Out of all the "homemade" truck bed cover videos on KZfaq this is by far the best one. I will be buying the vinyl from your website, thank you

Very nice videos! I have to say that when using any kind of drill your hair needs to be tied back. this is a must! I was working in a shop and my friends hair got caught in the spinning chuck! he held on so tight the he could not let go of the trigger! needless to say we called him patch for the couple months... the shorter the bit the more control... body shop supplies have short double end drill bits for drilling into car panels. looking forward to your next video!!!

A very nice, straight forward video with good narration. Thanks!

Hey Amanda, that was awesome. Thanks for the video, great work!!!!

i watched some videos which were featuring ply wood and such ..oh man i m a woman and i felt the pain of lifting and carrying and painting and uuuff got tired lol...but what you have done is more simple, practical and doable without exhausting myself. i need to save my energy to pick up my kayak and taking it in and out not lifting up wood... thank you!

i did the same thing but when it rained the weight of the water gathered on the vinyl and I had ponding and it stretched the vinyl. the solution was to use 4 pieces of electrical conduit that was hammered flat at the ends where it rested on the truck and it lay across the truck and helped shed the ponding water. Also the snaps were hard to put on in the winter as the vinyl got cold and shrank.

You did a great young lady, thanks for sharing and keep the fun videos coming. I am waiting on my second order from your company, excited. We will be posting some videos of what we are making using your waxed canvas in the next month or so. We have some stuff we will be posting with the first canvas order we placed with y'all soon as well. Thanks again and have a blessed week. Keep up the fun videos. dale.

FYI. if your needles tend to drag ,use a piece of chalk to run down the seam or dust with talcum powder or baby powder.keeps needles moving smooth my.

The walking foot machine helps too. We built hundreds of covers for cars,trucks and boats and aircraft when I was in the Navy.

Thank you. I’m was thinking about doing this for a trailer cover

Great video !!!!!!!! Very helpful for an amazing finish!

This was a really well done video. Thank you very much. My husband just bought himself a new truck (even though his other one was fine and mine has been waiting to get fixed for almost a year😤) anyways the last thing he needs to do is spend another $1,200 on something.

WOW,,, that looks great I've got a white 97 ford ranger that I'm looking to do the same thing. and this is a perfect video great work

Great vid , makes it look really easy to create for instance a bimini for a boat

Well done. Not sure I would drill holes in my truck. But good work on cover.

nice work

I was wondering about rain getting in. maybe some wya to attach foam strip to the cover? or take the cover over the edges. Just now figured it out! Add an extra stip of canvas attached to cover, that hangs down over the side and sticks with magnets? that might work! nice video. I hate leaving groceries in the bed while I go do something else.

Great job.

Good job

very nice well made thanks

Great video! Can a regular sewing machine sew this material?

good job

You did a fewaking amazing job 👏

I LOVE IT !!!!!!!!!!!! I want one but o suck i stiching and i suck with working with vinyl im good at making holes

would you be able to post a link of the caps kit? im trying to do this just want to make sure I get everything I need

GREAT vid! il DEFO be doing this for my L200, Thumbs up from the UK!!! :D

I have to say that your cover looks absolutely fantastic! when you drilled those holes though I cringed. I would have used some flashing or something similar and used the post mount holes in the bed to mount by. you wouldn't have to damage anything that way. I have a classic...no way I'm drilling. Those sewing skills are serious though.

Nice project

how far apart did you put the snaps to make it tight also can I use bonded nylon thread 69 on brothers 6000i sewing machine? and do you have a link to the thread and snaps?

use a center punch to dimple the spot you're planning to drill. it'll prevent the bit from wandering.

This looks great for $64, wow!

That came out clean

My truck Chevy Silverado bed is 64” Wide Plus I want to fold it a bit so I would need something over 64” wide pls let me know if u have anything available for that size pls thanks

Been to your website , but I can't figure out what type of material to look for?

