molding. Drawer pulls. Primer and paint. This project was a little more expensive with the supply bill coming in at a little over $250.
Join this channels membership to get access to exclusive member only discounts, behind the scenes footage and other perks:
/ @731woodworks
Woodworking build plans: www.731woodworks.com/store
Tools used in This Build
DeWalt Miter Saw: amzn.to/2HJQZtd
Kreg Pocket K5 Hole Jig: amzn.to/2FzLkT5
DeWalt Sander: amzn.to/2HJ9UV3
Kreg R3 Portable Pocket Hole Jig: amzn.to/2PTx0x7
36" Clamp: amzn.to/2THzT0L
Paint Sprayer: amzn.to/2TGfclL
Rubber Mallet: amzn.to/2MYqhzK
Combination Square: amzn.to/2UydWmT
Supplies Used in This Build
Full extension drawer slides: amzn.to/2ZVxhze
Glass drawer pulls: amzn.to/310aKm9
Kreg Screws: amzn.to/2HKF7qR
Wood Glue: amzn.to/2MXWeIz
120 grit sandpaper: amzn.to/2UEpJjE
Paint - amzn.to/2MZWiY1
FixThisBuildThat how to build drawers video: • Easy DIY Drawers with ...
0:00 Intro
1:07 How To Make Dresser Legs
2:54 Cutting Out Dresser Frame
4:51 Assembly of Dresser Frame
10:22 Making Drawers For A Dresser
20:00 Adding Detail To End of Dresser
23:57 Installing Drawer Slides on Dresser
25:54 Building Top for a Dresser
30:00 Installing Edge Banding on Plywood
37:30 Installing Drawer Faces
43:08 Installing Drawer Pulls
51:16 Showing My Mistakes
55:04 Outro
Dusty Vibes t-shirt: teespring.com/stores/731-wood...
Visit the blog for full resolution pictures and details about this project. www.731woodworks.com/731-blog...
Disclaimer: Amazon and other affiliate links are used in this description and they help support this channel. By clicking on the links and purchasing items through Amazon, provides me a very small commission but cost you nothing extra. It is a great way to support small creators like me. I appreciate the support more than you know!
Working with wood and power tools is inherently dangerous. Anyone using any of the tools or supplies used in these videos are personally responsible for learning the proper techniques involved, and he or she assumes all risks and accepts complete responsibility for any and all damages and injury of any kind.
Before using any hand or power tool with which you are unfamiliar, consult its operating instructions, and if necessary, seek instruction by a qualified person well versed in its operation and appropriate safety techniques.
731 Woodworks is intended for entertainment purposes only. There are no warranties implied and your results may differ from ours. You should NOT rely solely upon the information and techniques discussed and displayed in these videos. Rather, you should fully research each technique and decide for yourself what is the safest possible work method for you.
#dresser #farmhousefurniture #modernfarmhouse

Пікірлер: 350

@731Woodworks 4 жыл бұрын

Dresser Build Plans: www.731woodworks.com/store/modern-dresser-build-plans

@techy4one1 2 жыл бұрын

Where can I find the blue print for this design ?

@Expirav1t 2 жыл бұрын

im glad you dropped the glass drawer pull, it makes us feel normal, lol... n not idiots for dropping our own

@chapbix12158 17 күн бұрын

Imperfections add to the character of a piece of furniture or anything else we build.

@r.m.2301 4 жыл бұрын

Outstanding job.... Never be to hard on yourself you did awesome. Thank you for helping us novice woodworkers you give great honest detailed builds.

@731Woodworks 4 жыл бұрын

I appreciate that.

@joshtheweedcoach Жыл бұрын

Just a friendly reminder, look how far you’ve come, even your shop.

@BasedGodEmperorTrump 10 күн бұрын

Another thing is that, his craft maybe woodworking but sadly his biggest source of income is content creation of his furniture rather than selling said furniture for a profit.

@guybowers9094 3 жыл бұрын

Nice project great build. My youngest son bought his first home which was built in 1916 and when it was built they used plank boards to create wainscoting in the living room which we discovered when we removed the old lathe and plaster to put in insulation and drywall. So, my plan is to make a dresser using those boards so he will have a piece of the house for years to come and your video was helpful in my project.

@731Woodworks 3 жыл бұрын

Sounds great!

