How to make a Portable Thermoelectric Air Conditioner at Home

Рет қаралды 1,265,513

6 жыл бұрын

How to make Portable Thermoelectric Air Conditioner at Home
In this video i will show you how to make a portable thermoelectric air conditioner at home, in this project i have used thermoelectric device(peltier module) for cooling purpose
Material Used
1- 2 Peltier Module
ambaniurl.com/ZvZTMjcl
2- 2 DC CPU Fan
ambaniurl.com/nosU
3- 1 AC Exhaust Fan 2600rpm
ambaniurl.com/3NeQ
4- Thermal Compound
ambaniurl.com/xXtNdW
5- 2 Small Heat Sink
ambaniurl.com/6bceewAg
6- Styrofoam
7- Hardboard
8- 12V 5A 120W Supply
amzn.to/2J270Zw
#portablethermoelectricairconditioner #thermoelectric #airconditionerathome #thermoelectricairconditioner #peltieraircooler #scienceproject

Пікірлер: 402

@asmziauddinahmed1764 4 жыл бұрын

There are several mistakes in this video: (1) The box is not fully attached with the cooling part of the module. May be the warmer side can be cooled by it's own module! Really it's an innovative idea!!! (2) Power supply 12V 5A = 120 W. I think it need to be recalculated. (3) Exhaust Fan fitted in opposite direction. That is why module didn't work. So he heated the thermostat with a lighter to 50+ degrees and waited in an AC room till the temp. went down to 24 degrees and he immediately stopped the video. Good thinking!!!

@realvisionforever 11 ай бұрын

You're right. All fittings are wrong.

@americoguerreiro8114 5 жыл бұрын

It was very good, just want to give an idea, instead of connecting the tablets in parallel and connect in series, and a tablet is 6w and another 8w and instead of being two windows back and be only one with the two tablets stay on top one of another (tablets) will have a consumption instead of 9.9w goes to 3w and the temperature falls in parallel if it has 29 degrees in the environment descends to 13, but if it has in series with the same external temperature of 29 degrees there already but it will work well as well as with more consumption and less cooling.

@ImJuned09 5 жыл бұрын

this is why you should study thermodynamics. the room will only get hotter, its like keeping the refrigerator open to cool the room , it will never cool. will only get hotter.

@Synthematix 4 жыл бұрын

The hot side of the peltier should be directly exhausted out of a window, then this will work well.

@berniebernal 4 жыл бұрын

@@Synthematix You are correct about that

@parzival9639 4 жыл бұрын

I‘m trying to make a version of this where the hot heat sink is in a big container with cool water inside of it so the coolness is coming from the water and also ice if I put it in there... want to cool down a medium size room with it.. What do y’all think?

@ImJuned09 4 жыл бұрын

@@parzival9639 there are soo many things you are doing wrong. Firstly if u have that large amount of cold water. Just use that to cold to cool ur room . Why use the peltier module ? Second. You can't cool ur room with a peltier module it can't remove such large amounts of heat quickly . The heat entering ur room will always be greater than what ur removing with a peltier module. Also there is a limit upto which u can increase the temp difference between the two sides of a peltier module after that it fails . U can't keep making the hot side colder to remove heat there is a limit to it. 3.They are highly inefficient . If u are planning to connect multiple number of peltier modules to cool ur room. Just use a air-conditioner. It might be more efficient.

@parzival9639 4 жыл бұрын

Juned Mohamed thanks for answering! To your first point: I don’t really have a way to cool my room with the water because I don’t want to use evaporative cooling and blowing air onto a hatsink which is connected to the water doesn’t have that much of an effect... To your second point: my room is pretty well isolated, but my question (not retorical) is: If I can’t cool down my room with peltier modules, how can I? Because I’m essentially blowing air from a -5 degree celcius heat sink into my room... I don’t have anything that is colder than that so I would have to use a different technique but I don’t know of any other. To the third point: I want the cool side to be under freezing point, can I sustain that temp for a longer period of time? So effectively my question is: what should I do?

