How To Make DIY Arduino Mini 3D Printer From DVD Writer

Рет қаралды 438,297

4 жыл бұрын

Hello Guys, In this tutorial, I am going to show you how to make a DIY Arduino 3D Printer using DVD writers. So let's get started :)
Please subscribe ❤️ and turn on notifications! 🔔 bit.ly/2WlyA8Y
Thanks For Watching
✅LIKE ✅SHARE ✅ COMMENTS✅ SUBSCRIBE
Parts List:
(banggood.in)
1) Arduino Mega - bit.ly/2WlrgMa
2) Ramps Shield 1.4 - bit.ly/2WmRFcs
3) A4988 Motor Driver - bit.ly/2qTjFJc
4) Extruder Module - bit.ly/31VOae4
5) Hotend Module - bit.ly/2WlH69C
6) Endstop - bit.ly/34foLO3
7) Stepper Motor - bit.ly/2PyWGx4
8) 12V 5A Power Supply - bit.ly/34h6HU1
9) DVD Writer Slider - (Broken DVD Writers)
10) 6mm Acrylic Sheet - (Offline Store)
11) Wooden Block - (Offline Store)
11) Spiral Cable - bit.ly/2MVdCw4
------------------------------------------------------------------------
Circuit Diagram: bit.ly/3f4Y57M
Code : • Arduino 3D Printer Pro...
Frame Dimension: bit.ly/3g2zpOz
----------------------------------------------------------------------
More Arduino Related Project
1) Arduino Voice Controlled Car - bit.ly/2WUdsuR
2) Arduino Bluetooth Controlled Car - bit.ly/2WpYPuX
3) Arduino Line Follower Car - bit.ly/2ZimqPV
4) NodeMCU WIFI Controlled Car - bit.ly/2XA941d
--------------------------------------------------------------------------------------------
Contact me
Facebook: / surajit.majumder.165
Instructables: www.instructables.com/member/...
twitter: / diybuilder1
Instagram: / diy.builder
------------------------------------------------------------
🎧 Background Music
Track: Pink Sky - Amine Maxwell [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Pink Sky - Amine Maxwe...
Free Download / Stream: alplus.io/PinkSky
Track: Coffee Dreams - Le Gang [Audio Library Release]
Music provided by Audio Library Plus
Watch: • Coffee Dreams - Le Gan...
Free Download / Stream: alplus.io/coffee-dreams
-------------------------------------------------------------------------------
#Arduino3dPrinter #ArduinoProject #3dPrinter

Пікірлер: 339

@reececrook7021 4 жыл бұрын

that moment when the music starts and you think "oh shit its one of those videos" then you watch it and instead of being obnoxious its calming and instead of fast hot glued mess its wood, screws and easy to follow with measurements

@DIYBuilder 4 жыл бұрын

glad that you liked it

@Zigzag-k 3 жыл бұрын

Print Benchy or 20x20mm Cube and make another video lets see the quality and accuracy ???

@sanchit826 4 жыл бұрын

FINALLY, a tutorial that is not only easy to follow but the end result also looks great.

@retrohd1_ 3 жыл бұрын

I’m watching this video because of this comment!

@MaxC_1 3 жыл бұрын

being honest there's much more detailed tutorials with just as good or better stuff out there but this definitely is a great one overall for sure

@daviddidas4266 2 жыл бұрын

@@MaxC_1 are you having a Link to a better one? Well im having a 3d printer but im want to give it to my son an build one by myself

@shanzagr8za 3 ай бұрын

@@daviddidas4266 hi did you manage to make it ??plz share your experience is it actually worked...

@heinrich-peterhimmelbauer1418 4 жыл бұрын

Thanks for Your efforts and inspiring video. I do have 3D-Printer, but making one small for better understanding what is going on there is the right project for the coming (cold) season.

@TylerDurden404 4 жыл бұрын

if you been using a 3d printer for a while now and done mods to it, and modify the firmware then you already should have a strong grasp of what is going on..

@lurkingcorsa10 4 жыл бұрын

you're right bro, lets begin from something simple 'n small evenly..

@Aasishsapkota2059 4 жыл бұрын

i love the video if any other background tone is being used i had been iritated whilw listining to this tone

@gsms5846 4 жыл бұрын

THIS IS THE BEST VIDEO

@covertpluto 4 жыл бұрын

When you hear this kind of music and think it’s another fake or horrible project, and then see it’s got screws and not glued together

@RicardoFiorani 3 жыл бұрын

LMAO

@Laikalks 4 жыл бұрын

At last super project video. Thankx bro

@DIYBuilder 4 жыл бұрын

thanks bro

@NoamLevys 3 жыл бұрын

Great video! I need to know what is the minimum height from the Z axis to the heating bed while building this machine. I don't understand how to position the top 2 axes (both of them need to be in the middle + the Z axis need to point towards the base axis which is also need to be in the middle?) I'm freaking out ! lol

@mohamadzarka9920 4 жыл бұрын

Video cleaner and more organized about( DIY 3D printer ) ... I liked strongly and I will implement it .. Waiting for the second section on connecting electronic parts

@DIYBuilder 4 жыл бұрын

thanks and second part is coming soon.

