How to Make a Waterslide Image | Adding Decals to your Tumblers and Crafts

Рет қаралды 82,371

3 жыл бұрын

Watch How to Make a Waterslide Image step by step. I will show you where to find an image, supplies you need, and exactly how to print your waterslide image. I'll also walk you through how to add a waterslide image to your tumblers!
*I forgot to mention* Use clear waterslides on LIGHT SURFACES! Light glitters & paints or you wont be able to see it!!
//SUBSCRIBE: Click here to subscribe: / alisoncrafts
//WATCH NEXT!
Sealing your Waterslide Decals: • How to Seal a Watersli...
Best Glitter Method: • How to Apply Glitter u...
Full Wrap Waterslide Decal: • Easiest Way to Make a ...
I participate in various affiliate programs. Some links that I share may provide me a small commission if you make a purchase. This is at zero cost to you. I only recommend products I use personally!
//MAKE THIS YOURSELF:
Waterslide Paper: amzn.to/2M0nF4Y
Silicone Brush: amzn.to/2XMelob
Clear Spray Paint (Check local hardware store): amzn.to/3bP60bs
Plastidip Glossifier (check local hardware store): amzn.to/3sy7psT
The Hungry Jpeg: shareasale.com/r.cfm?b=707299...
Creative Fabrica: www.creativefabrica.com/ref/4...
MOTHER TUMBLER (use code alison5): mothertumbler.com?sca_ref=983865.BNCKc5zQ5i
--------------------
Making Tumblers, keychains, pop sockets, and Starbucks cups are some of my favorite crafts! If you're interested in learning more and exactly how to make them yourself, you're in the right place!
Crystalac Introduction Series: • Playlist
Tumbler Basics: • Beginner Tumbler Tutor...
Keychain and Acrylic Blank Tutorials: • Epoxy Free Keychain Tu...
All tumbler tutorials: • Playlist
Silhouette Basics:
-------------------
//SHOP TOOLS: craftingthegoodlife.com/amazo...
------------------
//LET'S CONNECT!
Insta: Alison.crafts_
Blog: www.craftingthegoodlife.com
KZfaq: / alisoncrafts
TikTok: vm.tiktok.com/ZMJrVkFwL/
-----------------

Пікірлер: 193

@AlisonCrafts Жыл бұрын

I get 99% of all my images from Creative Fabrica! Use this link to get your first month FREE: www.creativefabrica.com/promo/5305/0p350-FGHIJKLMNO/ref/455608

@lawnamurray2678 3 жыл бұрын

Thank you, this is exactly what I was looking for. The way you break down every step it makes it so easy to follow along and not get confused.

@CBlizard 2 жыл бұрын

Thank you for the breakdown on how to print and make a waterslide. I'm not going to use brighttone though because I have a different method of doing it but this was helpful!!

@kwtrado 2 жыл бұрын

Thank you so very much! This has been so helpful

@snapandpourlife2453 3 жыл бұрын

Thank you!!!! I was struggling with this.

@d_craftilicious636 3 жыл бұрын

I love how simple your tutorial is. TFS.

@AlisonCrafts 3 жыл бұрын

@4nikkimay Жыл бұрын

Great video. Thanks for sharing. 💕

@kristenhood4266 2 жыл бұрын

I learned so much thank you so much!!

@Mary10538 Жыл бұрын

Thank you so much, I needed to see this.

@TheAaval 3 жыл бұрын

Thank you sooo much for this video!! You saved me from going crazy!! I could not figure out how I was going to print the right size image onto the water slide!! You are a blessing 🙏🏻

@AlisonCrafts 3 жыл бұрын

So glad it helped!

@whatsyourwhycoaching6758 3 жыл бұрын

Honestly you’re amazing! Thank you. I definitely subscribed

@AlisonCrafts 3 жыл бұрын

Thank you :)

@Socialshug 3 жыл бұрын

BRAVO!! Just what I needed! 😊

@AlisonCrafts 3 жыл бұрын

yay glad you found me!!

@louisatanner4306 2 жыл бұрын

Hello Allison, good to meet you. Thank you for your awesome tutorial. I appreciate you.

