Am i the only one who watched till the end just to see if he was gonna try and put that thing on a real firearm?

The rebar hacksaw was the coolest part of the video😎🤘🏻

Anyone else waiting to see it blow up???

A moment of silence for all the people who thought this was intended for a real gun.

Im 57, and my father made them from a Briggs and Stratton lawn mower mufflers, basically the threading back then was the problem the muffler already came threaded, but, they worked better than the ones you can actually buy

I started playing paintball in 1986, back then we had to make all of our own accessories, I made silencers exactly like this. They worked well for paintball, I would never try them on a real firearm.

Oil filters make great silencers...The longer the quieter...The female threaded inlet, will fit specific threaded nipples...You secure the nipple to your piece, I silver soldered mine, on an HP .22, extended barrel, after removing some of the sleeve, over the barrel...It's cast or pot metal, melts easy too, so be careful...Then just shoot the first round through for the end hole, and you have a replaceable silencer...Sounds like a cap gun...Longer filters even quieter...

I love foreign films. I can't wait to see the one where it melts. 🙂

Beautiful work as usual. Works very well with high pressure gases like n-gas, etc. Absolutely love your design. Nice work. +1 a chamber inside a chamber with inlets.. for which the gases will go into as the projectile passes w/the high pressure gases directly behind it.. this works in physics. nice work. A+

Disposable muffler, what a great idea !!! Rock Wool is great for sound reduction. Used in sound deadening applications.

I made one similar about a year ago for a cracked barrel .22 air rifle. It works damn good for squirrels, rabbits, and raccoons.

It's actually amazing with some effort how effectively can silence lots of stuff , just for short use probably can make fairly effective.

I like the concept of using whatever you have or can buy at the hardware store. The design is kind of like a glass pack muffler, doubt it would reduce the decibels much. I do like your hacksaw frame built from rebar.

Now I MUST make one of those... rebar hacksaw!!

Great idea but those materials will almost surely melt and/or catch fire at much above a .22lr when exposed to repeated, rapid firings (note there was no attempt to validate its capabilities in actual use). The most fragile suppressor material I've yet to see is aluminum; there's a valid reason.

Ang galing, salamat sa pagbahagi at may paggagatayahan ako

galing ah..pwede na yan ipa order sa mga may kursunada budi..

Tri bolt I remember now,the actual thread cap was steal, the spring loaded locking divots were brass,as the paint came off and we were able to see the yellow brass color anyway again very cool

Magaling trabaho! This is how the NPA & HUCKS make silencers.

It’ll work on a 22 caliber if you shoot bullets below about 1100 fps. The hardest part would be keeping the tube perfectly straight, in-line with the bullet travel. Keeping the bullet from making any contact with the inside tube, deflecting it. Perfect alignment could be a problem with an inner tube that small. Bullets over 1080 or 1100 fps you’d get a secondary boom coming from the bullet breaking the sound barrier.

Super 👌

It is probably worth mentioning that civilian firearms are illegal where this dude lives. All they got over there are air guns, and most of them are home made. This is a tutorial on how to build a suppressor for such a gun. If you believe putting one of these on an actual firearm is a bad idea, you a correct. It is.

This guys going to put SilencerCo out of business.

I like the dual use of his tools.

Prescription pill bottles the kind that can snap together clear orange colored with holes drilled in center, insert scotch brite or steel wool wrapped around a pencil which is used as a guage for hole size electric tape and super glue them as a monocore baffle inserted into a maglite flash light body for the can.. tightly wrapping duct tape on the end of 22 barrel so the can fits really tight when put on and as long as you dont mag dump a ruger 10-22 all you really hear is the reciever ejecting the casing but if you rapidly empty your mag its only good for about 4-5 rounds then heats up and fudgea up alignment and you're monocore pill bottle baffle is done,, of course this is all hypothetical and ive nwver made a surppressor for a ruger 10-22

This design could be improved by making more room for more of the media(cotton or something synthetic?) and changing it to fine steel wool, which would last much longer.

Who ever thinks this would quiet a 22 lr sub is dead wrong this original style needs a center tube baffle slightly larger then bullet caliber, needs an end cap, the stuffing between center baffle tube and can should be steel wool lathered up with bearing grease and pvs tubing doesn't hold sound worth a crap..

Nice share dis video

I've got a damn pellet gun in .177 cal and that sumbich is LOUD! Louder that all of my 22LR's for sure. Only 1 pump and CRACK... which kinda sucks LOL. I think it's about 1,300 FPS which is more that common 22LR but it's close in either case. I think THIS item would suit it very well and I may try something similar to this as I think it'll work fine for an air rifle. Nice little tutorial vid and like many others have stated, killer rebar hacksaw!

Awesome. I don't know about using it as a silencer but I will make one but use it for a barrel shroud. Thank you.

Apparently designed for use with a water pistol.

Ayos idol ganda

Yeah the plastic would melt upon firing on a real gun. I made mine out of aluminum. Works great, but I'm going for steel next. 👍🤠💯

Hell, empty water bottle and steel wool works real good,too. For a 22.