@sudharshan_reddy_kakarla 3 жыл бұрын

His room temp is so hot 😂😂🔥

@rafarizky7184 3 жыл бұрын

50°C😭

@dhansantv395 3 жыл бұрын

Haha 50c

@RolandoP 2 жыл бұрын

Probably heated up the sensor for a more dramatic effect.

@abdelghafourhalimi5708 2 жыл бұрын

His temperature room is 24 and he heat up the sensor to 50 so all its fake 😭

@isaaccano3438 2 жыл бұрын

50°C 😂

@sergioluis4213 2 жыл бұрын

el mejor uso que se le daria es en tu automovil ya que es un espacio pequeño cierto??

@hfbrother8485 5 жыл бұрын

1 hari tidur di kamar ente bisa mateng om.. 51.6° C ... Amazing 😁😁

@AdnanAli-ww1tp 4 жыл бұрын

I can understand your struggle for this urgent ac! 51c• not a joke

@user-wy8lz6zt9u 6 жыл бұрын

助かります！！

@souvikdey9178 5 жыл бұрын

from where u have got the Peltier module? it is the smart way to cool if designed properly.

@Synthematix 4 жыл бұрын

The hot side of the peltier should be directly exhausted out of a window, then this will work well.

@a_fading_shadow 2 жыл бұрын

yes the conservation of energy agrees or have the hot side water cooled with pc water cooling parts with the radiator outside (of your window or put it in another room) so heat is move out of ur room to the other.

@B18bVtec 6 жыл бұрын

Hey can you post the list of parts? The exact ones you used? This is the perfect size for what I want to do.. please.

@jeffreybagaoisan2019 4 жыл бұрын

Nice project👍..i will prefer to use 12V 10A or 12A. to suffice peltier in parallel. 10A @ 12V will produce 120W.

@Still_Pankaj 2 жыл бұрын

Sir aapki mehnat ke liye like + subscribe to banta hai 55°c room temperature 🌡️🥵hai tab bhi aapne itni mehnat karke video banai kya bolti hai audience like +subscribe karo jaldi‼️

@YK05011967 5 жыл бұрын

Умняш! Ты спас галактику!

@rubenalbertojimenezsosa457 4 жыл бұрын

Hello, can you tell me what is the name of that box that you used to connect the little ones? Please

@gilbertodesouza927 5 жыл бұрын

AMIGO SOU TEC...EM ELETRONICA E ELETROTEC...FIQUEI CURIOSO QUANTOS GRAU DO FRIO DA NESSE TEU TEMOMITRO QUE EU NÃO VI.ÓTIMO ESSE TEU PROJETO...

@RohitSingh-ri2vm 3 жыл бұрын

Wowe, great video, thats how u measure the temperature and not like those people who place the temp. Sensor direclty on peltier...

@lynvingen 5 жыл бұрын

Fun project! However, this wouldn't work at all unless you move the heat collected from the Peltiers to another area isolated from the volume you try to cool down. As shown, this design will only work as a heater, essentially. Another thing I noticed was the direct connection of the hot side with cold side with screws. I would also dare you to make this using no glue at all.

@arjuna4730 Жыл бұрын

Agreed, he is adding more energy into the system. Room's average temperature should increase.

@Gettheitem 5 жыл бұрын

สวัสดีครับแอดมิน อยากจะขอสอบถามว่า ชุดเครื่องปรับอากาศแบบที่ทำในคลิปนี้กินไฟต่อชั่วโมงมากน้่อยแค่ไหนครับ ผมสนใจอยากลองทำมาใช้ดูแต่กลัวไม่คั้มค่าไฟเพราะอยู่หอพัก

@neelamashah 3 жыл бұрын

Amazing, I was looking for a cheap way of making the ac and a convenient manner ,could u please tell the room tempreture

@gilbertodesouza927 5 жыл бұрын

esse foi uns dos melhores projetos de ar condicionado que vi até agora prarabens para o sei idealizaDOR...

