How to Make CURVED Drawers for a Round Coffee Table

Рет қаралды 145,923

2 жыл бұрын

Right now, for a limited time, save 60% on your first 3 months of Audible. That’s only $5.95 a month. Give yourself the gift of listening. For more - go to www.audible.com/tamar or text tamar to 500 500.
Huge thanks to Woodcraft for sponsoring what I do. You can find everything you need to start woodworking here -
Or check out the individual tool links down below...
For more details, check out my website - www.3x3custom.com/tutorials/
Kerfmaker Video - • How to Make Perfect Gr...
____
WOODCRAFT LINKS
Bandsaw:
bit.ly/PowermaticBandsaw
Flush Trim Bit:
bit.ly/UltimateFlushTrimBit
Glue with Extended Working Time:
bit.ly/ExtendGlue
Slot Cutting Bit:
bit.ly/SlotAndRabbetBit
Bearing Kit to change depth of cut on the Slot Cutting bit:
bit.ly/BearingKitForSlotAndRa...
Kugihiki Saw:
bit.ly/KugihkiSaw
AMAZON (affiliate) LINKS
Shaper Origin:
amzn.to/3dCHlXm
Red Push Blocks at Router Table:
amzn.to/3x0VYM
____
My Amazon Store - amzn.to/2uRpplb
_____
My Recording Equipment
Camera:
amzn.to/2scO0mu
Shotgun Mic:
amzn.to/2rp1ETp
Lav Mic:
amzn.to/34r7Ico
Voiceover Mic:
amzn.to/2rs9TOx
___
FOLLOW
Website - www.3x3custom.com
Subscribe - / @3x3customtamar
Instagram - / 3x3custom
Facebook - / 3by3custom
_____
Links above are affiliate links, I make a small commission if you click on them at no extra cost to you. clicking on them really helps me continue to make more projects :)

Пікірлер: 827

@its_just_fish_original 2 жыл бұрын

"Drahs". My best friend says it the same way. Your channel is always amazing. Thank you for the inspiration. :)

@kenross4453 2 жыл бұрын

been my biggest peeve and only real gripe about Tamar since I started watching a few years ago, lol.

@justavian 2 жыл бұрын

It's interesting, because i'd expect that pronunciation from someone with a New England accent, where a lot of the final "r" sounds get lost. But i'm not noticing anything else that she's saying falling into that kind of accent.

@blazer6248 2 жыл бұрын

Drores > drahs

@Kabluey2011 2 жыл бұрын

I think it's a nice pronunciation.

@TheCHRISCaPWN 2 жыл бұрын

I came to the comments to see if I was the only one who thought that pronunciation was odd.

@WoodcraftBySuman 2 жыл бұрын

I can't tell you how much I respect the "...fair warning, this was my first time ever doing this, so, this is not a how-to video". Wayyy too many makers in this space does something once or a few times and pretend to be an expert on camera. The urge to push out content is very real. But being open and humble is much appreciated.

@3x3CustomTamar 2 жыл бұрын

Just documenting as I learn!

@youtukang 2 жыл бұрын

😊😊👍

@paulpardee 2 жыл бұрын

OMG, Tamar! You can't hit us with the 'draws' in the first 10 seconds of the video! I can't wait for the full build video, that table looks like it's going to be EPIC!

@3x3CustomTamar 2 жыл бұрын

😂😂 I can’t wait to finish it!

@TomCRitucci 2 жыл бұрын

First 3 seconds!!!

@toddharshbarger8616 2 жыл бұрын

Excellent Tamar! I love how you present yourself as sort of common novice woodworker - its so comforting and welcoming, but lets make no mistake you ARE an accomplished essentially professional grade woodworker, and it is very kind of you to take all of us along in your process!

@3x3CustomTamar 2 жыл бұрын

Glad you’re enjoying watching the ride. Ha

@alans1816 2 жыл бұрын

Ok. You started out recording these as a novice, but you have demonstrated how much capability you can acquire if you keep pushing yourself to try new things. It's been a fun ride, and I'll keep watching.

@3x3CustomTamar 2 жыл бұрын

@@alans1816 always try to push myself! I love learning all these things!

@MtnBike60532 2 жыл бұрын

No “essentially” required. She’s definitely professional grade.