@billprocter942 3 жыл бұрын

Two things I like about this channel. Most KZfaqrs say you don't need the best tools to build things but they do. This channel uses tools we'd use because we don't have $10k to spend on our shop. The other thing is we are treated like idiots (this is a complement.) Most videos are 10 min. This is an hour.

@731Woodworks 3 жыл бұрын

I appreciate the kind words. I try to stay simple with my tools and projects. I want my projects to be approachable by most anyone that has an interest in building their own items. Thanks again!

@gregwainwright7968 2 жыл бұрын

Looks great! I had to cut 7/8 of an inch off of one of my benches.... now i gotta rebuild BOTH OF EM!

@gregwainwright7968 2 жыл бұрын

Ended up rebuilding it all but the table tops! Looks really good i feel

@cssweatman 3 жыл бұрын

"Seen my tape measure?" That's the broken song in my head every time I'm working. Great job on this build, my good man.

@731Woodworks 3 жыл бұрын

lol. Thanks

@crimsonwoodworking9609 4 жыл бұрын

Nice. I was told to never point out your mistakes, because no one will ever notice.... But you. Keep up the great content.

@731Woodworks 4 жыл бұрын

Thank you

@haroldaubry8344 4 жыл бұрын

Great job! And thanks for pointing out the subtle imperfections. I try hard to make my projects perfect and get frustrated seeing my mistakes, though many are probably only noticeable to me. Thanks for sharing.

@731Woodworks 4 жыл бұрын

Thank you for the kind words!

@bencorley8687 2 жыл бұрын

Maybe build another dresser with the tools you have now. Cool to see the places you start from but wanting to see how your process would improve over the years. Great video.

@speedracer210 4 жыл бұрын

Nice job brother. I grew up doing woodworking, construction, carpentry, and from a professional point of view you did a really good job there's nothing to put yourself down for. A really good nail hole filler believe it or not is sheetrock joint compound, it sands easy and paint easy. Again...great job. God bless you and your family.

@731Woodworks 4 жыл бұрын

I appreciate the kind words!

@gilcd85 3 жыл бұрын

Thank you very much for this video Matt! I built a dresser based on your plans and it came out amazing. Getting all kinds of compliments for it :)

@731Woodworks 3 жыл бұрын

That's great to hear!

@Drell0627 4 жыл бұрын

Another great build!! Your explanations in what you do keep it simple and efficient. Your style of building and assembly is almost just like my style. You can make really nice things without having a huge dedicated workshop with high dollar tools and equipment. Plus with you pointing out errors and issues, it keeps it real...because we "All" make mistakes. Keep up the awesome projects.

@731Woodworks 4 жыл бұрын

I appreciate the kind words! Thanks for the support!

@Diegojuarez1987 4 жыл бұрын

Exactly what i want to comment! Great video! Thanks!

@jeanmartin6410 3 жыл бұрын

I wish my work was as “imperfect” as yours. Amazing build. Thank you for taking the time to do this.

@731Woodworks 3 жыл бұрын

Thank you

@earlyhorizon 3 жыл бұрын

Beautiful

@731Woodworks 3 жыл бұрын

Thank you

@DISP-CEPTED Жыл бұрын

Love the use of spacers.

@ttttenney 2 жыл бұрын

Watched your video about 8x and built an incredible looking dresser, thanks to you. Wish I could post a picture to show how instructional your video was.

@731Woodworks 2 жыл бұрын

Awesome. You can message me on social media @731woodworks

@Frankreddy62 3 жыл бұрын

I have been binge watching your videos for the last few days. I am very impressed. You build very useful projects with minimal tools and everything comes out beautifully. This dresser is awesome. You should be proud. As you get more experience and confidence, it really shows. When i build things like this, that are going to be painted, i use some latex caulk at all the seams, especially where the cove molding meets the panel. It fills those little gaps and nobody will ever know. Keep up the good work. You are very inspirational to many woodworkers.

@731Woodworks 3 жыл бұрын

Thank you

@joeycannon9497 2 жыл бұрын

So happy you have the air conditioner now. You've worked so hard to get where you are now. Proud of you man, thank you for sharing your builds, and progress.

@731Woodworks 2 жыл бұрын

I appreciate it

@RonComstock Жыл бұрын

great build, I wait to put back until last. more access for intalling drawer guides.. Drawer faces trick... after edge banding over hang to front face of drawer, use a 1/8 round over to flush trim and clean up the small tearout on plywood.

