How To Make 3D Printer at Home

How To Make 3D Printer at Home | Arduino Project

Рет қаралды 5,248,987

5 жыл бұрын

How To Make 3D Printer at Home | Arduino Project
::::::: Want To Buy Writing Machine For Your School or Science Project ? ::::::
Watch Below video to Buy New Writing Machine or Parts From me.
• Writing Machine Robot ...
WhatsApp on 7698915121 to place order of above link writing machine.
Buy prototype PCBs at ALLPCB
www.allpcb.com/P13
In this video, I make DIY 3D printer using Arduino Kit and stepper motor. Using this 3D printer you can make any object using gcode file from your computer. For making this you need to install cura , xloader and pronterface software.
This project can be use as your college Project in the science fair.
In this video, I introduced all parts that I used to build my Homemade 3D Printer and complete Build Process of Arduino kit.
Best Link For Materials (World)
3D Printer Arduino kit goo.gl/7s97da
Hot end goo.gl/g34WCN
Extruder goo.gl/syE4sV
Stepper motor goo.gl/VC5zan
12 Volt 10 Amp Power Supply goo.gl/owVopR
PLA Filament goo.gl/BMPu4p
Best Link for Materials (India)
3D Printer Arduino kit amzn.to/2TEnH5I
Hot end amzn.to/2TDUlo5
Extruder amzn.to/2Oay9vz
Stepper motor amzn.to/2XVddgG
12 Volt 10 Amp Power Supply amzn.to/2Y3QhMc
PLA Filament amzn.to/2HqK2gp
Music :
Track : Disfigure - Blank [NCS Release]
Watch : • Disfigure - Blank | Me...

Пікірлер: 2 100

@olivercordingley776 5 жыл бұрын

first DIY video i have ever seen that doesn’t use tedious amounts of hot glue

@1dusty1 5 жыл бұрын

Yea

@VoidWays 5 жыл бұрын

just cold glue

@iyer928 5 жыл бұрын

Yes

@OneBallRyan 5 жыл бұрын

Still managed to use a syringe thing though. Lol😂

@EMILE12345678901 5 жыл бұрын

hotglue would have been much better, this fucking idiot use superglue or contact glue on stepper motors, that's just insulting

@danielm4874 5 жыл бұрын

Then use the thing to print out a bigger 3d printer

@Dubswitcher 5 жыл бұрын

Either your avatar is overused or I see you everywhere

@user-vn7ce5ig1z 5 жыл бұрын

> Then use the thing to print out a bigger 3d printer That's called a RepRap.

@Dubswitcher 5 жыл бұрын

@Frank Blackcrow - That's why you print multiple peices and then attach them together.

@bryanbortko2695 5 жыл бұрын

Woah lol😯😧😧

@danielm4874 5 жыл бұрын

@Frank Blackcrow shut up nerd it's a joke

@iluvtacos38 3 жыл бұрын

Everyone watches DIY videos but never makes them. XD

@thChannel-kv5qw 3 жыл бұрын

95% aren't make but 5% wanted diy projects to watching videos and making

@funnimations7628 3 жыл бұрын

I made this. Gotta say, pretty impressive!

@SAM-is5uo 3 жыл бұрын

Maybe

@mohdjailaniadam9165 3 жыл бұрын

well i do stupid

@mohdjailaniadam9165 3 жыл бұрын

@@funnimations7628 you what now!

@rumikadissanayake5417 2 жыл бұрын

Imagine you make this printer, then from this printer you print out the parts for a bigger printer, then from that you print parts for a bigger printer until you can print like a 1 meter wide project. That's innovation. Anything done by your self is the best cause you know its all your effort and hey, CUSTAMIZATION POSSIBILITIES ARE ENDLESS!!!:p Edit = thanks for providing links to stores in india mate, really appreciate it. :)

@neerajnarwal9558 2 жыл бұрын

that is exactly what i am doing. 🤣

@assertchris Жыл бұрын

At a meter, the use of glue and inaccurate measurement of parts is likely to produce a large printer that breaks down quickly and doesn't create accurate prints.

@werner1 5 жыл бұрын

That electrical wiring gives me the chills! Interesting build!

