How To Make Daredevil's Club

No video

How To Make Daredevil's Club

Рет қаралды 14,446

Күн бұрын

It today's video, I am going to be showing you how to make Daredevil's three way Billy Club from Disney+ Daredevil series, formerly a Netflix series. This build is simple and easy to make, all of the materials were picked up from the hardware store. With Daredevil coming to the MCU, I have been foaming at the mouth to build his club, but I had to plan on HOW to make his club exactly like the tv show. It took some time, but I think I got it!
Check out my Amazon affiliate shop!
www.amazon.com...
Materials and affiliate links:
2, 3/4ths inch PVC pipes, about 14 inches each: amzn.to/3T0XNmR or Home depot
1, 3/4ths inch male adapter: amzn.to/3SEI9hm or Home Depot
1, 3/4ths inch female adapter: amzn.to/3RUXQjn or Home Depot
2, half inch PVC plugs: Home Depot
2, 3/4ths inch coupler: www.homedepot....
Screen mesh for windows: www.homedepot....
Cord: amzn.to/3T0YXPf
Plastidip: www.homedepot....
Red Spray paint(You can use any red you want, I used Montana Cardinal Red): amzn.to/3EiGNnV
Silver spray paint(You can use any silver you want, I used Montana Outline Silver): www.dickblick....
Black heavy body acrylic paint: amzn.to/3e8559y
Tools:
Drill: amzn.to/3EjdLET
PVC cutter: amzn.to/3e8aEVw
Foam brush: amzn.to/3ElO2LN
Wire cutter: amzn.to/3yjU2B5
Music is from StreamBeats
Some of those links are affiliate links and will give me a percentage of the sale if you make a purchase. It helps out the channel greatly!

Пікірлер: 47

@SenoFire 20 күн бұрын

Daredevil best video 🎉🎉🎉

@LockProps 18 күн бұрын

Thanks!

@JDJohnston9906753 Жыл бұрын

using screen mesh to make the diamond pattern on the foam=low key brilliant

@LockProps Жыл бұрын

Thank you! Hope that will be helpful to someone out there!

@vengeance2082 7 ай бұрын

You should make the blades of chaos

@LockProps 7 ай бұрын

Thanks for the suggestion! That’s definitely a cool prop!

@skaicash69 4 ай бұрын

This is brilliant! I've been trying to decide what to be for Halloween, and seeing this has given me inspiration

@LockProps 4 ай бұрын

Thanks! Happy crafting!

@thatonemexicant8989 Жыл бұрын

I just realized I can also use the screen for the suit to get knitted look.... Tank you so much!! You got so much talent please don't waist it

@LockProps Жыл бұрын

That is a great idea! Hope that helps with your build! Thank you so much for the kind words, I got a lot more videos coming soon!

@mrwayne14 Жыл бұрын

Damn bud... Those Billy clubs are amazing.... What about the daredevil helmet??? I want a full DIY series of daredevil cosplay(suit included) if possible?

@LockProps Жыл бұрын

Honestly, I would love to try and make the rest of the cosplay! Just depends on how long it will take for me to get through the rest of the videos! Glad you enjoyed them!

@ragemuffin7427 5 ай бұрын

That’s so sick

@LockProps 5 ай бұрын

Thanks!

@geek_industries Жыл бұрын

Sooooo clever. I need to so this!!!

@LockProps Жыл бұрын

DOOOO IT! If you do, I'd love to see the finished product and you can tag me on any social media!

@markginimalanaphy8963 Жыл бұрын

Pretty neat 😎👍

@LockProps Жыл бұрын

Thanks!

@kcclubkirby Жыл бұрын

Nice work! 😀 It looks awesome!

@LockProps Жыл бұрын

Thank you so much 😀

@kaitlynblaylock8744 Жыл бұрын

Love this build! Definitely took some creative thinking, but you figured it out and man does it look great!

@LockProps Жыл бұрын

THANKS LADY!

@joeleboeuf Жыл бұрын

@@LockProps You're certain that you couldn't have gotten smaller pipes than that?

@LockProps Жыл бұрын

@@joeleboeuf Sure, you could go smaller, but when I was looking at reference photos, that seemed like the right size to me.

@joeleboeuf Жыл бұрын

@@LockProps Understandable.

@LockProps Жыл бұрын

@@joeleboeuf Oh I forgot to mention, I also looked at a couple of licensed replicas and those were the lengths I mainly based it off of. But I had to make some adjustments due to the pipe caps and the twist connector.

@TheEpicAzn Жыл бұрын

Do you think you could make the Zombie Breaker from kamen rider Geats? I’m a new sub and I love your vids so far, keep up the good work dude👍

@LockProps Жыл бұрын

That looks like a crazy build! I will want to watch the series to really understand how it looks in the show and what it does fully. Maybe in a future video? We will have to see! Thanks for watching and subscribing!

@joeramosiii7778 2 ай бұрын

Is it possible to make this without a belt sander and dremel? It looks amazing and I would love to make this one day.

@LockProps 2 ай бұрын

I guess you could with sandpaper, but honestly, that would be way too much work to follow it exactly like mine where you can open it up three different ways. But I HAD to use the belt sander for the Nunchaku section. The belt sander was also vital in sanding down the adapter pieces that had too much material or had extra things on the sides. If you just did the two PVC pipes and the twist connector, then that would work!

@LockProps 2 ай бұрын

Hope that helps!

@joeramosiii7778 2 ай бұрын

@@LockProps Thanks for the info! I really appreciate that. Can’t wait to make it someday.

@wonder7071 Жыл бұрын

I watched your katana video and wanted to make that but cosplay foam isn't available where I live so can you suggest an alternative

@LockProps Жыл бұрын

Maybe not cosplay foam, but if I was in a situation where I didn't have that, I would be looking for gym floor mats like this: amzn.to/3D5kNvX Downside is that you would have to sand down the side that has a pattern, I did this when I first started. Then if I didn't have that, then I would go to my local craft store or hardware store and find a piece of wood that is around half and inch thick so you can be able to cut out the shape of the sword AND be able to sand down the sides and it will also be very lightweight, I believe Birch is one that is pretty light. If I was on con crunch and needed to get something out ASAP, then I would work with cardboard, I know it's not the sturdiest of materials, but it is widely available and can shape, glue, and cut out with ease. I hope this helps out! Side note: it is currently Halloween time, so I would also say maybe to go to a nearby Halloween store and maybe check out what they have and then repaint it!

@evanlabar7851 6 ай бұрын

Which parts does it separate on

@LockProps 6 ай бұрын

It’s divided in 3 sections, one middle piece and two red bars one bar is hollow that holds the string and stopper, then the other side is just twisted into place and when it detaches the middle part stays on the other side with the string.

@M0Z3US 4 ай бұрын

I definitely need to do this I am going to a comic con and wanna cosplay as daredevil and I would rather not spend $100+ on his billy clubs

@LockProps 4 ай бұрын

Try it out! I just hope they will allow that prop in. So maybe send an email to the con to see if you can! Would hate for you to make it and then not be able to take it in!

@M0Z3US 4 ай бұрын

@@LockProps it says on the thing that you can have plastic and foam props

@LockProps 4 ай бұрын

@@M0Z3US Great! Glad that worked out!

@mattfokken1840 Жыл бұрын

How much for the cost in materials?

@LockProps Жыл бұрын

If I am just going off of the materials, not including the tools I used, I’d say the cost was roughly $50-$60. The most expensive thing was the spray cans I used, you can get whatever kind of paint you want, but I do like Montana spray cans so I paid extra for those colors.