@aliasgher6672 5 жыл бұрын

Nice amezing

@marcoshenriqueqrafebrinha8731 3 жыл бұрын

Isso era pra ser um ar condicionado???

@inakyrdz8518 12 күн бұрын

estan al reves, el ventilador segun la posicion de las celdas esa parte da el calor y la otra da el frio..........

@dronesuite9282 3 жыл бұрын

C'est bien pour un rafraichisseur personnel après tu ne va pas refroidir une pièces car les modules dégage autant de chaleur qu'il n'en absorbe, il faudrait un module de watercooling avec la partie chaud en extérieur.

@fabiomauricio284 5 жыл бұрын

Pero por donde sale el aire frío?? Si el cooler de adelante tira aire para dentro de la caja. O sea que es una heladerita

@m.plus.2705 5 жыл бұрын

Gostaria de comprar um porem e preciso alguma indústria fabricar o mesmo de forma a disponibiliza-lo comercialmente seria um sucesso de vendas

@stektirade 5 жыл бұрын

do you think you could make a 700 btu air conditioner using tec?

@medoganem964 4 жыл бұрын

لو سمحت شو اسم القطعه المبردة ومن وين بقدر احصل عليها

@pampambhesie7149 5 жыл бұрын

if the big heat sink is exhaust will i use also a big heat sink in the other side to make it more cooler????

@okthanks917 5 жыл бұрын

ชุดทำความเย็นแพงไหมแบบนี้

@alexsibomana4325 3 жыл бұрын

Wow that's good thing I need more information about it

@rikujkoivisto 3 жыл бұрын

I WONDER, WHERE DID HE BUILD THIS ODD "WHATEVER"?? TEMP WAS 51C.!??! IN SAUNA? NORM ROOM TEMP IS ~19-23C. IN THE END TEMP WAS ~30C.!! 😅😅😅

@JuanGarcia-co7zw 5 жыл бұрын

Great home made portable air conditioner I would buy one

@juanabrams2300 2 жыл бұрын

Esa cosita cuadrada eso enfría oh ay que ponerlo en el freezer para entonces poner al aire acondicionado eso enfría sin tener que ponerlo en el freezer?

@idknow09 6 жыл бұрын

goood effort gais

@anandverma9796 5 жыл бұрын

Sir large and small heat silk kya kam karta hai iski prise kya hai.yah kaha milta hai and peltier module ac nahi hota hai?

@pushkarraj6297 5 жыл бұрын

Should it install like big window AC in which back side is outside of room... Coz peltier too is hot on back side.. from front it blows cool air and from back it blows hot air... How room become cooler?? Plz let me know the how to install it?

@demef758 3 жыл бұрын

Yep. These videos claiming to make an A/C box with no venting of the heat pumped OUT of the room air are all BS.

@billlymolinos7843 4 жыл бұрын

For how many hours or how long can you use this airconditioner continuesly?

@34gw68 6 жыл бұрын

Gooood!!!👍👍

@Mr_Hacksaw 6 жыл бұрын

Thanks

@rafaeldomingues8876 5 жыл бұрын

Gostei do seu projeto, bem interessante.

@nandang5034 5 жыл бұрын

pak. mau tanya. heatsinknya dingin. tapi tidak ngefek ke kulkasnya itu

@Beta-sw3tw 6 жыл бұрын

NICEEEE

@boobam3648 4 жыл бұрын

i love this song. i have it playing all the time.

@AnesioRocha-Houston-Texas 5 жыл бұрын

Finished at 24.4 Celsius degrees !! This is not cold !!! 24.4C and equal to 76F

@mayyouprosper8140 4 жыл бұрын

Dayyyyyymmmmm you made a heater

@jay-uo2bi 5 жыл бұрын

5a psu is not enough especially if you have x2 tec1-12706 which use 6 am and u have to say you really want 15-20 amp psu.

@1959marcal 5 жыл бұрын

Quisiera saber si ese aire sera capaz de climatizar por ejemplo un area de 4 metros cuadrados?