@AlisonCrafts 2 жыл бұрын

THank you

@AlisonCrafts 3 жыл бұрын

**I forgot to mention** Use clear waterslides on LIGHT SURFACES! Light glitters & paints or you wont be able to see it!! Here is a link to the waterslide paper i use: amzn.to/35RkqUD

@WildWestx 3 жыл бұрын

What could I used on a darker surface?

@laurienunes5101 3 жыл бұрын

For darker background * print mirrored spray with clear, let dry, spray lightly with white cut out and place white side down

@caontiemcneal6547 2 жыл бұрын

thanks for making this understanable🥰

@AlisonCrafts 2 жыл бұрын

you're welcome!

@JenniferGarcia-ur5ix 2 жыл бұрын

I love this teacher tumbler! Would you be able to make a tutorial on this tumbler?

@coriander2760 2 жыл бұрын

so helpful!!!

@AlisonCrafts 2 жыл бұрын

I'm so glad!

@monicagarcia882 2 жыл бұрын

I love that glitter you used 😍🥰 What are the color glitters you used?

@ammeek7089 Жыл бұрын

It’s great to see your lives again !!!!🎉. He may have a dresses and I missed it when I was writing down the instructions that when printing waterslides say are we to mirror the image or no?

@nancys0117 2 жыл бұрын

Thank you for the video! Can I ask what glitter you used? What Colors?

@georgialewis7645 3 жыл бұрын

I'm new to your Channel I have watched so many this morning ...I'm so thankful I found your channel. I LOVE how easy your tutorials are to follow.

@AlisonCrafts 3 жыл бұрын

I'm so glad you're here!!!

@rebeccalopez9663 3 жыл бұрын

I love these tutorials ! I am definitely subscribing. Where did you purchase the confetti looking glitter?

@AlisonCrafts 3 жыл бұрын

Thank yoU! Sass and Crafts!

@naptimecreations 3 жыл бұрын

Awesome ❤❤❤❤

@AlisonCrafts 3 жыл бұрын

Thanks!

@naptimecreations 3 жыл бұрын

@@AlisonCrafts ❤❤❤❤❤

@mkhancepts3076 2 жыл бұрын

Thank you for this video! I was wondering, what is the process of sealing the waterslide if I'm not going to be putting a base color? Like just a plain stainless steel tumbler. I just want to put the image on and seal it.

@vannessajimenez986 3 жыл бұрын

Hi, I love this tutorial. Quick question, what Bright Tone do you use? I’m new to this and your videos are so helpful. Thank you for sharing.

@AlisonCrafts 3 жыл бұрын

This is the link! YOu want to choose GLOSS thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN

@KylaFuller 2 жыл бұрын

I'll probably have to watch some other videos too bc this one was helpful but also missed a lot of details. I'm not sure exactly what bright tone is. I was unaware this would take days. I figured a couple of hours then dry time.

@justinavaldezcarruthers863 2 жыл бұрын

Hello Allison, just found your channel; love it thanks for sharing your vast knowledge. Question for you, what glitter did you use for the bottom of the tumbler, I love the colors. Thanks in advance.

@AlisonCrafts 2 жыл бұрын

Graffiti Dots from Sass and Crafts!

@shannapimentel651 3 жыл бұрын

Hello Alison thank you for ALL your great videos! I want to start making tumblers, in your opinion which is easier waterslide or sublimination?

@AlisonCrafts 3 жыл бұрын

definitely waterslide...sublimation requires a special printer and special ink. and a special coated tumbler :)

@shannapimentel651 3 жыл бұрын

@@AlisonCrafts Thank you! 😊

@RedNosedLugia 3 жыл бұрын

Can the decals be applied to any smooth surfaces, or it is things like mugs only?

@4nikkimay Жыл бұрын

Love this video. Thanks for sharing. What brand of epoxy do you prefer? Thx. 💕

@AlisonCrafts Жыл бұрын

I actually don’t use epoxy, I use crystalac grande finale! thecrystalacstore.com/products/grande-finale-fast-dry-tumbler-coat?_pos=1&_psq=grand&_ss=e&_v=1.0&sca_ref=301559.RjXXsfrXmN

@hildarodriguez5279 3 жыл бұрын

Me encanta!!!! que brocha es esa?