@toddharshbarger8616 2 жыл бұрын

@@MtnBike60532 with “know” qualifications! Cuz Tamar definitely KNOWS!

@grantnorgren771 2 жыл бұрын

Thank you for showing us garage bandits who don't have every shop tool possible, how to still make amazing projects with common tools.

@3x3CustomTamar 2 жыл бұрын

Glad you appreciate it!

@JamesDeese 2 жыл бұрын

I like that you have no fear. Just dive in, learn and adjust. Show folks that and they can avoid the mistakes. Makes you a grand teacher and a downright great carpenter.

@3x3CustomTamar 2 жыл бұрын

I learn by doing!

@TheHailacopter 2 жыл бұрын

“This isn’t a how-to, it’s a learn-along-with-me”. That’s the best kind of video. I want to see the process as much if not more than the result.

@3x3CustomTamar 2 жыл бұрын

Well you’ve come to the right place. Ha

@NOLAfugee 2 жыл бұрын

The best lesson: drawer fronts, a jig, and the clamps that hold them together are heavy.

@Lincolnstww 2 жыл бұрын

In for hearing Drawers said 100+ times!

@badcat4707 2 жыл бұрын

Me too ;-)

@3x3CustomTamar 2 жыл бұрын

I should have a drawer counter on the bottom 😂

@RustyCas999 2 жыл бұрын

“Drahs”… just one of many reasons we love you Tamar!

@TheVonhammer 2 жыл бұрын

I absolutely love how you say drawers….keep the awesome vids coming.

@3x3CustomTamar 2 жыл бұрын

😂

@angeladangela500 2 жыл бұрын

This is the first of your videos I’ve seen, and I am a new fan. I love the “bloopers” at the end. I haven’t seen anyone else do that.

@3x3CustomTamar 2 жыл бұрын

Haha thanks

@SpencleyDesignCo 2 жыл бұрын

Well done, Tamar! Thanks for showing the process

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@ronsonmacleod1719 2 жыл бұрын

This is the first time I've heard your accent when you said "draws" and "drawfronts"! Well done and thanks for the sharing! Love it!

@3x3CustomTamar 2 жыл бұрын

😂😂

@jscook54 2 жыл бұрын

This was so complicated . What a truly talented maker/builder you are. So creative.

@3x3CustomTamar 2 жыл бұрын

☺️

@tonywwp 2 жыл бұрын

You have truly advanced your craftmanship. Outstanding!

@3x3CustomTamar 2 жыл бұрын

Thanks so much! ☺️

@TheTrullGallery 2 жыл бұрын

I would never have thought to glue up the inside and outside peices at the same time. Brilliant! Keep up the great work.

@3x3CustomTamar 2 жыл бұрын

Worked really well!

@mattyallwood 2 жыл бұрын

Damn!! You keep pushing yourself and you just keep getting better and better. Love your pragmatic approach and humbleness.

@3x3CustomTamar 2 жыл бұрын

Thanks! I love taking on these challenges

@richs5422 2 жыл бұрын

Well done! It's excellent technique to use 1/2" plywood with 1/4" grooves in drawers of any reasonable size. Much stronger and not much extra work or cost. Lots of old plywood drawer bottoms are wavy and/or falling out of their grooves. The space underneath a thin bottom is wasted anyway, might as well fill it with wood.

@3x3CustomTamar 2 жыл бұрын

Yeah! I did it out of necessity here but I’ll prob do it again in the future!

@CaliRaftDude 2 жыл бұрын

100% agree here - BUT be careful of the types of slides you are intending to use. BLUM under-mounts for example need that space for the slide hardware. For side mounting slides its a no-brainer, gives you additional gluing surface on the bottom and simplifies sanding/finishing the drawer. Costs probably go up a little but does reduce the types of ply in your inventory.

@pemtax557 2 жыл бұрын

This video was really inspiring ... I really enjoy watching you identify and solve challenges in a project that is obviously demanding from the start. You really are a natural at this. I look forward to the final video on this project, it's plain to see that it's coming out well. Cheers and thanks again for sharing your talent with us.

@3x3CustomTamar 2 жыл бұрын

So awesome to hear! Glad you liked it!

@digimikek 2 жыл бұрын

I'm jealous of your artistry and skill level. Well done!