Ganda idol

I would like to hear it on a 22LR and how much difference it makes.

ATF : PVC PIPE IS A FIREARM

I have a .22 MAG with threaded barrel. Maybe I'll throw something together like this and see if it makes it any quieter. Cool DIY!

Muy bien hecho pero tienes que probarlo

Thee old bare foot clamp .. haven’t see that in years😊… but for real. Man your dope ✊🏽💯

How many shots can you fire before the plastic melts?

For sweat kind of gun is that suppressor? The barrel looks too big

First off...ONLY way it wouldn't explode on first shot is if ONLY USED ON A .22LR. Then there's not going to be any appreciable sound reduction overall because it's open ended. Need a wipe or cap to trap the gasses or it'll simply be a redirection device. The sound may be attenuated from the shooter's perspective but that's only because it was redirected.

Despite all the "Call of Duty" commandos' negative opinions this thing could work. It is OBVIOUSLY not designed for AR15 heavy combat! Too bad that in this context it cannot be tested.🤣

Am i the only one thinking this is gonna melt snd likely catch fire?

Looks like a silencer from a 1970's dirt bike

Its a cute novelty item.

Great thank you!!!!!!

Thanks for the heads up...wont waste my time...

The feds are drooling over this one lol😂😅

I'm digging his hack saw

The barefoot and home made rebar hacksaw. I'm dead. 🤣

Just hit the play to see the airsoft toys. Is the a sprinkler?

Suppressor for what? A nerd blaster?

(6:34) Some say, Sam Worthington after watching this, built one on the same day Peter Jackson cast him for the role of Jake Sully (J'ache Sooly). Some say...

For a 22. Rifle A 20oz mountain dew bottle filled with 00# steel wool and duct taped over the barrel would "probably" work really well, especially with Subs. Don't test this idea!! But remember it

that's cool bro, i'm curious if you could add more baffle, or an end cap, i guess you could tape over the end and poke a hole,

Good..

Fedboiz would like to thank you for clicking on this video. Your interest has been noted. Huzzah!

ok lets talk about the rebar hacksaw .that could make money.

I did something like this (not as detailed as this one) and it worked for the first shot. I didn't secure the dampening layer (I used sponges) and on the 2nd shot it all went flying out. Told myself I'd try again but just got busy with other stuff. Also my module was twice a thick and probably a 15" long.

What air gun is this most effective on? The Benjamin bull pup?

Im just here to say hello to my fbi agent. You doing good? Remember, if we must talk pls dont shoot my dogs.

A cap on the end drilled out over sized and a tire repair patch rubber cemented on the inside as a wipe would probably compliment the look completely

Really love the colour. At least you're getting views! And that's the main thing these days. All the best.

Nice idol ingat lagi god bless

No, I did too. Was curious to see how quiet it was going to be. And to see I how it would handle the heat. 🤔

I bet 22 Lr would be ideal for something of those materials regardless that's pretty darn Cool

I don't think that would hold pressure. But you can engrave your form 1 number with a pocket knife....

galing Idol

Hell that Smurff, thing won't last 🔵🔵🔵🔵🟦🟦🟦

Think this would be more effective on the end of an exhaust pipe than on a weapon.

Ok So.... When is the next "Im on A N O T H E R FKN list" Meeting? Remember ALCOHOL TOBACCO FIREARMS ...AND EXPLOSIVES!! their Guidelines Not ours🤣

Might work on a .22. Right?

Use stainless Brillo pads to take the heat away

But how effective is it?

I want to see it in action!

Yes I was waiting for the demo. Ive always felt that the hardest part to a silencer was getting the extended threaded barrel. Where do those come from?

Show de bola.

ATF reading comments and saving addresses 😂

This is hilarious, this has ATF undercover alphabet. Boys written all over this channel

Sabali talaga ti ilocano...adu diskarte na agannand ka lods

besides being illegal, would this not melt..?

Absolutely uses. Just wasted 9min. Without taking Sound decibels BEFORE & AFTER installation, why even try it & watch.?

Is that for a super soaker?

Good idea for urban air guns if you can't find one for your rig.

For airsoft right?

PVC gets really pliable when you ad heat, gonna act like an al dente noodle when it gets hot. We used to use a simple plumbing torch to make our own bends in electrical conduits

Good imagination fun build

Still think it would be interesting on let's say .22 caliber or so. I wonder how much it reduces the sound. Great build though.

Is ther a test video Wher it get used?

There's 8 minutes I'll never get back😅

This item would best be used on a slam fire shotgun. Paint it Black and put it on the end. I think that might just be a nice little adjustment.

I actually saw something similar built from plumbing hardware. It was entirely ineffective.

WHy do I get the feeling this would be like holding on to a big old firecracker saying watch this

Back in the day made them out of 2 or 3 liter bottles would work for a couple shots they would make a gun with power quite

Personally, I prefer a plastic Coke bottle duct taped to my barrel.

another thing take the plastic cement and heave that out the yard and try some Rockset

If your gun has a threaded barrel just use a oil filter

At close distance there is no crack of the faster long rifle bullet breaking the sound barrier.