@AlisonCrafts 3 жыл бұрын

Gracias! It's a Taklon Brush amzn.to/2LE6sPh

@mariaa6737 3 жыл бұрын

Love your videos. Can you please make one on printable vinyl on tumblers.

@AlisonCrafts 3 жыл бұрын

sure can!

@mariaa6737 3 жыл бұрын

@@AlisonCrafts thank you! 😊 do you have a link of where you get your tumblers?

@dopekreationsllc7431 2 жыл бұрын

Hello Ms. Alison, I'm late but I'm here for this lol. Love the tutorial and easy to understand instructions... Question, could I use epoxy over a waterslide decal?!

@AlisonCrafts 2 жыл бұрын

Yes of course!

@leana82lopez 2 жыл бұрын

So the brite tone seals it that’s all I’ll need ?

@trdb83 3 жыл бұрын

So if you use a laser printer you don’t have to seal the decal with the clear coat/plastic coat?

@plumpszcreations3217 Жыл бұрын

can you use modge podge sealer spray ?

@amberramsey394 2 жыл бұрын

Thank you so much for this video! I have been looking EVERYWHERE on KZfaq for a video EXACTLY like this one. My only question is how did you put the name in the middle? I’ll be using an inkjet and Microsoft word.

@AlisonCrafts 2 жыл бұрын

I typed it in before i printed the decal!!

@ghsasajoya5321 3 жыл бұрын

Its a wonderful .. can i make it without acrylic?

@AlisonCrafts 3 жыл бұрын

if you're using an inkjet printer you have to seal your images. If you have a laser printer you don't

@susiestanley6691 Жыл бұрын

Can you use bottle craft clear varnish

@christinarodriguez3119 2 жыл бұрын

Can I add a water slide to powder coated tumbler or do I have to sand it first? Also do I have to sand the whole tumbler to cover it in epoxy? I’m not adding glitter just a water slide but my husband wants it to be epoxied so the image doesn’t get messed up he works in construction.

@trinityluedecke7506 2 жыл бұрын

So if I’m using epoxy, is the brite tone still necessary?

@nhaydeehdz03 3 жыл бұрын

Wow! Beautiful instructions 😝 I think I’m ready 😁🤓 can I ask what did use for crayon? ☺️

@AlisonCrafts 3 жыл бұрын

you got this!! I use this: www.creativefabrica.com/product/crayon-split-monogram-svgback-to-school/ref/455608/

@nhaydeehdz03 3 жыл бұрын

@@AlisonCrafts thank you 😊 what font is that?

@AlisonCrafts 3 жыл бұрын

@@nhaydeehdz03 farmhouse lemonade!

@chelseasmith2976 2 жыл бұрын

Does it matter white vs clear waterslide? BTW I love this tutorial! You inspired me to make my own

@AlisonCrafts 2 жыл бұрын

it does matter! Here is the differencE: kzfaq.info/get/bejne/iLCqa7yJ0rC6iZc.html

@jamesross8704 2 жыл бұрын

And do you still use bright tone instead epoxy?

@janette1694 2 жыл бұрын

Hi does anyone know the equivalent to brightone in the uk ??

@hollyclayton1649 2 жыл бұрын

What inkjet printer do you use?

@adelepadgett9772 2 жыл бұрын

When printing do you turn bleed on or off

@CandypinkHeart 2 жыл бұрын

what printer do you use and ink ?

@radiationglass 3 жыл бұрын

Is this the same process for using Amazing Clear Cast Resin? (I'm assuming so🤷‍♀️), and thank you so much for your videos!! They are great!

@radiationglass 3 жыл бұрын

Also, could I use Triple Thick Clear Glaze and Plasti Dip multi purpose flexible coating?

@AlisonCrafts 3 жыл бұрын

Yes the process is the same for resin!! And I think triple thick will work... I'm 99% sure any clear spray will do!

@dlavanceful 3 жыл бұрын

What is bright tone?