@jackstephen2519 5 жыл бұрын

Loving that “this copy of windows is not genuine” notification

@mrepicpant 5 жыл бұрын

Jack Stephen i’ve definitely gotten that on real copies of windows before but my guess is that’s not the case here lmao

@simoiiskola4158 5 жыл бұрын

Yeah, I actually laughed out loud 😂

@jamesraynor9114 4 жыл бұрын

Adds a little genuineness to the diy

@dasjulian3 4 жыл бұрын

I got scammed about a windows product key. Now the key is locked and I can't even get a new one

@nicksgarage8295 4 жыл бұрын

7:46

@fishtankhaver 3 жыл бұрын

Honestly, I will never try to do this 3d printer at home, BUT, this video is still freakin' amazing.

@user-oz4pm2yz3i 3 жыл бұрын

You're right.

@JuanMendez-zv5qd 3 жыл бұрын

Why?

@dasig3010 2 жыл бұрын

@@JuanMendez-zv5qd its only good for building trash

@cosmothecat8626 2 жыл бұрын

@@dasig3010 wdym im confused

@unimprezzedmclastname4220 2 жыл бұрын

@@cosmothecat8626 I mean, it's got pencils and drinking straws for the axis guide rails. Those are going to bind like crazy. It's an acceptable 3D printer if you've got literally nothing else but whatever you washed up on a deserted island with, but you could get an i3 kit for less than this junk printer's BOM. Oh, and the i3 would give you a heated bed and a print area larger than a postage stamp

@snowsnow8037 2 жыл бұрын

Pure genius I hope your craft! Keep it going! 😌👍🏻👍🏻

@channelexclusive8240 5 жыл бұрын

When you need a 3D printer to do your own 3D printer LOL

@BikerMage 5 жыл бұрын

Worked for me.

@chrissetyanwar 5 жыл бұрын

Haha, ide yg bagus. "Membuat printer 3D dengan printer 3D."😂

@0Leitwolf0 5 жыл бұрын

Yeah you need things from. D3 Drucker to make a mini 3d Drucker very nice

@DaleDev 4 жыл бұрын

Yeah

@-r4inb0wzz-35 4 жыл бұрын

@@0Leitwolf0 *3D printer kein deutsch bidde 😜

@aircoolbro21scndling49 4 жыл бұрын

The world needs more people like you.

@souravpaul4642 4 жыл бұрын

Best project i was planning to buy profetional one but its so simple to make u made me understand ...Youre awesome man

@atticusyong2927 Жыл бұрын

Can we take a moment to appreciate how easily he makes it look?!?!?😃

@Inventor_ic 5 ай бұрын

😂

@pixyfirestudio3848 5 жыл бұрын

Caption should be like : *How to Assemble a mini 3d Printer*

@notagarbage6728 3 жыл бұрын

Question : how to make a 3d printer ? Answer : purchase a 3d printer then disassemble it. then again assemble it and bingo! you have a new 3d printer . Oh enjoy 😊👍

@sword013 3 жыл бұрын

yeah ._.

@stevecummins324 4 жыл бұрын

If possible it's better to assemble extruder, so spring has a cap bolt pushed in one end. Then a bolt through the extruder arm, pushes into the cap bolt. Allowed spring tension to be adjusted.

@rayson6068 Жыл бұрын

Yes

@amoswanjala7670 Жыл бұрын

Astonishing then make a mind controlled drone🎉🎉😊

@penguinscanfly5796 Жыл бұрын

this guy is so talented!! i still cant believe he managed to finish it in under 8 minutes and 30 seconds!!

@wolvesgaming8973 Жыл бұрын

Might make designs to 3D print a printer parts using my 3D printer then just buy the motors and stuff 100x100x100 ❤ Love this video

@ShafiurRSajid 5 жыл бұрын

*Thank you Bro I really searching youtube to make this* 😃😃😃😃

@Inventor101 5 жыл бұрын

Amazing Iove you design really nice mini printer good job I bought parts to make my own mini 3D printer🙃👍👍

@oliviergoggins 5 жыл бұрын

Whats the total price?

@cubersorbit4818 Жыл бұрын

Is it working ?

@engineerlawalhamzatademola4267 Жыл бұрын

Were you able to complete it?

@solimansayed6934 Жыл бұрын

youtube.com/@newmuslimss

@imhi_ 3 ай бұрын

No please don't do it

@tregayden8251 4 жыл бұрын

I think it’s awesome👏🏾👏🏾👏🏾 really want to make it

@oundhakar 4 жыл бұрын

That was fantastic!