@Hector.Michinaux Жыл бұрын

como el amigo no responde no me voy a suscribir

@swimwithcoachraven1532 5 жыл бұрын

Wonder how are going to get rid of the water condensation

@sasi1641 2 жыл бұрын

Hi bro can i direct connect to current

@sahilshaikh6202 6 жыл бұрын

Bhai ye Hawa deta he acchi aur thandi deta he and zyada powerfull banana ho to kya Kar sakte he

@AsdQwe-wp1pn 3 жыл бұрын

اخي قصدك محولة كهرباء مال الشبكة الوطنية ولا ايه

@rupeshnarania4620 6 жыл бұрын

wonderful

@Mr_Hacksaw 6 жыл бұрын

Thank you

@warf-oc9yz 5 жыл бұрын

I hate it when they upload a interesting vid and then do not tell what they are doing . They just say here look at this, I am realy smart, now you try to figure out what I did.

@franciscoordonez3795 Жыл бұрын

Cómo puedo localizarte para comprarte uno

@ProjectsProducts 6 жыл бұрын

Nice idea...

@amauriandrade84 6 жыл бұрын

Buen proyecto pero tienes que colocar una entrada de aire al espacio frio de la caja, porque no lograras enfriar nada, creas un vació con el ventilador dentro de la caja y no fuerzas a que entre aire nuevo para ir enfriandolo, así no tendrá el efecto deseado y se que es demostrativo pero ahora habrá que colocarlo en una ventana para dejar el lado de calor aislado del espacio a enfriar. Pienso que es mejor colocar un disipador de forma de trampa para que el aire entrante se ha forzado por el ventilador frontal ha atravesarlo y así enfriarse mientras lo hace.

@edscac5891 Жыл бұрын

Acabo de fabricar uno con dos celdas le puse unas placas de aluminio para que el aire que entre atraviese por el camino entre cada placa que van unidas al disipador puse un ventilador a la entrada otro a mitad y uno a la salida lo usaré para enfriar terrarios de 1.5 m x 60cm x 50 cm para serpientes de montaña en temporada de brumacion para bajar más la temperatura en tiempo de invierno y para ese uso va bien pero para enfriar una habitación no sirve ni siquiera sacando el lado caliente del cuarto por qué solo baja la temperatura 5o6 grados a la salida

@VedatKaraata 5 жыл бұрын

Kaç watt güç harcıyor ortalama

@MrKhoa-bj8it Жыл бұрын

what a smart idea

@khushbusadhu4737 5 жыл бұрын

Mind blowing 👌

@jkvideos6826 5 жыл бұрын

The air Vent needs to be re designed for more efficient cooling and reduce the strain on thermacol while sucking air in and expel it outside in the back.

@Swenser 5 жыл бұрын

cut up some aluminium cans and jam in slots on heatsink to increase fin size and maximise air to cold surface contact area just like a real AC uses an evaporator. Also, water cooling hot side works better with salted water.

@danieljohansen3217 5 жыл бұрын

David Ujcic o

@indigodragon7129 5 жыл бұрын

Try this, mini cryogenic stirling piston. 2 1/2 copper pipe bent into a coil. Coil filled with gallium aluminum scandium alloy then end cap sweated on sealing on end off copoer coil. A copper sleave inserted and sealed into one end of copper coil to insert mini cryogenic stirling piston. Get a large cooler place a hole in the lid close to one edge. Place the other hole on the bityom side of cooler. Make riser and secure blower motor and mini cryogenic stirling piston to riser leaving an area bellow for condensation that you can use the coolers drain plug to drain. Then use foamed aluminum panels to line the inside and make a holder for the large copper coil and duct the air flow to pass through the coil then cooled air forced out PVC elbow on the lid that you can swivel. Add thermostat to switch off blower fan in order for the mini cryogenic stirling piston to super cool tge large copper coil . A 24 volt air conditioning system. 😊😉

@AlanBickham 5 жыл бұрын

Interesting, would like to know more, any suggested links?