@whitneybacon1499 2 жыл бұрын

Can you print a water slide with a sublimation file?

@decs3487 Жыл бұрын

im looking to create my own words to make custom tumblers for the bar i make shirts for can you tell me an app that i can do this with please.

@buzzyboocraftsllc Жыл бұрын

Would this be the same process if I use Grand Finale?

@laurabarlow6167 3 жыл бұрын

You can link your bright tone that you use? Also if you don’t mind me asking what laptop do you use? I use a Mac and a HP laser printer and it doesn’t come out that bright.

@AlisonCrafts 3 жыл бұрын

I would look into how to can adjust your printer settings, you could probably make some adjustments to make them look a little better! Here is the link to Brite Tone: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN

@Mychannel-wo9qq 2 жыл бұрын

I know this is an older video, but how do you make a see through decal? Like, I’m trying to make a Dr Pepper decal but it has the maroon color already there and I want the glitter to show through it to make the maroon color not the already maroon color with the logo. Not sure if that make sense lol

@jamesross8704 2 жыл бұрын

Did you make your own cup holder..?

@nathalieveillette8928 3 жыл бұрын

I use laser waterslide. Once he’s on my tumbler, do I have to seal it before BT? If yes, how long should I wait before sealing with clear gloss spray. Thank you, I love your videos

@AlisonCrafts 3 жыл бұрын

you don't need to seal at all with laser waterslides! just make sure you let it dry overnight before BT

@nathalieveillette8928 3 жыл бұрын

@@AlisonCrafts thank you, you are so helpful.

@aurora88888 3 жыл бұрын

Do I need a special ink for the paper? or can I use the regular ink that comes with the printer?

@AlisonCrafts 3 жыл бұрын

you can use regular ink!

@brendajohns007 2 жыл бұрын

What Microsoft word you using

@bellaburke4948 3 жыл бұрын

If I wanted to add a water slide to a basic non decorated cup that isn’t sanded do I still need to add that liquid you mentioned at the end?

@AlisonCrafts 3 жыл бұрын

if you're doing ceramic you should probably bake it to make it more permanent. if it's a different kind of cup you'll want some protection so it doesn't crack or scratch over time.

@sarahbeee5240 2 жыл бұрын

I'm not going to use them on tumblers. What is bright tone?

@amygomez9105 3 жыл бұрын

What kind of brush is that you are using to brush the Brite tone on

@AlisonCrafts 3 жыл бұрын

I use a taklon brush! amzn.to/2LE6sPh

@brendamartin8278 3 жыл бұрын

If you want to add a waterslide to an acrylic blank, I know you have to seal and wait 48 hours before using Brite Tone, but how would you prep the blank when using on the non-glittered slide?

@AlisonCrafts 3 жыл бұрын

Light scuff sand with 400 grit sand paper and do 3 coats of BT before the waterslide!

@sandrasanders3730 3 жыл бұрын

Hi. Thanks so much for your videos. This is my first time trying this so I'm starting simple. I purchased 16-oz insulated double-wall tumblers (BPA Free Acrylic materials) for a family vacation. I am using my laser jet printer to print on clear waterslide paper. I'm not doing anything else to these clear cups besides these waterslide designs. Should I wash these and dry as you suggested, then follow your instructions with the Brite Tone before and after placing the waterslides? Of course I would wait the appropriate time. I was a little confused about the sandpaper. But I guess that would only be done if your were painting, glittering, or another type of decorating. I feel like if I sand the tumbler, then it will look scratched. Is this correct, or does the Brite Tone make it look smoother? Thanks for your help.

@AlisonCrafts 3 жыл бұрын

scuff sand the acrylic with the 400 grit sand paper, then do a few coats of brite tone. Then you can add your waterslide & follow that up with a few more coats!

@sandrasanders3730 3 жыл бұрын

Thank you! One more question. After applying the waterslide onto the tumbler, you said to dry for 24 hours before applying Brite Tone. Is this for both Laser Jet and Ink Jet printers?

@sandrasanders3730 3 жыл бұрын

Nevermind. I looked through your comments, and you had already answered my questions. Thank you!

