HOW TO MAKE A VERY CHEAP SCREEN MESH STRETCHER

No video

HOW TO MAKE A VERY CHEAP SCREEN MESH STRETCHER

Рет қаралды 78,069

Күн бұрын

This device was made June 2019. On 12 Sept 2020, I further modified this device to make stretching work a lot easier and faster. Please see my other video for details. I consider that as one of the fastest and easiest Screen Stretching device....please subscribe, share and like my videos..Thanks a lot!!!
For business inquiries - contact: alex_navallo@yahoo.com

Пікірлер: 80

@ScreenPrintingforFunandProfit 3 жыл бұрын

kzfaq.info/get/bejne/odB_dqiZsriZgJc.html This is my latest modification of my screen stretcher based on this device.

@dbestp1064 4 жыл бұрын

This is indeed one of the best screen stretchers ever invented.

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@peculiarone2278 3 жыл бұрын

Agree

@excellentgraphics8414 5 жыл бұрын

Wow! It worked perfectly 100%. I used an aluminum flat frame with a fast drying super glue to pre-attach the mesh on it. I then turned it outside down unto the original frame and clamped it down using four pieces of 1 inch C-clamps on all the four sides to stretch. So far so good, this is the best , simplest and low budget screen stretching manual device technology I have ever seen from all the DIY screen stretching tutorials. Thanks and I hope you will try it also because you don't have to use the nails to grip the mesh. Just your super glue ,your aluminium or wooden frame, a piece of flat board cut to size and clamps. Thank you for your idea.

@ScreenPrintingforFunandProfit 5 жыл бұрын

I am happy that i have helped you make your job easier. Good luck to you my friend. God Bless!!!

@excellentgraphics8414 5 жыл бұрын

To you also, God bless you in all your endeavor and many thanks.

@Factory928AC 4 жыл бұрын

Can you make a video of yours?

@powertothepeople4712 6 ай бұрын

I'm trying that too. Geniuses!

@excellentgraphics8414 5 жыл бұрын

You are not a poor man, you are very rich with technical innovations and ideas. Well I also use 'the nail bar stretcher' at my Art Shop in Ghana. I am going to try this also. I have got an idea from yours, to use an aluminium flat square frame of a required size with fast drying super glue to glue the mesh in place, before I screw or clamp it down to the original frame to obtain the tension by using small G - clamps.Thank you for this idea! Man you are very rich!

@roshannazareth3461 4 жыл бұрын

You can make metal strecher by your own with the help of welders... I made one.. Much easier to stretch

@print-artgraphics5473 3 жыл бұрын

Just as simple as that. That is my tool for work. Saved a lot of cash for a delicious dinner. And thank you for this idea.

@ScreenPrintingforFunandProfit 3 жыл бұрын

Thanks for appreciating my innovation and that you benefited from it. I will be glad if you can subscribe in my channel. Thanks a lot.

@machiox9951 3 жыл бұрын

I've looked at other video for a DIY screen stretcher and this one is the best. 👍👍

@dannmorales7559 4 жыл бұрын

Been looking for DIY screen stretchers dto sa atin. This one is the most cost effective one. I'll make one myself probably using kilndry wood for the frame. Galing mo kuya! Salamat po ng marami sa idea!

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@yourunclesam6780 4 жыл бұрын

Realy fantastic idea.Realy I like it this project.Thank you for your invention.

@dawggs 4 жыл бұрын

ONE OF THE BEST INNOVATION OF STRETCHING! KUDOS SIR!

@ScreenPrintingforFunandProfit 4 жыл бұрын

Thanks! I hope I have helped you even in a very little way. Tools available in the market are expensive for hobbyist and I want to make use of the cheapest we can afford.

@lynnhouts9677 5 жыл бұрын

I have drawn out a plan and have ordered the mesh. I’m going to make this very soon!

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@peculiarone2278 3 жыл бұрын

Wow. Amazimg...this is the easiest and fastest way. Good job sir

@boxingforfitness1221 4 жыл бұрын

WOW!! VERY INNOVATIVE!! THANK YOU! I SUBSCRIBED!

@ninjalex3749 3 жыл бұрын

Thanks for subscribing! I hope it helped you a lot.

@kokeskokeskokes 3 жыл бұрын

I can't wait to sleep on one of these.

@vidneypopples 5 жыл бұрын

This is brilliant. Well conceived & simple. I am making my own at the moment with a slight variation, rather than holes in the base I'm going to make a groove. I figured that it would work the same but be more forgiving as my nails aren't in very straight lines. Again thanks for your genius idea.

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@lynnhouts9677 5 жыл бұрын

I have been looking at many mesh stretchers....and I like yours. I will have to do some mods to mine as I’m doing screens for my yudu screen printer they are thin metal frames, very thin. But I like what you have come up with! 👏👏👏👏👏👏

@ScreenPrintingforFunandProfit 5 жыл бұрын

Thanks Ms. Lynn Houts. My frames are also thin since I am using ply boards ever since. I am making a lot of screen frames coz I am planning to have my own clothing line. I am also assembling the frames on this small table using wood glue and stapler. I am also doing all my screen printing devices being an avid DIYer. Thanks for appreciating my idea. Happy printing!!!