@mohamadzarka9920 4 жыл бұрын

@@DIYBuilder waiting foron the warmest of embers

@siddharthsinghkiryal2082 4 жыл бұрын

You really make some interesting stuff with arduino

@DIYBuilder 4 жыл бұрын

thanks bhai

@ohmawasthi 3 жыл бұрын

right!

@a.sanusinazareth9213 2 жыл бұрын

GREAAAAAAAAAAAAAAAT PROJECT! YES!

@KARMA-gw2qt 4 жыл бұрын

I really like your videos because you upload your codes and diagrams in mediafire or PDF file like that so it's very easy to find and understand

@DIYBuilder 4 жыл бұрын

Glad you like them!

@yasinbarca4649 4 жыл бұрын

hey, thanks for nice video, i follow all your steps and i was buid my small 3d printer, now i wanto try x-y-z but its not working correcly, stepper is making sizzle and going to hot, also i cant import any stl file on pronterface and i cant manage bed size on prontface its not possible because inactive

@hamidankeke1489 4 жыл бұрын

I like your project 😘😘😘👍

@paktoysreview8377 2 жыл бұрын

great ideas

@38911bytefree 4 жыл бұрын

Nice project. Not all DVD ROMs or CD are worn drive. Many use CC motors. Precise movement is not required on CDs or DVDs since the final adjust the lens are able to move in Z and X (just a bit, but enough the make the fine adjust)

@abuhafss1 4 жыл бұрын

Nicely built.

@DIYBuilder 4 жыл бұрын

Thanks :)

@Artnovetor 3 жыл бұрын

Muito bom parabéns 👏👏 t

@kien3848 4 жыл бұрын

That's totally awesome dude ! Love u man 😘

@SmartTronics 4 жыл бұрын

Awesome bhai

@raushankashyap1482 4 жыл бұрын

This is to awesome...

@DIYBuilder 4 жыл бұрын

Thanks Bro

@gaziesen5052 Жыл бұрын

Is the print area size according to the shaft length of the stepper motor?

@sanjaykumarprasad326 3 жыл бұрын

This video is super inventive and that's all but release second

@thegamecreator3270 2 жыл бұрын

nice project but i have a doubt, can we buy the hotend holder or 3D print it or can we just fix the hotend to the Z axis?

@muhammadalihamja290 3 жыл бұрын

Amazing!!!

@ajahar94 3 жыл бұрын

This is a beat video good job keep it up bro

@DIYBuilder 3 жыл бұрын

Thanks 💯

@johnayap6861 4 жыл бұрын

background music makes me wanna make love with the printer.... hhaha... very nice video..

@dipuometuel6806 4 жыл бұрын

careful with your thoughts hahaha!!!!!!

@user-mi6ht9lm1n 4 жыл бұрын

احسنت عمل مبدع👍👍👍

@mlardizabal1976 4 жыл бұрын

Hello do you have measurements for holes en parts?

@1999memin 4 жыл бұрын

Could you tell me why did you use different wood dimensions?

@vivekmadke3832 4 жыл бұрын

First viewer and liker

@DIYBuilder 4 жыл бұрын

Thanks Bro

@divyanshuagarwal20 4 жыл бұрын

Can we use wood instead of acrylic sheet? And what are the dimensions of the wooden blocks??

@enriqueavila9760 4 жыл бұрын

Hi excellent proyect, but why you don't share the wooden zize and the high of the screw holes

@Genesis-kv1ze 3 жыл бұрын

Is there is any problem in using12volt 2amp power supply

@fashubh4277 8 ай бұрын

Hi can we use 200 or 100 v smp used for bigger printer will it be fine? Pls tell me

@iamZairul 4 жыл бұрын

Good video.ty bro

@DIYBuilder 4 жыл бұрын

thanks

@TewaAya 4 күн бұрын

Good for the tinniest of details. I just need mine 3mm thick for pla casting.

@elijahwasmuth7122 3 жыл бұрын

I can’t tell if that is a part cooling fan at the beginning part of the video, but I think to get better print quality you need a fan that points towards the print or a fan that goes through a duct to cool the prints

@DIYBuilder 3 жыл бұрын

Actually the Z motor gets pretty hot so i added the cooling fan for this.