@whatscracking8831 2 жыл бұрын

What is the model of your printer

@catwomanvl05 2 жыл бұрын

If you put glitter do you put a thin layer on epoxy before doing the wat waterslide?

@AlisonCrafts 2 жыл бұрын

You want it to be fully smooth before adding waterslides

@lizbethcampos223 2 жыл бұрын

I follow you on TikTok

@sweetbri27 2 жыл бұрын

Thanks so much for your video! I'm making waterslide's for nails and I'm having trouble with my decal being translucent. I used clear paper, printed my images, sprayed 3-4 layers of clear spray paint. When I soak the image (15secs) it's pretty translucent. Can anyone give me some feedback on how to fix this?

@AlisonCrafts 2 жыл бұрын

Yes, the clear waterslide is translucent but should show up pretty well on a light/white background. You can use white waterslide though!

@sweetbri27 2 жыл бұрын

@@AlisonCrafts Thank you! Mine were almost completely transparent on a yellow nail. I’ll keep trying & look into white waterslide paper 🙂

@claudiaama7451 2 жыл бұрын

do you use sublimation ink for waterslide decals? I added sublimation ink to my inject printer instead of the in that comes with, but colors are faded.

@AlisonCrafts 2 жыл бұрын

No regular ink! Sublimation only for sublimation projects

@jackiec.7947 3 жыл бұрын

How do you know when to use clear water slide paper or the white water slide paper?

@AlisonCrafts 3 жыл бұрын

so white waterslide has a white back ground, so you may want to use it on a dark background. You'll also want to cut it with your cutting machine so you can get as close to the image as possible! Here is a side by side: kzfaq.info/get/bejne/iLCqa7yJ0rC6iZc.html

@Sahar1011 3 жыл бұрын

Can I use crystalac on stoneware mugs? Do I have to sand it ?

@AlisonCrafts 3 жыл бұрын

You know, i'm not 100% sure on that. I'll ask around :)

@Sahar1011 3 жыл бұрын

@@AlisonCrafts thank you so much 💕

@susiestanley6691 Жыл бұрын

For clay produ

@mariacontreras5859 2 жыл бұрын

What kind of printer is recommend? Can we use the same as sublimation?

@sewnastassia Жыл бұрын

I have an inkjet printer! I’m loving it too.

@JenniferLevi6 2 жыл бұрын

Do you not use epoxy? Do you use that finishing liquid instead?

@AlisonCrafts 2 жыл бұрын

don't use epoxy, I use CrystaLac Brite Tone!

@venusbeautygirl 2 жыл бұрын

Can you buy decals I don't have a printer

@dlavanceful 3 жыл бұрын

Are you using bright tone instead of epoxy?

@AlisonCrafts 3 жыл бұрын

Yes i am!

@sandracarrillo2396 3 жыл бұрын

Can we do these steps on clear glass?

@AlisonCrafts 3 жыл бұрын

yes!

@ElisiaRae 3 жыл бұрын

Is hp deskjet a good brand

@AlisonCrafts 3 жыл бұрын

I don't know much about it...i'd check reviews on amazon!

@newcheveu 2 жыл бұрын

Do you use sublimation ink to print it?

@MsHoneyLove04 2 жыл бұрын

I was searching the comments for this exact question… did you figure it out?

@Shamrockshredder 2 жыл бұрын

I have problems with the water slide cracking or tearing. Did you say let it dry before epoxy?

@AlisonCrafts 2 жыл бұрын

definitely let it dry really well! also try using this method to seal: kzfaq.info/get/bejne/a5p1fLl0ypfYkYk.html

@1120forevrr 3 жыл бұрын

So the same water slide paper you put In A printer I can use with my Cricut?

@AlisonCrafts 3 жыл бұрын

Yep!

@naturallycyn 3 жыл бұрын

If you only printing a small image, can you use the same waterslide sheet for for future projects? Hope my question make sense

@AlisonCrafts 3 жыл бұрын

So i've done it where i use like the top 3 inches (or whatever size) and then turn the page around so the side i didn't use can still feed into the printer. Does that make sense?

@naturallycyn 3 жыл бұрын

@@AlisonCrafts so you cut out your image before you seal or do you spray the whole sheet?