@mamdouhabdelrahman5035 8 ай бұрын

Excelente 👌

@lesliehowells 4 жыл бұрын

Ingenius! Thank you for sharing!

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@ScreenPrintingforFunandProfit 5 жыл бұрын

Wing nuts can also be used in this device, but in so doing, the bolt must be fixed underneath, and it will always be protruding in the frame, hence, it can disturb the operation. It's better to modify a timber knob with bolt and a fixed T-nut underneath for easy tightening, rather than wing nuts which is hard to turn specially on the final stage when there is already a tension on turning the nuts.

@user-yy2lg8ci1o 5 ай бұрын

Very good vidio

@johanherein6956 2 жыл бұрын

Very good!

@powertothepeople4712 6 ай бұрын

Genuis!!!

@eternalpassionandwhatever7147 4 жыл бұрын

Ang galing galing naman nito ...thank you

@ninjalex3749 3 жыл бұрын

Thanks a lot for appreciating.

@corneliotaganna2386 2 жыл бұрын

Nice bro,,, 👍⭐

@BxadleyAbused 4 жыл бұрын

This is super clever

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@danialm8122 4 жыл бұрын

Amazing bro.. nice work..!!

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@silkmaster3540 3 жыл бұрын

Muito boa essa tecnica.

@marcclintonkenmegneatabong2028 2 жыл бұрын

Awesome🌋

@amirsakhraoui9218 4 жыл бұрын

awesome !

@ScreenPrintingforFunandProfit 4 жыл бұрын

Thanks and pls subscribe, new videos will come out.

@alphagraphix6098 4 жыл бұрын

I'll have to try this amazing tool! It's great and I love it. Can you give me your permission to build one formy small studio here in Bomet Kenya?

@ScreenPrintingforFunandProfit 4 жыл бұрын

Go ahead and build one for your own use. I wish for your success in screen printing.

@alphagraphix6098 4 жыл бұрын

@@ScreenPrintingforFunandProfit thanks so much and may God bless you abundantly wherever you are in this world.

@paulcamana9916 3 жыл бұрын

Simple but effective, nice.

@ninjalex3749 3 жыл бұрын

Thanks, I am glad you appreciated my idea.

@rodanegordon1619 Жыл бұрын

Brilliant!!

@marlonumali690 3 жыл бұрын

Hello to you, very informative

@jungsomewhat 4 жыл бұрын

Very good thank you

@tohfu22 Жыл бұрын

this is just for waterbase right?

@MrRYELLE 4 жыл бұрын

Thank you for sharing!

@ninjalex3749 3 жыл бұрын

Thanks! Glad you appreciate it.

@peculiarone2278 3 жыл бұрын

New subscriber here. Good job sir

@ninjalex3749 3 жыл бұрын

Thanks a lot for your subscription.. greatly appreciated!

@abdulhannan3358 4 жыл бұрын

Wow

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@dankevinsanchez7673 5 жыл бұрын

how many newtons it can reach with your stretcher sir?

@ScreenPrintingforFunandProfit 4 жыл бұрын

Sorry, i don't have a device to measure the tension. It however gave me the best tension I have done manually. And the best looking frame i did with the use of adhesive, it gave me even tension all around the perimeter of the frame. ⁷

@jungsomewhat 4 жыл бұрын

@@ScreenPrintingforFunandProfit s

@hakank3841 3 жыл бұрын

hello is that also work for pcb?

@royceschmidt8765 4 жыл бұрын

Thanks for your video.... I have made this and tried a few screens.....But my mesh keeps ripping...I will try again on another day....

@ScreenPrintingforFunandProfit 4 жыл бұрын

thanks and pls subscribe, new videos will come out.

@ninjalex3749 3 жыл бұрын

Maybe you can make a rounded corner so that it wont rip the screen..

@royceschmidt8765 3 жыл бұрын

@@ninjalex3749 I routered a groove in my outer frame and glued a 1/2" dowel in place.....When the 2 sides are clamped together it holds the screen tight while I stretch it.....Works pretty good....

@ScarffArtChannel 2 жыл бұрын

@@royceschmidt8765 can you show us? I'm having tearing issues with the nails.

@ScarffArtChannel 2 жыл бұрын

My screens are ripping too from the nails.

@titolove7677 4 жыл бұрын

Cool what glue you used

@ScreenPrintingforFunandProfit 4 жыл бұрын

Just rugby. then I support it with few staple wires. I only remove the screen frame when it is already dry so that there will be no movement on the mesh.

@ScreenPrintingforFunandProfit 5 жыл бұрын

This is a very cheap innovation which almost cost me nothing except for the M8 knobs I bought online, which I still have to modify since it comes from China with different size and it does not fit our Philippine made M8 bolts.