@justdarian 2 жыл бұрын

I like how he uses 3d printed designs to make a 3d printer

@GoofyCOD Жыл бұрын

You know he puts alot of effort into his channel when he works up until 5 am

@Mrpurple75 3 жыл бұрын

Congratulations on getting such a machine to print, may I have such luck

@aumari5034 Жыл бұрын

Thank's man, I really wanted this!

@almostanengineer 3 жыл бұрын

This is the second random 3D printer made from scrap I’ve been suggested today 😳 KZfaq knows I’m broke 😅

@pakistanshakargarh8157 2 жыл бұрын

kzfaq.info/get/bejne/fZhxZbZ5sdSyn4E.html

@aashayhadke7979 4 жыл бұрын

Thank you Creativity buzz!!🙏🙏 Without your help we (our group) can't be able to complete our project.. although it was very fun and challenging task.. but we have managed to do so...all credit goes to you.. Much Obliged💯💯

@baruwaola7458 2 жыл бұрын

Aashay.. Please how do you do the programming or conversion of the file to HEX file

@RahulYadav-ie5oe 2 жыл бұрын

Can you tell the code you uploaded in Arduino by xloader

@RahulYadav-ie5oe 2 жыл бұрын

@@baruwaola7458 did you get the code ?

@shayangamer8335 Жыл бұрын

Can you send the Arduino programming part?????

@user-tx2jt4oc7r 8 ай бұрын

Disculpen alguien me podría decir los materiales

@YASHRANA7407 2 жыл бұрын

My hands just pushes my fingers with +Mesomeric effect to like your video⚡⚡⚡

@ginaanamilenavanegassoler4394 4 жыл бұрын

Esta super cool, eres muy creativo :D

@sumeettech27 5 жыл бұрын

*bohut bohut hard....👍👍👍👍💥💥💥🔥🔥🔥💗💗💗*

@riddhiktilawat1270 3 жыл бұрын

We need a 3D printer to make a 3D printer!

@jayarathnajayarathna9062 4 жыл бұрын

wow......!.it"s amazing. like for me

@ibrahimalbahrani3035 3 жыл бұрын

Awesome 👌 Great ideas 💡 👍

@beyondcode_ 5 жыл бұрын

There is no description or any details about the measurements.. If the measurements are provided it would be good..

@vikrantgoyal4096 3 жыл бұрын

I agree with you

@JosephStalin-hv8en 3 жыл бұрын

Ya your correct bro

@ankushdeyclass4broll279 3 жыл бұрын

Me too

@dineshwarsogra2932 3 жыл бұрын

Bhai pehle jo videos mei likha aa raha hai vo padlo

@xaxey 3 жыл бұрын

Ya right

@eldontyrellcorp 5 жыл бұрын

Fantastic project but most people would not be able to do it. Anyway, you proved it can be done :)

@CreativityBuzz 5 жыл бұрын

Yeh

@SciHeartJourney Жыл бұрын

As Picard might say, "nicely done". 👍

@myherotechnoblade8940 Жыл бұрын

tysm, I can't believe that it was so easy to find this specific channel . thanks to youtube!

@KSGaming45 Жыл бұрын

Is this easy?😂

@bidyut_chakraborty 5 жыл бұрын

And dude, common you skipped the main parts, programming of the aurdino, aligning of parallel stepper motors, intricate designing of parts.. I wil give a better option. 1. Buy a 3D printer. 2. Open it up. 3. Turn on your camera. 4. Assemble it. Taaddaaa home made 3D printer.

@mauricepower6361 5 жыл бұрын

Also, the parts in the description add up to over $100. You can buy a mini 3D printer on Amazon for $200 (which you might need anyways to print parts for the shitty-inaccurate-undurable printer you're about to make). Won't be surprised if the life cycle for this one is less than 1/4 of the commercial one. Glue? Are you kidding me?? GLUE??????

@loleq2137 5 жыл бұрын

@@mauricepower6361 wise words.