@maniteja332 5 жыл бұрын

Even I would like to know more about it !!

@todoscontraelnom.5924 4 жыл бұрын

Eso en realidad no enfría una habitación . Si piensa que la célula peltier por un lado enfría y por el otro se calienta y si esta tirando el aire frío y caliente dentro de la misma habitación esta se mantendrá a la misma temperatura. Para que funcionara tendría que sacar el aire caliente fuera de la habitación .

@fernandobecker3361 2 жыл бұрын

lo pones en una ventana y listo pa te ahorras discutir al pedo

@todoscontraelnom.5924 2 жыл бұрын

@@fernandobecker3361 osea que la solución es decirle póngalo en la ventana y listo . y el porque? y el argumento ? y el razonamiento ? yo solo le digo porque no funcionaria su invento . y el dirá si tengo o no razón . y después tendrá que buscar la solución a ese problema . es eso lo que hace que se desarrolle el pensamiento las ideas y no dar una orden y ya .

@sensdaelectronicschan6086 4 жыл бұрын

We can supplier the high efficiency peltier module

@myominnyunt6798 4 жыл бұрын

Good

@akayankhanak7403 4 жыл бұрын

mujhe ye bna bnaya chaiye body nahi prise btaiye

@anilsahu-ny6dk 5 жыл бұрын

Please help me make a music pad roland 20x for my project please please

@mochsamsudin561 3 жыл бұрын

gabus nya apa ga meleleh boss

@lukeoneill5987 3 ай бұрын

Really sorry to be picky. But Mr hacksaw's logo is a wood saw. Not a hacksaw.. lol

@chickenchannel506 2 жыл бұрын

ถ้าทำแบบนี้เล้วเอาไปเป่า พวกบอร์ดอิเล็กทรอลิก จะมีผลเสียไม๊ หรือว่ามันมีความชื่้นมากว่าแอร์เยอะครับ

@GodGladiator1 4 жыл бұрын

you are pulling in heat off of the hot side of the peltier modules since it in not insulated.

@A.Samraj 2 жыл бұрын

Nice..,but it can be possible to run continually..,

@KingMinhvuong 6 жыл бұрын

so cool bro

@Mr_Hacksaw 6 жыл бұрын

Thanks

@claraschool207 3 жыл бұрын

sertakan link untuk beli alat2nya donk..

@anamariafreire1415 5 жыл бұрын

Yo lo hice con cuatro peltier 12706 y aunque funciona, no enfría, creo que logré un calefactor porque las peltier calientan mucho . puse disispadores y coolers pero sólo tira aire caliente, frío nada

@gomezloaiza753 2 жыл бұрын

con uno seria mas que suficiente para que la parte de enfriar sea mas eficiente y la parte de calentar solo seria un disipador y un cooler saludos

@deepakrawat8153 5 жыл бұрын

Power supply you wrote 120 watt, 5 amp. I think it should be 10 Amp. Which peltier did you use?

@Mr_Hacksaw 5 жыл бұрын

There are two 12V 5A supply hence 12x5x2 = 120W , Each Peltier consumes 12V 5A and 2 Peltier module are used🙂

@erdogancivelek5457 3 жыл бұрын

Kaç derece faydası oluyor

@anmoltrivedi2083 6 жыл бұрын

👍🏻

@danilomendoza8763 6 жыл бұрын

anmol trivedi no

@joseapolo9424 2 жыл бұрын

creo que deberias colocar el ventilador para que saque el frio de la celda. colocaste mal el ventilador.

@natin9133 5 жыл бұрын

this doesnt work the heat the tec generates at the other side just dumps back into your room

@demef758 3 жыл бұрын

Yep. Net loss in the whole system if all you're doing is pumping MORE heat out the back than the cold that you are creating in front. Stand back a few feet from this thing, and you will feel that the room is getting hotter, not cooler.

