How to make Mini Powerful Table Saw

Рет қаралды 911,580

4 жыл бұрын

（Materials required）配件表
555 Motor 马达 bit.ly/30Mti9H
555 Motor Bracket 马达支架 bit.ly/2NHeOE7
GT2 pulley 30T Bore 5 同步轮 bit.ly/2obBBxl
GT2 pulley 16T Bore 3.17 同步轮 bit.ly/2o30zib
GT2 timing belt 同步带98mm bit.ly/2nueyNN
Optical Axis 110mmX5mm光轴 bit.ly/2lZcFZc
5-5mm Coupling 联轴器 bit.ly/2o5mPrH
HSS Circular Saw Blades 60mm Pore diameter6mm 锯片 bit.ly/2nrkSpt
Diamond Cutting Discs 60mm Pore diameter 6mm 金刚砂切割片 bit.ly/2PDiqHK
PMW motor controller 调速器 bit.ly/2YOWpHX
5.5DC Jack DC插座 bit.ly/31vKP5J
PCB Prototype for $2(Any color): jlcpcb.com/
Thanks for watching！

Пікірлер: 508

@DUIofPhysics 4 жыл бұрын

A table saw that doesn't cost an Arm and a Leg... Just a Finger and a Thumb!

@miIitaryminded 4 жыл бұрын

id give this comment two thumbs if it wasn't for this table saw.

@madbalalaikaa 4 жыл бұрын

in the shape of an L on the forehead

@DUIofPhysics 4 жыл бұрын

@@aaronclark4959 you're not that wrong, however if you had a small guard on this it would be very good. Especially for metal and circuit boards. It would certainly be better at said tasks then a jigsaw...

@satibel 4 жыл бұрын

@@aaronclark4959 or know the bloody thing is dangerous and take precautions. it's fairly good for small stuff where a jigsaw or a dremel isn't ideal, try cutting a 50mm pcb with a jigsaw.

@fernsgilbert 4 жыл бұрын

@@aaronclark4959 Banggood sells something similar that too without any safety guard.... kzfaq.info/get/bejne/jKh5grCAtquWdGQ.html

@xkilo 4 жыл бұрын

it would've been handy to use while making it

@Raku777 4 жыл бұрын

Thank you for sharing. This would be an amazingly practical tool for a hobbyist that would not take much space and would not put the fingers at risk as much as a regular circular saw. You put a lot of skill into making this and it looks very well planned in its construction.

@psycholoner 4 жыл бұрын

Very nice. I might make one. Needs something to clamp it down as well as some safety measures, but real nice.

@ChrizRockster 4 жыл бұрын

I appreciate the extra little touches you did on this project, like the dust chamber, sleeving the electrical connections, countersinking etc. It would be easy to just ignore these for a hobby project but you didn't. Nice work.

@memelorddavid2938 4 жыл бұрын

Instead of using the ruler each time, id mark on the board from the saw length so you could just adjust it each time instead of measuring both sides each time

@tabcreedence6553 4 жыл бұрын

can you make a smaller table saw using this small table saw please

@nangma07 4 жыл бұрын

That would be awesome. Please please please do

@NortelGeek 4 жыл бұрын

Ooh, then he should make an even smaller saw with *that* saw!

@ChunkySteveo 4 жыл бұрын

Such a neat little table saw, great work!

@zengo1980 4 жыл бұрын

you can permanent mark the dimension on the board. None the less awesome DIY.

@GothicKittyMadness 4 жыл бұрын

idiot

@omskariyazmaraikayer913 3 жыл бұрын

Don't know if it's Chinese, japanese or Koreans. But their organized way of doing things is a lesson for us all. Excellent !!!.

@KBN102 4 жыл бұрын

These small table saws will cost you an arm and a leg if you want to buy one for doing crafts and small model projects, so cool man thanks for sharing!!!

@jparky1972 4 жыл бұрын

Pretty darn cool! You'll have an entire workshop of home made tools before too long. Maybe a subject for a future video.

@KJDOT 4 жыл бұрын

Thank you

@RowiAl-hasan 4 ай бұрын

Mang harganya berapa lokasi dimana.

@gaWalt 4 жыл бұрын

I like it! I've been needing a small saw like this to cut small pieces for some of my projects. Very creative! I'll be making my own custom toothpicks soon. No more of those commercial grade picks from retail stores! LOL! Thanks!

@tornadokat 4 жыл бұрын

This is very cool. I see some significant runout in that drill while using the Forstner bit though.

@sincerelyyours7538 4 жыл бұрын

Nice! I particularly like the variable power supply which is not really necessary as you are controlling the speed with a PWM circuit. Any laptop power supply would work.

@pyrotection 4 жыл бұрын

ohhh boy, im getting those parts. that was really cool!

@TuncayAyhan 4 жыл бұрын

@Vaultar would be proud of your soldering skills. Clean build without the use of hot-glue.

@Drxxx 4 жыл бұрын

Amazing project.. i like it

@RL-ux4tf 4 жыл бұрын

와우~ 몇주전 이런 상상을 했는데 누군가 현실로 만들어 냈네요. (구체적인 상상은 아니였지만요)

@JoseAntonio-rc7kg 4 жыл бұрын

Ótimo trabalho, parabéns!