@YashPanchal 3 жыл бұрын

at what height should i mount the top plate and hot tip module ? (please help me )

@KCCheng 3 жыл бұрын

HI, I try to build a similar 3D printer. Driver the whole system with PC/ATX 12V power. I found the stepper from DVD will become too hot (I did clamp the max current of drv8825 driver) !! The working voltage is probably only 5V. If I drive the system by 5V, it will not move. Do you have similar issue ? How do yo fix the problem ? Thanks.

@joelmichaeljrbeduya374 3 жыл бұрын

I have just read that there is a slight difference between DVD player and DVD writer but can I still use a DVD player for this project? Hoping for your response. Awesome video by the way. Thanks for sharing such amazing contents.

@shanzagr8za 3 ай бұрын

Did you manage to make it plz let me know I am thinking to make this for my uni project

@scharkalvin 4 жыл бұрын

I'm guessing I can also use old CDROM drives too.

@randyorton06 3 жыл бұрын

just buy stepper motors thats like extra $30 and save yourself from pain

@lurkingcorsa10 4 жыл бұрын

mantap....👍👍🏽

@TECHnoman753 3 жыл бұрын

6:28 Fly: Hey bro, whatcha building?

@karthickm3585 4 жыл бұрын

Excuse me sir .the marli firmware program movement setting why the default axis x=114.70 used in printer what is .70 please answer me sir

@user-nb4kh3zn6t 11 ай бұрын

Excelente video un fuerte abrazo 😎🫡

@syedanwarulislam8191 4 жыл бұрын

Simply outstanding bro carry on. Please share the code as soon as possible. I'm going to make this one.

@DIYBuilder 4 жыл бұрын

Thanks

@gamalnaser6449 4 жыл бұрын

Can you tell us how long is all wood

@anhtuannguyen7570 4 жыл бұрын

can you give more information about the size of wood blocks?

@kathanpatel8081 10 ай бұрын

Such an amazing project Can we make other 3d print model by this?

@davidcarrizales5052 4 жыл бұрын

Good Idea! 🤖

@DIYBuilder 4 жыл бұрын

thanks

@itzztilen Жыл бұрын

Hello, This is a very nice project but I have few problems. I would be really happy for you to fix them. So basically when I programmed my Arduino and tested it I only had X and Y motor controllers in ramps 1.4 and didn't had the Z motor controller and extruder. Basically then I added them and Z coordinate Motor (DVD Rom drive) Started overheating and every motor controller started overheating too. Please tell me what to do and thanks if you answer👍😁

@NarutoUzumaki-bj8ni 3 жыл бұрын

How to add a lcd display to this project Any changes in programming

@PunakiviAddikti 4 жыл бұрын

I hope that frame and bed are perfectly square, or you won't have much luck with too much or too little first layer squish.

@diybibro1903 4 жыл бұрын

awesome bro.. just speech less.

@DIYBuilder 4 жыл бұрын

Thanks bhai

@floriankrauss 4 жыл бұрын

I strongly recommend to connect the PE at the PSU!!! Otherwise u have no protection over the RCD

@DIYBuilder 4 жыл бұрын

Thanks for the suggestion

@atrontetra5611 3 жыл бұрын

Can you elaborate pls? Not an electrical engineer here

@floriankrauss 3 жыл бұрын

@@atrontetra5611 the risk of being injured by high voltage is mostly covered by an device called RCD or residual current device. However, this device can only work when the ground wire is connected at every point of the case or housing aswell as the RCD itself.

@atrontetra5611 3 жыл бұрын

@@floriankrauss thanks

@bezelelb3774 3 жыл бұрын

do i have to adjust the current limit on stepper driver.

@kashobsaha4433 4 жыл бұрын

Good job brother

@DIYBuilder 4 жыл бұрын

thanks bhai

@ronak.vgamer5250 4 жыл бұрын

Nice bro

@DIYBuilder 4 жыл бұрын

thanks bro

@haroonkhan9375 Жыл бұрын

get alots of help for make this project

@shanzagr8za 3 ай бұрын

Hi did you manage to make it plz share your experience??????

@raahimirfan5996 4 жыл бұрын

What is the difference between the shield used in this video and the CNC Shield V3...? Thanks!

@andersstromqvist2211 4 жыл бұрын

cnc shield 3 are for cnc machines, ramps are for 3d printers. The biggest difference is that ramps can handle the hot end and a heated bed and have inputs for thermistors. cnc machines dont have use for that equipment. the ramps ar for the mega 2560 and the cnc shield for the uno

@raahimirfan5996 4 жыл бұрын

@@andersstromqvist2211 OK... Thanks a lot!

@r4rony666 4 жыл бұрын

Nice project

@DIYBuilder 4 жыл бұрын

Thanks

@SmartTronics 4 жыл бұрын

Cool

@DIYBuilder 4 жыл бұрын

thanks bro

@BlackWarriorLesnoy 4 жыл бұрын

cool!