@sudharshan_reddy_kakarla 3 жыл бұрын

Keep it at the window. Hot at outside the room And Cool side at your room U noob😂😂

@techandunbox_ 3 жыл бұрын

You need to put a pipe for hot air outside the room Then it will work

@otomotifiiwinanto 3 жыл бұрын

I like this

@kanhaiyasharma4564 4 жыл бұрын

Peltier part kha milenge

@wildstyle42 6 жыл бұрын

24 degrees C is still way too hot if it was near enough 16 then I'd be impressed

@user-rd2gw3mt4p 4 жыл бұрын

البليتر دا بقا فين واسمو ايه فى مصر

@uniquechannel9310 Жыл бұрын

Please tell about the costing of all items used

@andrescantillo5243 4 жыл бұрын

me imagino que esos 50 grados es de la parte que se calienta?

@vatamancoco 3 жыл бұрын

no es que el tipo viven en un volcán

@wilsonbermudezflores495 11 ай бұрын

How hot is in exhausto side

@freefranz2452 6 жыл бұрын

First track's name?

@12vLife 4 жыл бұрын

Can the body of van be the heat sink?. I'm in a small cargo van that has two large fans (one inbound in the front and another the outbound in the back). Ventilation is great and it very small space (like

@apedfish8374 3 жыл бұрын

Did you ever try this out? How did it go? I'm trying to figure out how to make a mini air conditioner that will run on solar...but not evaporative cooler...they dont pass the test and take up precious water when off grid

@12vLife 3 жыл бұрын

@@apedfish8374 Hi..I found land in florida that is cool at night even in august. Learned to sleep w a 12v roof fan. I want test geothermal cooling of a small space. In my van I just run the engine for an hour with ac blasting before bed. This serves two purposes.. cools the van. Tops my battery. I'm waiting for Ev vans that can run ac overnight.

@apedfish8374 3 жыл бұрын

@@12vLife glad you found a way to survive the heat 🙌 Im looking at these very small air conditioners that are coming out on the market now like zero breeze but they are expensive.

@12vLife 2 жыл бұрын

@@apedfish8374 I've never heard anybody real say zerobreeze works.

@apedfish8374 2 жыл бұрын

@@12vLife darnit yea that would be too expensive to find out it didn't work. I actually started thinking about trying to make my own air conditioner but thats just because my dad is an engineer so I have inherited that inquisitiveness but not the actual ability. That's how I ended up looking at this video to see what kind of air conditioners exist. However, I can't imagine that anything I could make would work any better than the zero breeze so back to square one.

@jackm6307 6 жыл бұрын

What was the ambient temperature? Without that, we have no idea how well it works.

@agytanggagita427 6 жыл бұрын

Jack m the experiment at Sahara desert 😅😅😅😅

@arnaldofernandes9952 5 жыл бұрын

Interessante. interesting.

@leegenix 6 жыл бұрын

I am confused. The large fan was sucking in air, yet it was getting cooler. Shouldn't the large fan be blowing cool air, Out?

@jay-uo2bi 5 жыл бұрын

No? It is blowing out.

@rolandogallardo395 5 жыл бұрын

Why are those thing going in the opposite direction if it was blowing out air?

@dreamsquad6161 5 жыл бұрын

Yep it was sucking in

@salemsari 5 жыл бұрын

right it's sucking the air in 🤦‍♂️

@sebbeuar7752 3 жыл бұрын

sper, le chaud et le froid se mélangent avant d arriver dans la boite, ca ne peut pas marcher

@moizeus7756 5 жыл бұрын

Bonjour faudrait pas oublier le dégagement de chaleur des pelletiers preuve leurs consommation ! énergivore

@mahipalsingh.dhunna.9785 3 жыл бұрын

Idea is good but back side hot air take back side add box hot air back.. In box aid boss pipe out if window and put sumal fan ri out air it me me a.c

@albertwesker4266 Жыл бұрын

this project wont work... rads from peltiers arent fully inside styrofoam box... most of cold and moisture are coming outside - see 6:23 this is major flaw