@suyitnumahrus9261 5 жыл бұрын

The problem with FDM 3D printer is stability.Buy the cheapest one available and build a sturdy frame and you will get decent printer

@oscarvillada6281 5 жыл бұрын

Give this man a bud please 🍺

@skypowergb3842 4 жыл бұрын

but you cant take off parts from 3d printer and programm it to be robot or something else

@Shadow-rl8cu 3 жыл бұрын

Buy kit and parts at 80% price of Real 3D printer, do crappy frame, reduce print size by a lot, pay for extra materials (not included in 80%). LEGIT

@rafaelconceicao8437 2 жыл бұрын

BIY, buy it yourself KKKKKKKKK

@superboyfes8426 3 жыл бұрын

Thank you for this video, is very interesting

@wendolenbalterado Жыл бұрын

best D I Y 3d printing thanks for showing it god bless you best making i think i can make it 😊

@luisangelnova2792 4 жыл бұрын

Yo hice la mía basada en tu modelo, me quedo muy parecida (por no decir igual), gracias, desde hace ya casi un año, con ella imprimí las piezas de una impresora de 500 x 500 x 500, y ando a la espera de que me lleguen las partes metálicas, de nuevo gracias.

@yeison-s7972 2 жыл бұрын

Hola amigo me puedes decir cuánto te costo ..la lista de piezas y dónde comprarlas

@luisangelnova2792 2 жыл бұрын

@@yeison-s7972 todo lo compro por AliExpress, pero inicialmente me tocó hacer como en el video. Cosas pegadas, y rodamientos incrustados en acrílicos.

@tecamac3781 Ай бұрын

@@luisangelnova2792 oye amigo yo igual la ando haciendo, justo empecé, me podrías pasar las medidas que utilizaste porfa?

@LuisAlbertoBetancur 5 жыл бұрын

*CUTTING (DESIGN IN DESCRIPTION)* ??? Where??? .

@LostInfernoFireDragon 5 жыл бұрын

Yeah I would like to know where the cutting file is at.

@LostInfernoFireDragon 5 жыл бұрын

@@MrKritterh thanks

@benphillips2947 5 жыл бұрын

Don't build this. The incomplete parts list in the description adds up to around $100 by itself. You can get a real 3D printer like the Creately Ender 3 for like $150.

@miguelc5430 5 жыл бұрын

Ben Phillips where at? In amazon their going for about 230 US dollars

@lurodlr32 5 жыл бұрын

@@miguelc5430 check out xvico pioneer on ebay, they are about 140-150 and seem to be a pretty solid ender clone, I've watched a few reviews on them and they seem to be decent for the price.

@jaydeepdave4510 3 жыл бұрын

It's an amazing work 👌👌👌👌

@pabeio 3 жыл бұрын

Woah! Pretty nice bro!

@covertpluto 3 жыл бұрын

For the stepper drivers, use something like TMC2209 to not have to wire up endstops

@ArquimedesOfficial 2 жыл бұрын

Nice tip!

@grimreapybones2875 9 ай бұрын

Wish I knew what you are talking about but since the video is such a garbage tutorials I didn't actually learn anything about how 3d printers work and building this 3d printer is gunna be a pain ans probably coz so many unexpected problems that I'd have to give up and have wasted money on the parts

@H3R7Z 5 ай бұрын

It's not a garbage tutorial. You just don't know what you're doing. This video is meant for people who are in this field.@@grimreapybones2875

@Nobody-bh9ew 4 ай бұрын

@@grimreapybones2875kzfaq.info/get/bejne/p9uSaMaZ3q-1YKc.htmlfeature=shared

@hyperhektor7733 4 жыл бұрын

this is the best of the DIY mini printers since it has larger XY- space (z is not so important. But i think this can be done with one motor on the Y axis . (when you change the geometry, i mean 3-4 bushings instead of 2 , and the driving motor in the middle) If you are missing some parts, here some ideas: The Steppermotors can be fount in defective printers. Belts+Pulley can be found in Scanners. Couplers can be made from hose or shrinktubing and the 8mm rod could be realised with a 8mm metric rod + nut instead

@hamzajamal5661 2 жыл бұрын

Hi, I think printers use normal DC motors instead of stepper motors. And yes a single motor on the y axis could be a really good idea.

@vinayakonimani7628 2 жыл бұрын

@@hamzajamal5661 stepper motors are used to immediately change directions, which happens specially when u are printing something like a circle. Normal dc motors may run at their max rpm and switching directions is hard here. Although you can convert a stepper to dc motor and vice versa, its a pain.