@thedieiscast9729 3 жыл бұрын

That's a nice dresser!

@glaciergrainconcepts476 4 жыл бұрын

We are our own worst critics. The way I see it is, the flaws make it handmade. Looks killer man! 🔥Keep up the great work and thanks for the amazing and in depth video. 👊

@731Woodworks 4 жыл бұрын

Thank you for the support!

@daveprice9128 3 жыл бұрын

Great Job

@731Woodworks 3 жыл бұрын

Thank you

@duenge 2 жыл бұрын

Good Daddy! I just built my youngest daughter your farmhouse bar, and added a lower shelf made with 3" slats. My first real pocket hole project. Turned out nice. I left it in sections so it would fit in her car for the 12 hour ride back to South Carolina. She will use it as her TV stand. Great channel.

@wesnkat 4 жыл бұрын

Best video of this type I've seen Matt,Thanks for sharing. You make it so simple.Beautiful dresser

@731Woodworks 4 жыл бұрын

I really appreciate that!

@handsmcneil 3 ай бұрын

So I always say aloud how nice your work is and as I remark how perfect the drawer spacing came out my fiance says.. well tell him, even if its an old video.. so.. really great work the whole thing turned out great.

@731Woodworks 3 ай бұрын

thank you!

@ericmay7259 Жыл бұрын

Matt this Dresser is beautiful Awesome Job Brother!

@174859607 3 жыл бұрын

You are really hard on yourself and honest to show the flaws!

@731Woodworks 3 жыл бұрын

👊🏻

@zibbyabcd7120 3 жыл бұрын

Dood You did a very nice job. Thanks for all the info on the build. I really appreciate your generosity.

@731Woodworks 3 жыл бұрын

Thank you

@ftnirish74 4 жыл бұрын

Great video as always. My daughter is looking for dresser ideas and she loves this version. Love the videos because your like 99% of us using tools we "commoners" use. No Festool and crazy joinery here. Keep kickin' out great content.

@731Woodworks 4 жыл бұрын

Thank you. That’s the goal of my channel! Use regular everyday tools to build cool stuff.

@mkhenebuli7903 4 жыл бұрын

Thank for taking your time & editng skills to show this video with us

@731Woodworks 4 жыл бұрын

Thank you. Glad you liked it!

@texanpride1979 3 жыл бұрын

Awesome build brother. Looks absolutely amazing!!!!! I can’t wait to get my table saw and other tools I ordered later this week. Definitely keeping an eye on your builds for motivation and ideas. God bless you and your family and your business!!!

@731Woodworks 3 жыл бұрын

Thank you

@edward_dantonio 2 жыл бұрын

Excellent job!

@christopherhart5998 4 ай бұрын

Great job , im actually building a dresser right now . I was going to build overlay drawers but after seeing your build I'm going flush drawers , a much classier look . Thanks

@vivianavasquez7922 3 жыл бұрын

is perfect she is going to be so happy that you did it for her!!!!

@731Woodworks 3 жыл бұрын

Thank you

@Celestial_Wellness Жыл бұрын

Awesome video. Plan on using this with some personal mods to make my own. You made it seem so simple but I know getting everything to line up is a huge pain. Thanks for the content!

@brianbarlow1480 3 жыл бұрын

Nice work sir

@731Woodworks 3 жыл бұрын

Thanks

@nthewind081 4 жыл бұрын

Absolutely one of the best projects you have made !!

@731Woodworks 4 жыл бұрын

Thank you 🙏🏻. It was a fun build and came out much better than I expected. I’m proud of this one lol.

@pamelagreene9417 3 ай бұрын

This is a WONDERFUL tutorial! Well explained and good camera work so that what you are doing is seen. Thank you so much!

@stonecrazy3 4 жыл бұрын

Awesome Build Matt! My wife has been bugging me for a new bedroom set and I think you just gave me the inspiration needed to do it. Keep up the great work dude!

@731Woodworks 4 жыл бұрын

Thanks! That’s great to hear. Please share pictures with me if you build the set.

@stonecrazy3 4 жыл бұрын

731 Woodworks sure will, just don’t expect em anytime soon my current honey do list is already over flowing. Lol

@731Woodworks 4 жыл бұрын

@@stonecrazy3 lol nothing wrong with that.