@DIYBuilder 4 жыл бұрын

thanks

@alfarosiarsita 3 жыл бұрын

What type of dvd writer is that? Standard pc internal dvd drive?

@dakidsksksk Жыл бұрын

Dude plz help i have a dvd player can i still use it though plz respond

@gsk1595 3 жыл бұрын

Vaa wt a music 👌

@hussnainali1394 4 жыл бұрын

Phone par kaun se 3D model se banaen

@abdellahmeskine823 4 жыл бұрын

hello dear i want to ask you for programmation arduino can you give kink for programmation my arduino thank's

@alkamishra9340 3 жыл бұрын

pls diy builder reply what is the lenght breath and height of wooden block

@adrycough 3 жыл бұрын

6:29 how do you not notice there's a fly crawling on you lol

@gamalnaser6449 4 жыл бұрын

I need to know how long is every wood to make it perfect like you plz answer me

@wilsonmarroquin4299 4 жыл бұрын

Amigo i did the base already but do not is the same way the more important is find the electronics 🤖🤖🤖

@NarutoUzumaki-bj8ni 3 жыл бұрын

Link In discription

@johnrichards3235 4 жыл бұрын

Hello, the materials listed for purchase to build printer, what are the prices in USA dollar? Is there a way to convert the prices on the web site or app?

@DIYBuilder 4 жыл бұрын

yeah you can do this in app setting

@wmss8581 3 жыл бұрын

Can we use extruder motor as cd drive motor.

@electronic7979 4 жыл бұрын

Excellent project 👍 I like it

@DIYBuilder 4 жыл бұрын

Thanks :)

@martinpanev6651 4 жыл бұрын

Great video! Inspired me to make my own! Normally I dont like these kinds of videos but you make them great! Keep it up.

@DIYBuilder 4 жыл бұрын

Awesome! Thank you!

@tomimedina2105 4 жыл бұрын

Can I use a supply of 12V 10A?

@SmartTronics 4 жыл бұрын

Hum Romeohackster 😁

@chloemcholoe3280 4 жыл бұрын

you should add a part cooling fan

@alexlee5543 3 жыл бұрын

Can anyone knows why the cd player isnt moving. Ive made the printer the temperature is fine extruder and stepper motor is all fine but the cd player isnt moving

@ericthymotius8192 4 жыл бұрын

Does the dynamo on the CD ROM indeed become hot when operated?

@atrontetra5611 3 жыл бұрын

I saw some others put a fan under those

@harviengenga 4 жыл бұрын

Hi,can i know the measurement of each wooden block. I'm stuck on that,help me.

@harviengenga 4 жыл бұрын

@Sameh Sinani Nop,they didn't gave

@harviengenga 4 жыл бұрын

Sameh Sinani yup,I continue with my own design and measurement

@harviengenga 4 жыл бұрын

Sameh Sinani Tqtq...how about you?

@samouflage99 4 жыл бұрын

Hi. I don't know if this is what you were looking for, but in the description of the video it features a "Frame Dimensions" link that shows the measurements.

@donnabarrett2158 3 жыл бұрын

5:26 wait.. did u 3d print the bracket to make a 3d printer... so frist thing u need to make a 3d printer a 3d printer.

@javiermendozarocha1065 6 ай бұрын

Good

@rohanv5728 4 жыл бұрын

Can I use l298 motor driver for this? And if I can will the code change?

@aaditya9030 3 жыл бұрын

no bro from my experience L2938 can't handle 12v 5amps

@MrRvdbeek 4 жыл бұрын

Nice I will trying build one of my own

@DIYBuilder 4 жыл бұрын

Thanks

@tamilamvesamv5425 3 жыл бұрын

How to making a gravity increasing meashion

@havanlong1426 4 жыл бұрын

good

@HobbyRoom 4 жыл бұрын

Cool project bro. waiting for part 2 🙂

@therecycle1332 4 жыл бұрын

here is the kzfaq.info/get/bejne/d9CGkq6CmLPYk4k.html

@koneko_chan_w Жыл бұрын

リール台は作れそう😸

@silvas1030 2 жыл бұрын

Legal 👍👍

@karthickm3585 4 жыл бұрын

hi sir actually i do this printer in your reference video but i have used my stepper motor driver current is 0.35 and my axis is working but i click the print button my printer is fastly run and x and y axis is suddenly run and stop ........what is your default axis#define DEFAULT_AXIS_STEPS_PER_UNIT { 80.70, 80.70, 164.70, 93.80 },and my acceleration #define DEFAULT_MAX_ACCELERATION { 350, 350, 350, 10000 }..........which value is used in this axis and acceleration .....

@1999memin 4 жыл бұрын

hey, can you tell me wich is teh distance of the "y" base from "x" base thanks