@grimreapybones2875 9 ай бұрын

Just wish the was an actually good tutorial on how to build this You know, with a person, explaining things and properly showing everything and giving information

@kojire 8 ай бұрын

Bro, z is not important when it comes to homework writing machines, but this is a 3d printer, so z is important

@AbdulMoiz.Entertainment 5 ай бұрын

I am made this 3D printer and i am so happy you are not understand but i feel so happy Thanks for this helpful video!...

@kai_oppabammaibam7900 3 ай бұрын

how about the code ?

@stantheman4443 Жыл бұрын

"Impressive Most Impressive" well done.

@muruganvelu9222 5 жыл бұрын

Thank you for making it . I ask you to do this

@KissImre 4 жыл бұрын

Hi, I have a question. Is there a drawing with the dimensions of the 3D Printer? (eg.: the wood component) Thank You the answer!

@azharjawed8874 2 жыл бұрын

No answer sadge

@whiteink1924 Жыл бұрын

Its in the description

@noahthibault642 4 жыл бұрын

that was really cool

@manishbhagat8437 3 жыл бұрын

This guy is a genues you are a legend bro

@gabrielfajardo6750 5 жыл бұрын

Congratulations.!! You Have a new suscriber😉😉

@CreativityBuzz 5 жыл бұрын

Thank you.

@luisangelnova2792 4 жыл бұрын

I made mine based on your model, I stay very similar (not to say the same), thanks, for almost a year now, with it I printed the parts of a 500 x 500 x 500 printer, and I am waiting for that the metal parts reach me, again thanks.

@flavioportugal519 3 жыл бұрын

Excellent project!!!

@zortraxtheprotogen881 3 жыл бұрын

Cool levelling!

@ykgammer6689 Жыл бұрын

any types of stepper motor can use to make a 3d printer

@SANJAYsubbarao 4 жыл бұрын

It looks pretty nice to do but I think it's too hard for me to afford those components

@okuratnywidz3196 Жыл бұрын

Very interesting idea and cheap project, I must think over this project because very wanting to have this printer at home :)

@richardquispe7395 3 жыл бұрын

You are amazing. For those who want to know further details about this project go read the description of the video. I'm subscribing

@nicholassummerlee6843 3 жыл бұрын

All of printer: Wood, hot glue and plastic Extruder: High end all metal... I seriously laughed. Awesome build.

@Lampadina_17 3 жыл бұрын

no. its just clone of e3d v6. you can buy on amazon for around 15 euros

@aldrinrebera8718 4 жыл бұрын

Bro can we pause the print and restart when required.

@amanjyotiborah8252 3 жыл бұрын

What a project .. 👍 ..

@twilightsparkle5670 3 жыл бұрын

MIND BLOWINGG

@Sysaphys 4 жыл бұрын

This is the strangest video I have seen in quite a while. You go out of the way to purchase stepper motors and bearings, rods, power supplies etc etc and then proceed to use pencils and pen caps, 3d printed parts and needle tubes?

@romulofernandesevangelista5694 3 жыл бұрын

Hey man, nice video! Is there any way we can get a more detailed explanation on how to upload the file to the printer?

@nawafgamerz8114 2 жыл бұрын

he showed in the video

@nightcorealg5765 2 жыл бұрын

He used an usb cable

@farmterminator4777 Жыл бұрын

What soft ware are you using? Marlin, Klipper, Rep Rap.ect

@caespok Жыл бұрын

un muy buen trabajo y muy buen video

@alexart5851 4 жыл бұрын

0:22 to made 3d printer … i must have 3d printer … 🤔 …hmmmmm …but if i have 3d printer … why i need DIY 3d printer !? The secret of humanity …

@maikshow 5 жыл бұрын

Show the project but you should put a file with diagram, code, assembly. Just watching the video do not give to ride

@tasinxd2078 3 жыл бұрын

Bro, this printer is awsome!💕

@pakistanshakargarh8157 2 жыл бұрын

kzfaq.info/get/bejne/fZhxZbZ5sdSyn4E.html

@dylandowdy3687 4 жыл бұрын

Nice build!

@cavejohnson1710 4 жыл бұрын

Me: mom can I have 3d printer? Mom: no we have a 3d printer at home. 3d printer at home:

@jameskoitsky3526 4 жыл бұрын

I laughed my ass off at this

@dhakshingk 3 жыл бұрын

I asked my parents for one, but I said I could use it for my electronics GCSE and take it to university to use

@Blargaldalien 5 жыл бұрын

Wooden components, and humidity.I wonder how long it would remain level?

