Really appreciate you posting this guide

this was BY FAR the best chameleon cell tutorial I've seen! can't wait to finally nail this technique, love the results!

This helped me put some things together that I had been missing from other tutorials. Excited to try this out! Thank you!

If you do a lot of honey comb as a base you could use a board and drive finishing nails through it to make a template. Then you can coat the nails and do all of the dots at once for a more consistent pattern much faster.

Great video man! Really appreciate it!

Definitely what I was looking for! Thank you for showing us everything from mixing the die to the end product!

I've tried almost every single type of oil from different videos and this one finally did the trick! Thanks for the great content and great material suggestions!

Great tutorial! Funny enough, my local DG shop said the same thing about the yellow 3-in-1 silicone, that it produces the best cells.

You are a true artist my man 🤌🏽 chef’s kiss

Great tutorial! There excellent disc dyeing tutorials on youtube and this is definitely one of the best I have come across. Keep them coming and I know I will watch them. Sharing your experiences and little tidbits of information, like poking the pin all the way through (which you pointed out does not really matter). Im still new to disc dyeing and where I am from the materials, like floetrol, are hard to come by and expensive. I have experimented with chameleon dye, but with poor results. Watching tutorials and absorbing the information here and reddit will (hopefully) increasing my chances of success! Many thanks for taking the time to record your process!

I've seen a few other methods (mostly shaving cream or lotion beds and some spin dyeing) and read about folks using saran wrap, but did not really understand what the saran wrap drag was all about. Seeing this vid made it all clear. All 3 of those discs are beautiful.

Hey just wanted to thank you for making these videos. Just dyed my favorite disc I’ve ever done

algo popped up this video - looks great. Really enjoyed the content on a lazy Sunday afternoon before I do some errands.

liked and subbed before the video even started based solely on your work from IG, love your stuff man thanks for sharing

Watched your vid. You do some of the best dyes I’ve seen. I liked your video so much I had to go and buy the disc. If you dye anymore molds that I bag I’ll probably be snatching those up as well. I can’t wait to get my disc. Thank you!

Can't wait to run a few of these tonight! Sick guide

This is the most in depth video I could find and the results are awesome! Keep making videos please!

Would love to see the bubbles technique next!

Thank you so much for this!!

This was so helpful thank you! I primarily use white glue beds amd I was struggling with this type of cell dye. The round pan was my downfall lol.

Great demonstration. Thank you. I am excited to try this process.

Yeah great tutorial, this is amazing, want to see more and i followed your instructions!

Sick!

Thanks so much for walking us through your process m8! And final product is incredible!!

Thanks man you rock! This was a pleasure to watch and can’t wait to get my dyes in and try something similar! Thanks for the tips 🤘

Wow those are sick!

Great Video! Thanks for the in depth tutorial.

Awesome!!!! I just need some Dyes!! I used to do swipes with Acrylic Fluid Art on canvases so this is very familiar to me. 3 Gallons of Floetrol sitting next to me staring at me. lol Thanks for sharing

THIS WAS AWESOME!

Great video one of the most comprehensive makes me want to try experimenting 🤓

This is such relatable content haha

Great video!! Thanks for posting! I would love more instrucional videos like this!

Great vid. I did slightly lose my shit when you kept referring to that SPATULA!! as a squeegee 🙄🤣

Bro that’s amazing I can see why these disc can be so expensive 😭

So after you re-swipe the bed with black, do the cells reform because the first time you added the silicone? Or do you repeat that process too? Incredible tutorial and even better results. Subbed immediately!

That crave is purty

These are amazing looking, thanks for the tutorial!

Amazing guide! Thank you!

Great tutorial- thanks

Something I thought of before you raked the lines with the pic. Was to put the disc in on one end and slide and turn at the same time I wonder how that would turn out

Awesome job!

Im so glad you made this video! Thanks man! Have you ever done just two colors?

thank you for sharing!

Your the best brother. About to send some beds using this technique right now. I’ll send you some pictures of the results to your insta. Delaware dyes by the way.

Hi! I love your videos, I am getting ready to dye my first disc. I was curious as to why you use a floetrol bed vs a glue bed in a lot of your dyes. I was watching another youtuber for the lazywave technique and they use a glue bed. Does the floetrol work better for cells? Thanks for any input!

Awesome video! What color blue and yellow did you use??

How do you go about doing the second generations? Once you pull, do you add more black to the edging and just wipe? Do you mix the colors in any way beforehand from what happens during the pull? Do you add more color? It's just so nuts that you kept the color separation on the other generations even though the bed looked pretty mixed up after pulling the first disc from the bed. Thanks again for the help!!!

Very very very awesome and appreciated video! I have been hoping to find something that shows everything step by step for these cell dyes and this is just perfection. Thank you!! One quick question - is the black just another floetrol mix that you have bottled, or was it a different mix? Would love to see more!

Great video. Im assuming you mentioned it and I just didn't pay close enough attention, but how much total floetrol did you use? I feel like I use waaaaay too much when I dye.