@AlisonCrafts 3 жыл бұрын

@@naturallycyn I cut off the tip where the design is before I seal. Definitely don't seal the whole page if you still want to print on it!

@naturallycyn 3 жыл бұрын

@@AlisonCrafts thanks...I was always hesitant thinking I would waste a full sheet

@Moongooningchief 2 жыл бұрын

Not sure you will reply since it's been so long since this was posted. But can you use a laser printer for waterslide?

@AlisonCrafts 2 жыл бұрын

yes absolutely!!

@fatimahamid8547 2 жыл бұрын

Hi, do you mirror this if you’re using Cricut ?

@AlisonCrafts 2 жыл бұрын

you don't have to mirror waterslides but some people like to apply them that way

@jennieschaffer212 3 жыл бұрын

Is there anyway to make glow in the dark tumbler ? I know you can add the pigment powder to epoxy but how would it work for Crystalac ? Also can you use acrylic paint to splatter on the cup ? Love watching your videos !

@AlisonCrafts 3 жыл бұрын

yes you can do both of those things! You can mix glow powder into BT and do a few coats of it!

@jennieschaffer212 3 жыл бұрын

@@AlisonCrafts thanks so much for the reply !

@crystalw4037 3 жыл бұрын

If my water slide has already gassed off for 48 hours before adding it to my tumbler how long do I need to wait before adding BT

@AlisonCrafts 3 жыл бұрын

overnight to make sure it's dry

@anthonystrazza4586 3 жыл бұрын

You rock I’m going to water slide an image onto my bikes fuel tank

@AlisonCrafts 3 жыл бұрын

that's so cool!

@samanthamed7839 2 жыл бұрын

Can I use tint printer? 🙏🏼❤

@AlisonCrafts 2 жыл бұрын

I'm sorry, I'm not sure what that is

@bonitajohnson4720 2 жыл бұрын

Is the bright tone like epoxy?

@AlisonCrafts 2 жыл бұрын

It's a non toxic alternative. Just a safe option to use instead!

@sherylldupuis6323 3 жыл бұрын

What is bright tone. Is that epoxy? Im new to tumblers. TFS.

@AlisonCrafts 3 жыл бұрын

Brite tone is a non toxic epoxy alternative!

@sherylldupuis6323 3 жыл бұрын

@@AlisonCrafts ohhhh. Thank you. Thats great. Have a wonderful day. ❤️🇨🇦

@julesjulie6300 3 жыл бұрын

What kind of paper for inkjet?

@AlisonCrafts 3 жыл бұрын

amzn.to/3edWa2u

@nancyfarias5098 3 жыл бұрын

What printer do you use?

@AlisonCrafts 3 жыл бұрын

I have an old epson. Any printer will work!

@2002smartgirl 3 жыл бұрын

Can you upload the image into design space?

@AlisonCrafts 3 жыл бұрын

yes!

@julesjulie6300 3 жыл бұрын

Will it have color if I upload it onto design space?

@callesixtwo Жыл бұрын

Do i need to mirror this?

@AlisonCrafts Жыл бұрын

it depends on how you apply. the way i do it in this video you do not need to mirror

@jfurner1 3 жыл бұрын

I have an office jet printer. Idk what would be the best paper to get to make water slides 😭

@AlisonCrafts 3 жыл бұрын

honestly any printer will work!

@amandabomboy2244 3 жыл бұрын

What if I don’t use bright tone? I use UV resin is it the same steps?

@AlisonCrafts 3 жыл бұрын

Yep!

@amandabomboy2244 3 жыл бұрын

@@AlisonCrafts also do I have to seal my image if I am using printable sticker paper using an inkjet printer? I know I do for water slides, was curious about printable vinyl and sticker paper

@AlisonCrafts 3 жыл бұрын

@@amandabomboy2244 it really depends on the brand of sticker paper. Best to test a little bit and see!

@amandabomboy2244 3 жыл бұрын

@@AlisonCrafts thank you so much.

@amandabomboy2244 3 жыл бұрын

@@AlisonCrafts also will any sealer work?