@3x3CustomTamar 2 жыл бұрын

☺️

@MtnBike60532 2 жыл бұрын

The more you say "drawers" the more I like your videos! Well done!

@3x3CustomTamar 2 жыл бұрын

😂

@apowell389 2 жыл бұрын

You never stop impressing me with your skill set! I used to want to be like Norm...

@3x3CustomTamar 2 жыл бұрын

☺️☺️

@bobpurcell5662 2 жыл бұрын

Got to hand it to you, Tamar-you go for the challenging projects. Nice work.

@3x3CustomTamar 2 жыл бұрын

Always up for a challenge

@robmille Жыл бұрын

Terrific workaround on not having a jointer! The workarounds you come up with make your channel so much better than so many other channels. And the outtakes too.

@gnlman 2 жыл бұрын

I think your approach on how to create a curved drawer is fantastic. I have not tried curves yet, but I plan to. Your video is full of great ideas. Thank you so much. You are a very talented woodworker. I will be referencing your video many times during my curve build.

@3x3CustomTamar 2 жыл бұрын

So glad you found it useful!

@jonz01 2 жыл бұрын

Beautiful work as always! What I love most about your videos is that you are not afraid to show people that you are human and make a mistake now and then. So many people edit those out and try to be perfect.

@3x3CustomTamar 2 жыл бұрын

Haha we all make mistakes!

@stevedoesnt 2 жыл бұрын

I feel like I’m a kid again and watching This Old House. ❤️

@3x3CustomTamar 2 жыл бұрын

Haha!

@robertevans6481 2 жыл бұрын

I don't have any words,as you rocked it again. Have a awesome weekend.

@3x3CustomTamar 2 жыл бұрын

Thanks! You too!

@CaliRaftDude 2 жыл бұрын

BRAVO! You really have a mind/talent for problem solving and construction.. its very inspiring and I always pick up some ideas when watching your projects come to life!

@3x3CustomTamar 2 жыл бұрын

Awesome to hear! Thanks! ☺️

@willybaetens4648 2 жыл бұрын

Hi Tamar, Thanks for sharing. Making a round table is certainly not a challenge for you. As far as the drawers are concerned, I was thinking for a while, but you solved it. What I liked very much, were your fantasies about the different ways to solve your problems. By the way, when you started talking about it, my first idea was immediately to double the front and you came up with the same thing, nice. Keep it safe, it is not over yet. Willy from Belgium. 😷😷😷

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@willybaetens4648 2 жыл бұрын

@@3x3CustomTamar I like all of your vidios. Willy from Belgium. ✨✨✨

@craiggoodwin9704 2 жыл бұрын

Tamar, you've provided inspiration and enjoyment for my hobby of woodworking for quite some time. Reflecting back, I'd say a couple of years. Thank you. I sincerely hope you and your Family enjoy the best of these Holidays. I hope you can look back over the past year with a sense of pride and accomplishment during these Holiday celebrations. Thank you so much. Happy Holidays!

@3x3CustomTamar 2 жыл бұрын

So awesome to hear!

@scottsimpey2965 2 жыл бұрын

That’s such a cool project Tamar. It’s really great to see how you work around the difficulties and challenges of some of the different aspects of that and making the materials that you have on hand work for you. Your videos are so inspiring and I love your channel.

@3x3CustomTamar 2 жыл бұрын

So awesome to hear!

@mbrain03 2 жыл бұрын

“Draw fronts” so awesome 🤩

@3x3CustomTamar 2 жыл бұрын

😂

@TheRaven0811 2 жыл бұрын

I read some earlier comments and I agree, your ability as a woodworker has become professional quality. I can't wait to see the table video. Excellent work! Keep using those straws 👍

@3x3CustomTamar 2 жыл бұрын

Thanks!

@barriowoodworks 2 жыл бұрын

Many good tips here. Tamar, constantly brings her A game!

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@mikep3813 2 жыл бұрын

I really like how on all your build videos you will recap at the end with thing(s) you would do differently and other methods to accomplish the same task. Could be very valuable for some people who don't have those same tools. The extra thought is much appreciated 👍🏻

@3x3CustomTamar 2 жыл бұрын

Glad you appreciate it!