@amarshrestha3870 5 жыл бұрын

simply print its own parts and keep replacing LOL !!

@johndecembre25 Жыл бұрын

Wow 👌 👏 😍 👍

@stoyandechev1381 3 жыл бұрын

very cute smal and funny projeck .. i like it :)

@rogerschrager3589 5 жыл бұрын

Nice project. Dimensions would be appreciated.

@xzkjerry8576 3 жыл бұрын

Watch me you will know another level.

@ashwinirudraksha2402 3 жыл бұрын

@@xzkjerry8576 yeap bro I know you have make lot of things from wood right! And love it bro

@maquez650 5 жыл бұрын

"Hey how we gonna mount that stepper motor? " "yeah no, just glue it to some wood, that will do"

@briandawkins7108 4 жыл бұрын

i dont want to watch this video but its so godamned good i cant stop

@FantaBH 3 жыл бұрын

Well done bro, I am surprised and amazed. huge like .

@ashwinirudraksha2402 3 жыл бұрын

Yeap

@hiero9358 5 жыл бұрын

I love how it yelled how hes windows is legit...

@rossyboi712 4 жыл бұрын

Lol didn't notice that

@shakithhussain8505 5 жыл бұрын

Bro please upload to how to make a normal printer

@abubalo 5 жыл бұрын

I think that is rubbish tutorial, without any reasonable explanation.

@dhanakodimani4783 5 жыл бұрын

I made one for 30k

@vishalgaurav4411 5 жыл бұрын

@@dhanakodimani4783 I can make in 10000

@dhanakodimani4783 5 жыл бұрын

@@vishalgaurav4411 top end. Tmc driver + 32bit + much more

@vishalgaurav4411 5 жыл бұрын

@@dhanakodimani4783 oh bro, may be you are pro. I just had a normal build using ramps. BTW, what's 32 bit ?

@LumineMain64 2 жыл бұрын

I might try this myself

@rishonwalder404 3 жыл бұрын

Wow! Super Cool 😎

@m_to_the_s1050 4 жыл бұрын

Which app do you use for the leveling ??

@gwenrobinson674 2 жыл бұрын

It’s a default iOS app

@plcerider6502 5 жыл бұрын

So... You make a 3d printer using 3d printed parts

@mauriciocardosoarruda1331 4 жыл бұрын

really

@jakobpeschke1760 4 жыл бұрын

not stonks

@pradeepkale7873 3 жыл бұрын

🤣🤣🤣🤣🤣🤣

@machinze_edits 3 жыл бұрын

This is simple and elegant than other 3d printer design ! Just like Newton's law of Gravity ! What do we need more ! Thankx bro 👍🏻👍🏻😎

@shakhen.8180 Жыл бұрын

Nice 👍.

@CharmanderFanCharFan 5 жыл бұрын

There is no explanation so I rather buy a made one

@3dartstudio007 5 жыл бұрын

With this McGuiver printer, you could "print" better parts to make a larger and more sturdy 3d printer and re-use the stepper motors and controller.

@hyperhektor7733 4 жыл бұрын

thats the plan :D

@ayyanmian1311 4 жыл бұрын

What price of printer?

@Adoreil2234 9 ай бұрын

bro took diy to next level

@microsoftsarker 7 ай бұрын

Thank you for this.

@shresho2817 3 жыл бұрын

The moment when you realise the motor is used as just a cutting surface and cutting the syringe on the motor didn't had any measurement purpose😂

@jameslamb7197 5 жыл бұрын

TONY STARK BUILT THIS IN A CAVE.

@Honest-King 5 жыл бұрын

Lmao

@sampatton8504 5 жыл бұрын

"I'm not Tony Stark."

@Harry-is6vn 5 жыл бұрын

WITH A BOX OF SCRAPS

@Reedyngaihte 5 жыл бұрын

@@Harry-is6vn with a bunch of animal bones

@p3chv0gel22 4 жыл бұрын

If tony stark would have build this in a cave, it would be so Advanced, if it would be just a bit smarter, it would write a book...

@gaminglive422 3 жыл бұрын

the best thing I have ever seeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeen