In this video i will be reviewing a universal battery capacity tester and energy monitoring device that can be used to test capacity of any battery or monitor energy between any DC source and DC load.
This product is easily available on online stores and comes in two variants that is 180 watts and 185 watts.
The detailed specifications of this device is provided below:
➽Compatible with discharging and aging testing of various USB chargers, various power bank mobile power supplies, various battery and battery capacities, various power adapters and other power supply equipment voltage, current, power, capacity, power, temperature, discharge resistance, time-limited discharge settings , Stop voltage setting and other parameters and operations
➽The advantage of the four-wire system Support 2-wire system）, the voltage measurement is not affected by the voltage drop of the wire, and the voltage is more accurate when used to detect the battery The 2.4-inch high-definition wide color screen interface design enjoys a different color visual experience.
➽Discharge can more accurately stop the discharge and protect the battery. The internal use of high-power large discharge tube discharge test, summarizes hundreds of large-scale; instrumentation circuit principle and evolutionary extraction, all major advantages are integrated; discharge aging, a screen full of multiple parameters , The test is convenient and fast, and the function is strong!
➽Easily test various data such as voltage/current/capacity of various lithium batteries/batteries, continuous load discharge aging test, adopts intelligent temperature control fan design, built-in large discharge tube, greater power More reliable, test the overall capacity of the battery, use time, aging performance
Product Parameter
Test voltage：2~200V
Working current：0.2~20A
DL24P Discharge power: voltage * current less than185 W
(The actual running current is limited by the maximum power, please adjust the current according to the law of energy conservation)
1. Overload protection
2. Overcurrent protection
3. High temperature protection
The built-in over-current, over-temperature, over-power safety protection functions, if the protection interface is popped up, please pay attention to the parameter adjustment, shall adjust to the maximum power, and then discharge, you can first slowly and smoothly adjust the preset value in the start and discharge, in order to adjust up to the maximum power for discharging.
If you have enjoyed this video, then please subscribe to my channel where i will be uploading more interesting videos related to electronics and Radio link.
Also watch my other interesting videos on KZfaq:
1. The Ultimate 18650 Lithium Ion Battery Charger and Capacity Testing Station | TP4056 | ZB2L3 HW-596
• DIY Lithium ion charge...
2. Spot Welding Machine for 18650 lithium ion cell using Cheap Chinese module | DIY | Homemade
• How to make Spot Weldi...
3. 18650 Li-ion Battery Capacity tester for lithium ion batteries using ZB2L3 Module | 4k video | HW586
• How to make lithium io...
4. Spot Welding Machine for 18650 lithium ion cell using 12v Battery Failed | DIY | Homemade
• Spot Welding Machine f...
5. How to make a 20 Amp LM2596 DC-DC Buck Converter | Step down Converter | MOSFET |
• How to make a 20 Amp L...
6. How to make 12v Auto Cut Off Battery Charger | Power Supply | Charge Controller | Boost Converter
• How to make lead acid ...