@brentfowler2317 2 жыл бұрын

Tamar, dang. That table, it's amazing. I love it. Can't wait to see the build video. That's one of the coolest project that I've seen on KZfaq. After watching most of the known makers, plus some of the newer makers for close to 6 or 7 years. Your build is about the coolest build I've seen. Your awesome thanks for another great video. Keep up the great work, and the awesomeness... You rock.

@3x3CustomTamar 2 жыл бұрын

Awesome to hear! I can’t wait to finish it so I can share it. Ha

@pierrebrodeur1492 2 жыл бұрын

Absolutely mesmerizing !!! You work sooo well.

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@TheHobbyShop1 2 жыл бұрын

Those turned out great. Top notch idea and workmanship. 👊🏼

@3x3CustomTamar 2 жыл бұрын

Thanks so much!

@manuterae9377 2 жыл бұрын

Jewelry work! Milady. Congratulation!

@Cyberdern 2 жыл бұрын

Hi Tamar, Thank you so much for the learning processes throughout 2021. I wish you and your family a beautiful Holiday season.

@3x3CustomTamar 2 жыл бұрын

You too!

@jontaylor8447 2 жыл бұрын

I am constantly bewildered by how creative you are in your problem solving! You totally demystified curved front furniture for me.

@3x3CustomTamar 2 жыл бұрын

Awesome to hear

@user-vr6ew6sx8h 2 жыл бұрын

One of the most fun youtuber! I get a tutorial on how to use the program to design these projects all most every video. Its easier to watch your vids just for the tutorials lol, but the wood working is like the added bonus!

@3x3CustomTamar 2 жыл бұрын

Hah thanks!

@vichenzadoorian7551 2 жыл бұрын

Not only here to hear the way she says drawers, but also to watch her incredible work. Thanks Tamar, love what you do!

@3x3CustomTamar 2 жыл бұрын

Hahah thanks so much!

@sisi284 2 жыл бұрын

Your work is so incredibly clean! 😍

@3x3CustomTamar 2 жыл бұрын

Thanks!

@root1657 2 жыл бұрын

Great video! So much information! (But I'm convinced you did this entire project to see how many times you could say that word that you know we love)

@3x3CustomTamar 2 жыл бұрын

😂😂😂 maybe….

@johnnyutah1053 2 жыл бұрын

I like how you say "drawer". Awesome video and project!!

@3x3CustomTamar 2 жыл бұрын

😂

@1959WoodWorkingHobby 2 жыл бұрын

Congratulations on the beautiful work!. Have a year of 2022 with great health and success!

@3x3CustomTamar 2 жыл бұрын

Thanks! You too!

@Grunt49 2 жыл бұрын

Always enjoy you explaining your process.

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@kkehoe5 2 жыл бұрын

You are very smart to be able to figure out the challenges presented in your builds. Seems like you can visualize multiple steps ahead. I think you would have made a good engineer.

@3x3CustomTamar 2 жыл бұрын

I wish I would have realized I was into this stuff at an earlier age. Ha. Thinking of my next steps is what keeps me up at night 😂

@jurandirschoormans6797 2 жыл бұрын

What an amazing woodworker you are Tamar, thanks for another great video!!

@3x3CustomTamar 2 жыл бұрын

So glad you like it!

@jameshawk2537 2 жыл бұрын

That's awesome! You really simplified a complicated process!!

@3x3CustomTamar 2 жыл бұрын

Glad you think so!

@evsiu3522 Жыл бұрын

Master work, like always.

@bedongskifrombedongdesign1062 2 жыл бұрын

Great video again Tamar, I love curved projects and your table is beautiful !!!

@3x3CustomTamar 2 жыл бұрын

Thanks so much!

@Craftlngo 2 жыл бұрын

this Coffee Table is becoming a beautiful and well made Furniture! I can't wait to see the rest of the build

@3x3CustomTamar 2 жыл бұрын

I can’t wait to finish it. Ha

@robertstreff6945 2 жыл бұрын

Very nice, skills, execution, and planning. It looks like it will be very nice when finished.

@3x3CustomTamar 2 жыл бұрын

Thanks!

@flanikent 2 жыл бұрын

Tamar!! You always teach me something, and your always amazing! AND IT'S ALWAYS FUN TO HEAR YOU SAY DRAWERS :)

@3x3CustomTamar 2 жыл бұрын

Hahah!