@dakotablack2527 9 ай бұрын

Older video I like a lot I wish you could maybe revisit this project using exotic woods and painted frame with walnut faces or something or new over all design love the patience and the fact you are an unashamed Christian 😉👍 is awesome love love love the content

@barrymorehead9056 2 жыл бұрын

I think you did a great job 👏

@derekbutler4015 2 жыл бұрын

That little girl is going to need a matching mirror for that dresser. Good Job! Keep the videos coming.

@JagoditzWoodworking 4 жыл бұрын

Awesome job and absolutely great video. I find myself watching more and more of yours. Down to earth and exactly what I hope to be able to do someday!

@731Woodworks 4 жыл бұрын

Thank you for the kind words! I am glad you like the videos.

@erichelm4339 2 жыл бұрын

This is wonderful

@hspratt3 2 жыл бұрын

Thanks for all your videos. Since I found your channel it has really inspired me to want go out and make things. My only problem is that at this moment I have nowhere to do it. I do have a lot of the tools required that I’ve collected over the years so hopefully soon I will have me a location where I could actually use them to build. Keep up the great work and videos and also keep sharing your faith as you do love it. I am a fellow brother in Christ.

@bobso7638 3 жыл бұрын

excellent job!!! in my opinion

@brooksrf231 2 жыл бұрын

Nice job brother

@Mroach52 3 жыл бұрын

Thanks for posting, adapted to make two dressers for my daughter she loves them. That tapering legs on the miter saw is a little dicey and screwed up on that more than I want to admit lol. Came out great.

@731Woodworks 3 жыл бұрын

That’s great to hear

@evelynmueller6523 3 жыл бұрын

Thanks Matt, I learned a lot with this build...fantastic results!!!

@731Woodworks 3 жыл бұрын

Great to hear!

@dainalr 4 жыл бұрын

Beautiful and inspiring work! Makes me think I can do one for myself, keep the videos coming! I absolutely love how there was no music in the background and you explained as you went very nicely done!

@731Woodworks 4 жыл бұрын

Thank you. I think you could do it! Give it a try.

@kennethmurphy8192 4 жыл бұрын

Great build! Great video! I love the “thin blue line” flag on your wall in the background. Keep up the great work! Thx!

@731Woodworks 4 жыл бұрын

Thank you. I did a video on how to build that flag if you want to check it out here: kzfaq.info/get/bejne/o5h8pKaK39GznKc.html

@dylan199009 3 жыл бұрын

Even though I would never attempt a project this complex, I appreciate the video. I learned a lot and you make it look too easy. Working on the farmhouse coffee table now! I'll send you the finished result on instagram!

@731Woodworks 3 жыл бұрын

I bet you could build this if you take your time. Can’t wait to see the coffee table

@designsbyJ 3 жыл бұрын

Great build!👍🏻

@731Woodworks 3 жыл бұрын

Thank you

@neabowhunters8107 3 жыл бұрын

Hello from Jonesboro arkansas thanks for the build fixing to tackle is for my daughter. Love your channel. I built my mom some of your farmhouse tables...

@731Woodworks 3 жыл бұрын

Hello neighbor! That is awesome!

@russmartin4189 3 жыл бұрын

I found out the hard way not to drive Kreg screws with an impact driver. Drove them too deep and popped the surface veneer of maple plywood. Use drill on clutch setting of 4.

@731Woodworks 3 жыл бұрын

Good tip

@dvdgnzlz25 3 жыл бұрын

Same exact thing happened to me. I now use my m12 on 6 torque setting.

@731Woodworks 3 жыл бұрын

@@dvdgnzlz25 yeah, you have to be careful for sure

@_RocketRooster 3 жыл бұрын

Those imperfections give the piece character! If it was built by a computerized robot it wouldn't have any character, therefor it wouldn't be worth but maybe half the price!

@markm921 3 жыл бұрын

Enjoyable video, and build. Like your style.

@731Woodworks 3 жыл бұрын

Glad you enjoyed it

@sierra14wd71 Жыл бұрын

For the knot holes I use Bondo then sand it smooth prime and paint

@quentinsherratt7969 3 жыл бұрын

Good work bud looks great 🎯💯

@jerrypowell784 2 жыл бұрын

Very nice.

@rchavez5056 4 жыл бұрын

Great job Matt. Just a thought, but you can cut a small piece of 1\4 plywood to put in the corner grooves to line them up during assembly.

@731Woodworks 4 жыл бұрын

Great idea! Never thought of that! I’ll certainly do that from now on!

@marvac59 3 жыл бұрын

Great job love your design

@731Woodworks 3 жыл бұрын

Thank you

@sweetalohadesigns1994 4 жыл бұрын

Beautifully done! 👏

@731Woodworks 4 жыл бұрын

Thank you

@ScottWhite30809 9 ай бұрын

Your video production skills have improved substantially since this video. Love watching your stuff brother.

@731Woodworks 9 ай бұрын

Thank you 🙏🏻.

@josephmartin8160 Жыл бұрын

I really enjoyed your video and learned a few things along the way. The dresser turned out really nice, great job! God bless you brother!

@731Woodworks Жыл бұрын

Thank you

@nonologylol 4 жыл бұрын

Wow your wife is so lucky. You can make a custum jewlery holder to a womans dream!

@731Woodworks 4 жыл бұрын

I think I am the lucky one! She's amazing.

@bryanbatts 3 жыл бұрын

Awesome build!!!

@731Woodworks 3 жыл бұрын

Thanks!

@hsitnek 4 жыл бұрын

Good afternoon from Trinidad & Tobago! Excellent build, sir. Loved your video from beginning to end, for it's simple and detailed explanations of each step in your build. I'm presently building a 3-door chest of drawers & a 4-drawer chest of drawers, both with baby-changing tables on top for my 2 newborn nephews. I was trying to figure out how to put the spacers between each level of drawers, but to hide them under the drawer faces....how to measure & space them. YOur video is the only one I found that explained how to do that in part. Thanks for the inspiration. Looking forward to seeing more of your builds.

@731Woodworks 4 жыл бұрын

Great! So glad it helped you!

@ronhansen7717 3 жыл бұрын

Good job on the dresser. I realize this video is two years old and I'm sure you've gained a lot of experience and you probably don't need to know the suggestions that I have to make, but here goes anyway. When you were concerned with lining up the grooves on the drawer boxes, make a simple jig of two 45/45/90 triangles, about 3" or so stacked on top of each other offset by the depth of the groove topped with a third piece to go over the top (bottom edge) of the drawer. Put it in the corner while assembling the drawer and it will keep everything perfectly aligned. When trimming edge banding, there is a tool specifically for that. If you are planning on doing a lot of edge banding, you may want to get one. There are many of them out there and they're not expensive, so see what's best for you. You were worried about the spacing on the drawers. You did a great job on that for flush drawers. If you don't necessarily want inset drawer fronts, you may want to make overlap drawer fronts. Alignment and spacing is much easier, if that is the style that you are looking for. Ricky Nelson (my generation) once said in his song, Garden Party, "You can't please everyone, so you've got to please yourself". Give yourself a break and be pleased with this build, Excellent!

@lochavenwoodworks6578 3 жыл бұрын

Another brilliant job Matt. I’ll be tackling something similar soon. I’ll definitely be using many of your tips n tricks. Thanks. 😁

@731Woodworks 3 жыл бұрын

Thank you

@Danceboy968 2 жыл бұрын

Great Video, and your Style is Vera Good. Gruß Jürgen aus dem schönen Saarland

@michaelmadden4301 Жыл бұрын

The knob screws are 10-32, if you get screws that are too long, if you have a set of wire stripper pliers, they usually have threaded screw holes that can be used to cut those screws. Just an FYI, not trying to stick my nose in your business. I enjoy your videos, thanks for sharing.

@CB71SS 4 жыл бұрын

This one of the best dresser builds I have seen. Got some really good tips on it. I am pretty hard on myself as far as flaws go and you are the only person I have seen who has pointed out their slight miss calculations. Great looking dresser and I have built some out of 3/4 inch plywood and yep they do get real heavy. Great job. Live in TN and know all about that heat index.

@731Woodworks 4 жыл бұрын

I appreciate the kind words!

@CB71SS 4 жыл бұрын

@@731Woodworks Nothing but pure honesty.

@estebancastano8543 4 жыл бұрын

Nice project! Thanks for sharing your design, you gave me a couple of ideas that I’m goin to use on a dresser that I’m going to build in the future. Keep up the good work 👍

@731Woodworks 4 жыл бұрын

Great to hear! Thank you!