Great Job.paint the holes with some rust paint or even fingernail polish before you put the screws in ( while it's still wet) so the truck won't rust out. also put some hoops from side to side so the water will run off and not puddle.

hello, I have been looking for a decent, affordable tonneau cover for my Ram when i stumbled onto your video. i went to the site you posted and see the vinyl material is listed with dimensions of 61" x 36". Being that a truck's bed is wider than 36", did you have to sew 2 pieces of the material together? Thanks

Wait do u offer custom size snap covers cuz i have a 1935 bed im looking for a cover

Like that clean look. Have you seen any stretching or tension issues over time, now? Any issues from say, a big snow dump or pooled rain on top of the canvas, or snaps that no longer stay tight?

Great idea and looks good too i think better than factory covers but having to drill those ones in body panel is not what everyone want to do

Dang this makes me wanna make my own..

How does this keep rain out when driving ? Some type of gasket??

i like your idea can i use it ?

Could you tell me where to buy all the material?

I love it! How much would one be, for a Ford Ranger?

Can you make one of these with some height? My husband & I love your design- exactly what we are looking for but he wants height.

Is there another way other than drilling holes in the truck?

how does this do in 65+ mph speeds on the freeways?

Where can I order this stuff at ?

Is the 18oz/61" vinyl on your website the same one used in this video?

thank u for posting this! great!

Wow 😮 wish I could get you to do this to my truck 😞

Use masking tape next before drilling on paint work after the holes are drilled remove masking tape.

what's the hardware called on eBay?? I'm looking and I can't find it. plz help

Please what's the name of the snap you bought on eBay.... can't find it on ebay

How waterproof is this? Would love to see some paper towels put in the bed then attack the bed with a garden hose. Good make!

Where did you get the snaps from? I could not find them on your site.

Am confused it says 18 OZ/61" on the website, it says the width is 61 inches but how long is it? is it 61 inches long as well? my truck bed is over 70 inches long and the truck in the video seems the same.

Nice job;-))

Those holes drilled are bound to rust where the metal is now exposed. How about an update to this?

Can you make me 1 but with out the snaps ?

where did you get that size Vinyl?

Great video do you take orders

What about if you have a rare truck that you dont want holes in your truck.

Where are ya'll located in GA?

Found material on eBay they sell in yards , anybody know how to calculate that into dimensions I would need ? (

That's really amazing I want u to make one for me

O snap!you drill a hole in the bed! So heart breaking! Lol

Would you make one for me? How much would you charge me?

I recently purchased the snaps from the link you provided but it doesn't come with the screw studs.☹️

More closeups would have been nice 👍

Drilling holes into my truck isn't sown thing I want to do. And I want it to be compatible with my back rack. I could buy a regular cover but I'd have to get new hardware for the backrack which is like $100. Guess I'll have to keep looking for solutions

I have a truck with a box that has a nautical theme. I want white with snaps. I would do the snaps but I want 2 1 inch strips cross ways sewn in on the bottom. I want rounded corners on the back side with that i inch stuff sewn all around. Check out my facebook or twitter for pictures. Would you be interested? Or maybe you would give me a price on the material. Contact me on my facebook please.

How we made a Snap on Waterproof Cover for Your Truck with 18oz Industrial Vinyl. It was pretty easy to do and the end result looks great and keeps rain out! Check out our step by step video and subscribe to our You Tube channel. #bigduckcanvas #diyproject

Great... Truck shop wants $350

tie ya hair back. please.. and wow great job..

So you spent $64 on a bed cover and caused $500 of body work and paint by drilling holes into the bed of the truck. Brilliant!

Oh sugar, please don't use a drill without getting your hair out the way, ( Just saying) great video , thanks

Haha ya just let me pull out my sewing machine lol 😂 😂😂😂😂😂 ya this is not for 99 percent of people . Geez.

Nah I'll fork over 229 for a tonneau cover that i don't have to drill into my truck but hey like you said it's not your truck.