Great tutorial! I’ve made several attempts at this style, some look okay but none like yours! I have a question about your plastic wrap…did that cutter come with the pack or did you have to add it?

Hey thanks for tutorial! Very well done. I attempted it, but had trouble keeping the poured dye in straight lines and separated, they ended up bleeding together. Do I just more practice pouring or maybe I put too much floetral in the pan? I ended up doing a second wipe with gold dye and it came out really cool. Thanks again

What temperature do you end up with at the disc?

Loving this content! Would it be easier/more efficient if you put black on either end of the tray and swiped from one side to the other? Rather than reswiping the same black over your colours? Thanks for your videos man, huge help!

Amazing. Subbed.

So my floatrol dye keeps sinking to the bottom instead of sitting on top. Any ideas on how to prevent that? I appreciate it.

Thank you so much for this tutorial. I have been struggling with cell dyes and this will help a ton! Only question I have is did you mix the silicone in the cup with something or did you just have the silicone in the cup when you dipped the needle?

Hello, would you add or change anything to this tutorial after doing it for another 10 months?

How did you mix the black? You explained the other colors but not the black. Do you still mix it the same as the others with floetrol?

Great tutorial - very thorough. You might want to get a camera stand as the head mount was making me seasick.

What temperatures do you shoot for my friend? I've seen it long ago in a video but can't seem to find it

Any reason my 3-1 silicone oil might not have created cells? Can't figure it out

is it possible to do this with lotion? instead of floetrol? Great video and good instructions! :)

Excellent video! I love those discs! Question: I am following this video exactly, using the same ratios/ingredients, including the same exact silicone brand. However, whenever I poke the tooth with silicone into it, nothing happens? Any particular tips for this?

question/help - what ratio of floetrol, powder and then silicone oil would you use in an 8oz container? also how do you/dont you mix in the oil???

What ratio do you use to mix your iDye Poly Black? Are you mixing silicone in it here?

Does the iDye poly affect the cell development in any way (other than color)? I have been through almost an entire jug of floetrol without having cells develop when poked. I'm fairly certain I used no oil in my first couple of attempts (other than poking). Thank you for this detailed video

Came across your stuff recently. You may have said before, but I don't remember hearing it. What wattage heat lamp bulb are you using? Thanks!

Hi Sry for my bad english, but i have a question. I tried disc dyeing the first time today and i used flotroel colors in a Lotion bed. and the colors are very bright Like pastell colors. It Looks nice but Not what i expected. So now the question: should i use Lotion colors in Lotion Beds and flotroel colors in flotroel beds. But what colors do i use in shaving cream beds ? What are your experiences ? Have a Great day Eva

Can i use any floetrol or some specific

Awesome tutorial! If I may ask, what is the tool you use to poke the "combs" ? And do you have any tips what I should do differently, as I tried my best to follow these steps, but when I had dragged all the black over , the colors from underneath were still very visible and started already creating a lot of cells.

You usually hear about people using acetone or alcohol to help the dye penetrate. It's crazy you don't need it. Do you think you would need it more if your not using a heat lamp?

Been having issues with the silicone causing undyed spots everywhere I dip it

I wish this wasn't a head-mounted camera. The motion sickness made it really hard to watch, even though I wanted to learn the technique.

How long would you let it sit if you didn't have a heat lamp?

Is the black you used pro chem black mixed with poly dye black and the silicone?

can you put links to what you buy.

Are you using the latex based or acrilic base flowtrol

Instead of Saran Wrap to spread the black over the top, do you think a drywall taping knife would work?

Those discs are sick as fuck!

Wait wait wait that paper with how to mix pro chem I need that I didn’t get anything like that. I know I’m making some mistake with my mixing

How much idye black do you use?

If you do not have a heat lamp, how long would you let the disc set?

Hello lil bot. What color Black are you using???

So can you use any colors other than black as your cover?

Is the poking just a stick or some kind of dropper?

Will a heat mat work also?

Can this be done without heat?

Yep, the moment when you realize "why havent I dyed a disc on a turkey tray, they're disposable and all?" Sorry fake countertops I had to get rid of due to looking like someone died on you, despite plastics rolls and newspaper to try to not let you into the countertops, instead I kind of of just dyed them spotty red.(shaving cream dyes in pie tins, because thats how frisbee started) Gotta ask, ever melt the cups youre mixing in with too hot of water?

What the thing your using to dip the oil in

Thank you so much for this! I have to ask, though, that you might want to put the camera down somewhere rather than having it on your head moving around. Kind of nauseating! O.o

This is a wonderful tutorial, but the filming is really distracting. Please get a tripod.

If you used paper plates you’d have less waste.

Man this could really have used some time saving edits. Like: - When you're dipping the little rod in there. - The part where you put it under the heat lamp and we had to sit there for like 4 minutes - The part where you put the little pieces of saran around the disc when it was in the dye - THE ENTIRE washing the disc part off!! Great discs and idea, but some of those things could've been cut by 75%.

I get motion sickness from this video. Probably because of the headset camera. Had to stop watching... :/