How to Make a Raised Panel Door with Hand Tools - Part 2 (Making the Raised Panel)

Рет қаралды 22,520

10 жыл бұрын

This episode originally aired on January 25, 2013.
On today's show I finish up the work on the frame and panel doors for the entertainment center. These doors are lipped, meaning they are partially inset and partially overlay, and they also have a molding planed on the inside and outside edges of the rails and stiles. The solid wood panel in the outer doors is bookmatched, fielded and raised. The center doors have glass panels. In Part 2, I'll discuss how the fielded and raised panel is made, and complete the lip and outer molding on the assembled door.

Пікірлер: 31

@user-ik6cb1fp7v 9 ай бұрын

Again an outstanding video. No fuss, no posing, just to the point. Very informative, very helpful, a joy to watch. Thank you Bob!

@Control-Freak 8 ай бұрын

I love hand tool woodworking. I have made a panel razing plane already so I am glad I found this. Great work!

@stevefowler3398 2 жыл бұрын

The yt algo brought me here from PAUL SELLERS CHANNEL. You are as briiant as he. Traditional craftsmanship, using traditional tools, with traditional attention to detail. Love it. Cheers.

@BobRozaieskiFineWoodworking 2 жыл бұрын

Many thanks! And welcome!

@j.r.tidwell3318 2 жыл бұрын

BROTHER THIS VIDEO WAS GREAT. THE WAY YOU TEACH WHILE WORKING WAS 👍 UP. I LEARNED MORE IN 15 MINUTES THEN 6 MONTHS ON MY OWN.. THANKS 🙏

@BobRozaieskiFineWoodworking 2 жыл бұрын

Thank you!

@user-np7pq2gy1v 3 жыл бұрын

Wow. It would take me the rest of my life to make this. Such skill and patience.

@vincentfaure4472 Жыл бұрын

Hello Bob. Your videos are very interesting, extremely informative and presented with great humility. Thanks a lot. Bravo Monsieur! Vincent from France

@738polarbear 3 жыл бұрын

Very very skilled woodwor er . You can learn a lot here.

@orcasea59 6 жыл бұрын

Very nice! Thank you. Subscribed!

@mitchell47hitman75 4 жыл бұрын

Wow ive never seen anything like dis awesome....😎 may god bless you with more n more ideas

@stevefowler3398 2 жыл бұрын

I did mention PAUL SELLERS. He is another fantastic old school craftsman. I think you might enjoy him also. He has that same, assured, quiet attention to detail

@mwrcrft 3 жыл бұрын

Thanks Bob

@timbarry5080 2 жыл бұрын

I half expected to see a homemade framing square

@willxin4517 6 жыл бұрын

Thanks for posting this two parter. Not many people are doing 100% detailed and annotated videos of traditional methods.

@anventuri 6 жыл бұрын

Awesome job... one question: can you see with that light?

@garmoetchanelajjah6484 3 жыл бұрын

Goood jobbbb.!

@michaelfling7786 6 жыл бұрын

Nice work Bob. What is the width of your tapered edge, from the field to the edge of the panel?

@BobRozaieskiFineWoodworking 6 жыл бұрын

Michael Fling Thanks! I think it was roughly 1-¼” wide.

@timbarry5080 2 жыл бұрын

Wow.

@IAmPraki 4 жыл бұрын

Bob, unless I am mistaken, it looks like the sloping edges of the panel are inserted into the grooves. I am wondering how that plays with seasonal wood movement. Unlike flat edges, these sloping edges might potentially split the grooves, no? Or, am I overthinking this? Thanks for your videos, BTW. I really dig them :)

@BobRozaieskiFineWoodworking 4 жыл бұрын

I wouldn’t say that you’re over thinking it, but for the most part it’s not a problem. The panel shouldn’t be a super tight fit so there’s enough room for the minimal movement that it should see. Additionally, the fit at the time of assembly will depend on when it’s built and whether the panel is expected to shrink or expand. For the most part, this is how raised panels were made for hundreds of years before machinery and I’ve yet to see a split door frame in an antique. So if it works for thousands of antiques, it works for me too 😉.

@masone4718 Жыл бұрын

@@BobRozaieskiFineWoodworking I’m 2 years late to the party, but I was taught that with a full-sized tenon, as opposed to a stub tenon à la cope-and-stick, the frame is strong enough to resist any expansion from the panel.

@HWoodCreations Жыл бұрын

I know this is an older video, but if I'm understanding correctly....you leave the depth gauge riding on the raised panel, so it doesn't cutting any deeper at the raised portion, correct? And then, since you've eased the fence out slightly, gravity pretty much does the work as work the plane down to your line. is that correct? Thank you for the videos. You're providing a wealth of knowledge.

@BobRozaieskiFineWoodworking Жыл бұрын

I honestly don’t remember what I did on this particular piece, but I typically only use the depth stop for the initial field/rabbet. Once I switch to planing the bevel, the depth stop isn’t used. I just work by eye.

@HWoodCreations Жыл бұрын

@@BobRozaieskiFineWoodworking I gotcha. Thank you for the response

@martincote9184 5 жыл бұрын

Which is the name of the tool you used for making the panels?

@BobRozaieskiFineWoodworking 5 жыл бұрын

Martin Garcia The plane is called a moving fillester plane or a fenced rabbet plane.

@user-jv5ve4nv4d 4 жыл бұрын

You cool

@tonyennis3008 5 жыл бұрын

14:38 If you don't have one, then screw a temporary fence to your skew rabbit.

@dylanneely91 3 жыл бұрын

Or make a fillister plane and swap the iron between. Saves a possibly valued plane from hamfistedness. Or stick screws in your plane, it would work and save a ton of time.