How To Make Inside Cuts On Sheet Metal By Hand

Рет қаралды 19,315

5 жыл бұрын

How To Make Inside Cuts On Sheet Metal By Hand:
The "How To Make A Metal Project Enclosure" video answered how to make outside cuts on thin sheet metal and this video (inspired by viewers) has been made to answer the questions of How To Make Inside Cuts On Sheet Metal By Hand.
For more info on marking up:
Bending sheet metal video - • How To Bend Sheet Meta...
Metal enclosure video - • How To Make A Metal Pr...
------------------------------
PLEASE SUBSCRIBE AND CLICK THE BELL!!!
------------------------------
DRIVE by Dj Nicolai Heidlas @nicolai-heidlas
Music provided by Free Music for Vlogs • Video
------------------------------
WARNING:
This video for entertainment purposes only. If you use information shown in this video or attempt to repeat anything in part or whole, you do so at your own risk. Remember your safety is your responsibility.
------------------------------
BREAK IT TIL YOU MAKE IT!
Thank you!

Пікірлер: 31

@TheJimtanker 4 жыл бұрын

Break it till you Make it. I love your motto. I've been living by your motto for years and didn't even know it.

@wiz3905 Жыл бұрын

Thank you good metal cutting & bending videos. I'm a novice who hates wasting materials. I have 2 old PC cases I want to covert to more modern with better air flow & some RGB Fan Bling 🐒

@CandidZulu Жыл бұрын

I have a hand powered nibbler that is very useful for something like this.

@Lee-haw 4 ай бұрын

Subscribed 👍 Because of the great explanation

@alivespiral 3 жыл бұрын

Brilliant clear and concise videos. Løve them thanks. ☀️

@typhoonrider3733 4 жыл бұрын

Thank you. Very helpful tips 👍

@regthebackyardjackofalltrades 3 жыл бұрын

Thank you very much for this. I am making several outdoor sheet metal boxes for my paint and oil cans. With the pandemic I’m loosing a lot of space in my home and building stuff at the side of my house. At this time I’m thinking about making an outdoor tv box for an old tv. I was thinking about wood but the weight will be exponential so I decided of a combination of both. The stand with wheels to roll out of the way and a box for the tv. I’ll be using rivets and rivnuts. I’m in the process of learning the order of operations for the bends but would like to see if someone has thought about this? Thanks

@lizzitremayneauthorandequi6127 3 жыл бұрын

Love your vids! Thanks!

@josron6088 Жыл бұрын

Thanks. I would have never thought to use a chisel.

@libertus8924 Жыл бұрын

Does anyone know what size rectangular ducts are needed for a 420 square foot 3 room addition? It has a separate furnace, 24 foot straight run and six 6" side vents. I got 8" x 16" supply rectangular ducts but haven't installed them yet as I'm not sure if they aren't too big.

@sureshgopi8024 Жыл бұрын

Metal punching is good for get good finish

@Elvisrivers1 3 жыл бұрын

Is that weldable steel ? Looks like you cut that with ease with the sheets. Aluminum?

@VoiceOfAsh 4 жыл бұрын

Great video! Would you recommend using a Dremel with a cutting wheel?

@Elvisrivers1 3 жыл бұрын

I have spent over $100 on trying to make a flat 5x7 piture frame with the border being 5/8 in. all around. Using Dremel and cutting wheel. Cut about 10 and can't use any. I am pissed. Gotta keep buying sheet metal pieces too and more cutting wheels. Gotta try something else now. Any suggestions?

@JohnLee-bf2ux 3 жыл бұрын

How to cut small rectangular holes in a sheet metal box for something like electronic switches ? Without a power drill

@lizzitremayneauthorandequi6127 3 жыл бұрын

Chisel like in the vid. NOT with your good wood chisels!

@toasega 2 жыл бұрын

Watch here for both powered and non-powered hole cutting tools: kzfaq.info/get/bejne/jq9ooreEx926h2w.html

@jtbmetaldesigns 5 жыл бұрын

They do have metal working chisels which of coarse can be sharpened

@cosador 5 жыл бұрын

Alternatively, a piece of rod could be sharpened. Tools don't have to be for the particular task, expensive or store bought to be successful. Thanks for the comment.

@SybilDefense Жыл бұрын

Trying to make quail feeders in the most ergonomic (less waste) fashion

@dhimanbobby1 4 жыл бұрын

Nibler is best for sheet metal cutting

@sharonmyde718 3 жыл бұрын

How thick is the metal? 1mm?

@junding5948 5 жыл бұрын

How much thickness of the sheetmetal in this video you cutted?Normally using the technique the video showed,how about the maximum thickness?

@cosador 5 жыл бұрын

The thickness is 0.55mm Zincalume sheet. It would be more difficult to cut anything much thicker by hand without creating deformations. Thanks for watching!

@rok1475 2 жыл бұрын

Do you have a clever method for making double D holes? I can’t justify spending $$$ on a punch and filing is not fun at all…

@neelo420 3 жыл бұрын

wait a minute he told green is left and red is right but his shears are of yellow colour

@frunkfrankly 2 жыл бұрын

I believe those to be the straight cutting type.

@Elvisrivers1 3 жыл бұрын

I have tried to cut a flat picture frame ou TV of weldable steel. Very thin...maybe 16th of an inch. Using Dremel and cutting wheels. So far 10 useless frames. Can't get perfect cuts. Th ed wheels wobble..and you can't get in the corners. I have spent over $100 on wheels and pieces of sheet metal. The borders are 5/8 " all 4 sides. HEELLPPP!!

@toasega 2 жыл бұрын

Try this: kzfaq.info/get/bejne/jq9ooreEx926h2w.html