@chrissleblanc 4 жыл бұрын

One rule of thumb I use when making drawers the Grove for the drawer should be the same thickness of the ply your using for the drawer "reason being if it should fail you can cut the thickness in a strip to repair it "

@charliebowen4232 3 жыл бұрын

Hello Matt, That turned out fantastic! I really want to make some big pieces like a dresser! Thank you for your videos... I am a big fan! -Charlie

@731Woodworks 3 жыл бұрын

Thank you

@woodprojectswithalex2692 3 жыл бұрын

Great Dresser!! Thank you for sharing that with us. Honestly, I love every single of your project that you made it. I really do not know that you're using SketchUp to design your project with that or not but I'm using it and make everything easy, fast, and reliable to build-up. SketchUp makes is each project's mistake minimize

@731Woodworks 3 жыл бұрын

Thank you. I’m not using it. I don’t know how or have the time to learn it right now.

@crazybigyo 3 жыл бұрын

Looks great man!

@731Woodworks 3 жыл бұрын

Thanks!

@brianmeier915 3 жыл бұрын

great job i have learned so much from you thank u

@731Woodworks 3 жыл бұрын

Thank you

@timothybrown1433 3 жыл бұрын

Very nice

@bellscustomwoodworking9058 4 жыл бұрын

Great video, I always enjoy making furniture. I recently made my wife a mahogany and maple end table

@731Woodworks 4 жыл бұрын

That is awesome!

@bellscustomwoodworking9058 4 жыл бұрын

@@731Woodworks her dad gave me the mahogany and some walnut lumber when he couldn't make anything anymore. That piece is special to her

@731Woodworks 4 жыл бұрын

@@bellscustomwoodworking9058 oh wow. That's really great.

@fmmatty 3 жыл бұрын

Great video...very entertaining (warshers) Great build...very informative! Thank for sharing your talent.

@731Woodworks 3 жыл бұрын

Lol thanks

@andersonsidney69 4 жыл бұрын

I think to kept the grooves inline take a 2x2 1/4 inch and inset them in the corners

@rchavez5056 4 жыл бұрын

I wrote my comment then noticed that you said the same thing. 👍👍

@madesupplyco.1392 3 жыл бұрын

Good stuff Buddy! 🏁

@731Woodworks 3 жыл бұрын

Thanks 👍

@johnpiegzik298 3 жыл бұрын

Awesome build and great tips and tricks! Thanks for sharing the project really turned out great!! Thx John 😎👍

@731Woodworks 3 жыл бұрын

Thank you 👊🏻

@davidgreen437 3 жыл бұрын

Love the build and love watching your videos you've gave me some great ideas

@731Woodworks 3 жыл бұрын

Thank you

@abelwondafrash 3 жыл бұрын

Loved it! Always helpful to watch your builds.

@731Woodworks 3 жыл бұрын

Glad you like them!

@RiverJumper7 2 жыл бұрын

Thanks good video

@snarfweasil 4 жыл бұрын

Beautiful design and great detail in your video.... well done from Ireland!!!!!

@731Woodworks 4 жыл бұрын

Thank you for the kind words! Are you looking to build a dresser?

@snarfweasil 4 жыл бұрын

@@731Woodworks I have business making small pieces of furniture, home bars, toyboxes etc etc... i love watching videos like these for inspiration and opens my mind to new projects. thanks again.

@731Woodworks 4 жыл бұрын

Awesome! Thanks again

@LivingMyBestLifeIAm 2 жыл бұрын

I’m going to make some built-ins like this. I love the look of this simple modern design. My only suggestion is to perhaps use pin nails, as they leave a much more inconspicuous hole, that often doesn’t even need filling. Great job! ❤️🇨🇦

@thomasehesterjr 4 жыл бұрын

You do a great job.

@731Woodworks 4 жыл бұрын

Thank you. I appreciate that

@ThePowerOf762 3 жыл бұрын

Congrats, pretty good videos!!!

@731Woodworks 3 жыл бұрын

Thank you

@Ryan-zq7tx 2 жыл бұрын

Just a suggestion. When putting the drawers together use a 3" by 3" piece of quarter inch plywood to line up the grooves perfectly, the put in the pocket screws. Again, just a suggestion for accuracy

@Ryan-zq7tx 2 жыл бұрын

BTW. The dresser came out beautiful as do all your projects