@markielinhart 2 жыл бұрын

Hey! Thanks for 2021 and all your videos! Happy New Year to you and yours… 👏🌹🇦🇺✌️

@3x3CustomTamar 2 жыл бұрын

You too!

@DavidRavenMoon 2 жыл бұрын

You have a remarkably sharp mind for visualizing how these complex shapes will fit together! It gives me a headache! Lol

@3x3CustomTamar 2 жыл бұрын

😂

@toquemosmadera 2 жыл бұрын

A magnificent channel, a year full of good videos in which we have learned and enjoying the projects you have carried out, greetings.

@3x3CustomTamar 2 жыл бұрын

So glad to hear!

@25christian 2 жыл бұрын

This woman is absolutely awesome!!! I just woke up, my eyes weren’t fully open and she just woke me up with a eagerness to go to work and build cabinets I need to have done today. Thanks Tamar!!!

@3x3CustomTamar 2 жыл бұрын

Awesome

@kevin_delgado 2 жыл бұрын

I absolutely MUST see a collaboration between you and Marie of DIY Montreal making an apothecary cabinet.

@3x3CustomTamar 2 жыл бұрын

That would be cool

@shigthehandyman 2 жыл бұрын

Such raw talent!

@3x3CustomTamar 2 жыл бұрын

☺️

@ericsimpson4045 2 жыл бұрын

Very nice as usuall, great ideas and workflow. Thanks for sharing.

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@tree_carcass_mangler 2 жыл бұрын

Entertaining and educational, as usual! Can't wait for the finished build. Thumbs up and thanks for all you post.

@3x3CustomTamar 2 жыл бұрын

I can’t wait to finish it ha

@christopherhathaway6767 2 жыл бұрын

That was a very informative video of what could be a very complicated build. Can't wait to see the finished project. Great job!

@3x3CustomTamar 2 жыл бұрын

I can’t wait to finish it. Ha

@fabriziogamba4964 2 жыл бұрын

Sei brava Tamara belle idee creative grazie

@larry6686st 2 жыл бұрын

You're so smart. I love the behind the scenes part at the end

@3x3CustomTamar 2 жыл бұрын

😂😂

@chrisanderson4188 2 жыл бұрын

I admire your thinking!

@3x3CustomTamar 2 жыл бұрын

☺️☺️

@saggioculo5386 2 жыл бұрын

I always look forward to any video you post. I find that I can apply stuff I learn from your videos to projects I'm working on. It's always a good day when I learn something new.

@3x3CustomTamar 2 жыл бұрын

That’s awesome to hear!

@AJ-ln4sm 2 жыл бұрын

You definitely have the heart of a teacher. Excellent video.

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@steves524 2 жыл бұрын

Great looking design, always out of the ordinary.👌

@3x3CustomTamar 2 жыл бұрын

Thanks!

@tiffeee04 2 жыл бұрын

It’s always a good day when you post a video! Your content is always very entertaining and gets me pumped to go try new projects. Keep it up!

@3x3CustomTamar 2 жыл бұрын

So awesome to hear!

@gordeneden 2 жыл бұрын

Excellent video on a difficult build. Thank you.

@3x3CustomTamar 2 жыл бұрын

Glad you liked it!

@petewebster2977 2 жыл бұрын

I enjoyed that , well done . Keen for part 2 , keep the videos coming. Pete Australia 🇳🇿

@3x3CustomTamar 2 жыл бұрын

Thanks so much!

@Mikemalone7873 2 жыл бұрын

No click bait here! Watching you work and hearing you say “drahs” over and over totally delivered! Thanks for sharing and really looking forward to that table build.

@3x3CustomTamar 2 жыл бұрын

Haha! Hopefully I can finish it soon. But you know… life!

@Ebikelover 2 жыл бұрын

What a cool project, your realism is awesome. Cant wait too see the finished table.

@3x3CustomTamar 2 жыл бұрын

Thanks! Me too. Ha

@benraf 2 жыл бұрын

Hello Tamar, I wish you and your family a healthy year 2022. I wish you to stay creative and make lots of new project videos.🤗

@3x3CustomTamar 2 жыл бұрын

Thanks!

