No video
How to Make Hot Rod Exhaust Baffles / Mufflers for Side Pipes
Рет қаралды 49,594
Күн бұрынThis is a short video on how I built a set of baffles for my side pipe exhaust on the 1929 Ford Roadster hot rod. The result produce a decent sound and a quiet exhaust while testing in the shop. You can you the same idea for exhaust systems between the frame rails.
Subscribe to my KZfaq channel at / 1929fordhotrod
Please visit my website at 1929fordhotrod.com for more great hot rod build ideas.
Like me on Facebook at / 146153025450971
Follow me on Twitter at / 1929fordhotrod
Subscribe to my RSS feed at feeds.feedburne...
@AddictedtoProjects 8 жыл бұрын
Hi There! Just wanted to say thank you for sharing your experience openly on KZfaq. I've just spent 2 hours trying to find this kind of info, because I am building a straight through Harley exhaust, and I've been wrecking my brain on how I can quieten it down a bit without impeding gas flow too much. This design is brilliant!! :)
@1929fordhotrod 8 жыл бұрын
+mictho100 -- Thanks for your comments. This design can be modified with a choke valve and drilling a series of smaller holes in the donut rings so you could go with quite with the value closed to flow through with the valve open. I intend to incorporate this into the exhaust for my Corvette. Good luck with your project.
@GradeABeaf 6 жыл бұрын
Im trying to do the same on a Shadow 1100, funny how we both ended up here. Did you ever come up with a design, or find more info?
@oz_medias 6 жыл бұрын
Cool, narration sounds like Dick Proenekke of Alone in the Wilderness.
@clipofthedayyup4907 8 жыл бұрын
love it. great video. I am a sport bike enthusiast. not your typical annoying road going sport bike person mind you. I was looking for ideas to hell with my current exhaust. I found two ideas. yours and another that I may use either or combine to get the sound level and type off sound desired. thanks
@carchemistryinc2992 8 жыл бұрын
Have you tried Car Chemistry Inserts? They sound like open headers only quieter, without losing the quality of sound or performance. Rather than losing power, you can gain some!
@1929fordhotrod 8 жыл бұрын
I have looked at your inserts and they do look fine. I believe my design is less restrictive with a larger opening and incorporates back pressure to reduce the noise level.
@freeidaho-videos 3 жыл бұрын
It has been 6 years by now. How are these mufflers working out? I have studied everything available to the public on muffler / baffle design and found this approach very interesting. I haven't seen anything else like it. Thank you!
@1929fordhotrod 3 жыл бұрын
These baffles are working out nicely with a great sound.
@vanillashake2 10 жыл бұрын
If I wanted to scale this down, are there certain proportions I should follow to get adequate noise cancellation without too much back pressure?
@1929fordhotrod 10 жыл бұрын
You could make the baffle shorter or even use 2" pipe instead of the 2.5" pipes and drill the donut rings with 0.25" holes. Another idea would be to use half moon shapes and alternate the orientation of them throughout the pipe. I did this many years ago inside a 3" stainless pipe on a 70 Chev with a SBC with good results. .
@vanillashake2 10 жыл бұрын
Thanks for the information. By the way great instructional video too.
@1929fordhotrod 10 жыл бұрын
vanillashake2 Good luck & make sure your baffles are removable for adjustments to sound output. Thanks for the good feedback.
IronTrap Garage
Рет қаралды 14 М.
Dennis Kirk, Inc.
Рет қаралды 335 М.
DriveOnLeft
Рет қаралды 104 М.