@senornormal 2 жыл бұрын

The more I see this channel, the more I like it and learn from it. I'm an ACTUAL newbie woodworker and be sure that this stuff is gold for me and for the rest ot woodworking junkies!! Have a great Xmas time!!

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@mikesmswoodworking 2 жыл бұрын

Can't wait to see the finished table. It's going to look great.

@3x3CustomTamar 2 жыл бұрын

I can’t wait to finish it. Ha

@felixreali7101 2 жыл бұрын

loved this one. loads of great tips. Thanks, Tamar. can't wait for the final vid.

@3x3CustomTamar 2 жыл бұрын

Glad you liked it! I can’t wait to finish it. Ha

@gtjman1 2 жыл бұрын

Another great video, Tamar! Thanks. I always come away from your videos with something new to consider in any of my projects. Main lesson being - a project is never as straight forward as it may seem. Keep up the great work!

@3x3CustomTamar 2 жыл бұрын

Haha it always seems straight forward when you think about it. Then you go to actually do it. And you’re like…. Shoot. How do I do this?! 😂

@joebeaton1101 2 жыл бұрын

Excellent presentation!!

@3x3CustomTamar 2 жыл бұрын

Thanks!

@SSRT_JubyDuby8742 2 жыл бұрын

You have a very effective thought process, very enjoyable. 😎🎙🪚✅

@3x3CustomTamar 2 жыл бұрын

So glad you enjoyed!

@MakerBeach 2 жыл бұрын

Great job as always! And super smart to make all your cuts with your jig still in place on the table saw before sliding it over to finish the dado cuts. Keep up the great work!

@3x3CustomTamar 2 жыл бұрын

Thanks so much! Lots of figuring out to do on this one. Ha

@mikehogan1827 2 жыл бұрын

Great video (again). When I make plywood drawer boxes, I always use 1/2” Baltic birch for all components, and I glue-in the bottom for extra strength. With the rabbetted edges of the bottom, you can also ensure the squareness of the box. The resulting boxes are incredibly solid.

@3x3CustomTamar 2 жыл бұрын

👍👍

@squashsantos 2 жыл бұрын

your work is always inspiring us. Wondefull job. congrats

@3x3CustomTamar 2 жыл бұрын

Thanks so much!

@abdulwoodudlike2know3 2 жыл бұрын

As usual Tamar, you never cease the amaze me. I love the way your mind works. And I enjoy the bloopers you share.👍🏽 Great job.

@3x3CustomTamar 2 жыл бұрын

Haha thanks!

@grahamserle7930 2 жыл бұрын

Nice work Tamar, in fact it's way better than nice, you really do always produce top quality products and that one's no exception. There are always numerous ways of achieving an outcome but I love that you're always thinking of ways you could have done it better or easier. I think you're awesome.

@3x3CustomTamar 2 жыл бұрын

Awesome to hear! Thanks!

@KarelKubela 2 жыл бұрын

You are the best Tamar! Great job! ❤️👍🏻

@3x3CustomTamar 2 жыл бұрын

Thanks so much!

@joelcopeland3018 2 жыл бұрын

Very nice... well explained, thanks...

@3x3CustomTamar 2 жыл бұрын

Glad you think so!

@vipfernandes94 2 жыл бұрын

I already loved your content and now knowing that you like eddie vedder makes my heart even warmer while watching your videos. Thanks for being awesome, Tamar!

@3x3CustomTamar 2 жыл бұрын

Haha I miss the 90’s….

@benraf 2 жыл бұрын

Hello Tamar, as always a great project. It's really fun to watch your videos. Thanks for the video, I look forward to seeing how the project continues. Stay healthy

@3x3CustomTamar 2 жыл бұрын

Awesome to hear!

@safistype5952 2 жыл бұрын

As always interesting and creative ways to do amazing stuff, thanks for sharing!

@3x3CustomTamar 2 жыл бұрын

Glad you think so!

@dddube12 2 жыл бұрын

Drah’s I love it, reminds me of my family in Maine, I’m from Texas! Nice use of jigs!!! I learn something every time i watch you work!!! My Clamps are heavy to!!! Merry Christmas to you and yours and Happy New Year!!!

@3x3CustomTamar 2 жыл бұрын

Haha thanks! You too!