@Zothiqueness 4 жыл бұрын

That's awesome! I will build one. Thank you for sharing.

@uncletatscreativeshack1702 4 жыл бұрын

That’s awesome!! I need to make one of these 😃

@glorianegrette271 4 жыл бұрын

Felicitaciones!!!! me encanta todo lo que tenga que ver con herramientas , le colocarìa una capucha de correr en la cuchilla para asegurarme de no cortarme. Esas manitos son muy creativas divinas!

@fabiandebasto9839 4 жыл бұрын

Excelente video !!. Solo un pequeño llamado de atención a la falta de seguridad, por lo demás está genial. Saludos desde argentina.

@catfeatherss 4 жыл бұрын

So cool! Could you make a mini scroll saw next? I need one!

@dinkleballs 4 жыл бұрын

Best Mini Saw video I’ve seen. Nice work 👍👍

@electronic7979 4 жыл бұрын

Excellent project 👍 I like it

@TheMtvdeath 4 жыл бұрын

Awesome soldering! Like!

@hobbyelectronics6630 4 жыл бұрын

Looks great for sawing PCBs. Nice video.

@stelleratorsuprise8185 4 жыл бұрын

It looks good, it was a pleasure watching this video.

@feix5800 4 жыл бұрын

I think there's a niche for it in small form factor that can fit in a drawer and low priced at around 20 USD for fine craft hobby stuff work. Table saw is really useful.

@theawesomer 4 жыл бұрын

Amazing build. Sharing on The Awesomer.

@wood3080 4 жыл бұрын

😆良いね！こういうの欲しかったんです！

@onekittyhawk63 4 жыл бұрын

Translated: I wanted something like this!

@TalkingGIJoe 4 жыл бұрын

Looks like a nice fun project!

@roadstar499 4 жыл бұрын

Very nice little design ...great for model building

@corgitokkiswoodworkshop1850 4 жыл бұрын

wow! cute and useful..! I need this one!

@MCsCreations 4 жыл бұрын

Awesome work, dude! Really nice! 😃 Question: the power supply, is it 120w? If so I guess I have an identical one here. 😊

@vaqueirosincero4359 4 жыл бұрын

MC's Creations tá OK😊😊

@MCsCreations 4 жыл бұрын

@@vaqueirosincero4359 🖖😊

@MrAriano65 4 жыл бұрын

Hola buen día, muy buen proyecto, dónde se consiguen todos esos componentes? Y cuánto dinero gastó en hacerlo?, Gracias y saludos cordiales desde Chile

@iamthetinkerman 4 жыл бұрын

You earned a sub, great work my friend!

@djsavage2421 3 жыл бұрын

You are awesome thank you so so much for this video and for being so descriptive with the measurements and everything this we easy to build because of all the work you did thank you so much!

@redrock1963 4 жыл бұрын

I think if the blade shaft went all the way through the box (the shaft mounted on bearings) with a dremel coupling on the outside of the box, it would be a lot easier to make and more versatile.

@mrmet5 4 жыл бұрын

when i saw the thumbnail i thought it was a slug on a miniature ping-pong table

@anriroze11 4 жыл бұрын

Aha, I went back to watch the thumbnail and it definitely looks like that!

@zZiL341yRj736 4 жыл бұрын

Can't unsee it now.

@LegacyThoughts 4 жыл бұрын

This is an awesome tool. This and a dremel would be the best pair of desktop tools! I want one.

4 жыл бұрын

It’s so cute! 😄

@alex-r2pi 4 жыл бұрын

@KJDOT Nice project :-) Just to mention: you missed out to link to the ball bearings and the power supply in the link list. And the bearings mentioned in the video are IMO too big. I think you rather used F625ZZ? Can you please comment on screws used and size of table top please?

@hobbyhabits2178 4 жыл бұрын

Nice work... :) I want to make one just like this.

@diyshow888 4 жыл бұрын

Awesome video as always !

@mrs.b1789 9 ай бұрын

Wow. It’s beautiful! A true craftsman. Wish we I had all those tools, knowledge and ability to precisely measure. Can I have one?

@Polecat54941 4 жыл бұрын

Very impressive build!

@janetkouma1 4 жыл бұрын

Perfect. Cost of tools to make it would be too much though. Buy a roto zip instead, maybe make a little table for it? Then you can cut ceramic tiles and make circular holes

@garrybrewster5821 4 жыл бұрын

I may not have all of the same parts, ......(but' ...I'm going to build this) THANK YOU!!! :)

@DiannaAtherton 4 жыл бұрын

No way! Love it.

@charliem.7492 4 жыл бұрын

Absolutely LOVE this.

@KJDOT 4 жыл бұрын

Thank you

@johnwayne2103 4 жыл бұрын

Micromark has tons of these miniaturized tools.

@nakkadu 3 жыл бұрын

Looks good, I think I'd like it without the motor, but with the axle sticking out so I can attach a drill to it. Would be great for cutting down the length of plastic architrave or trim.

@Knapweed 4 жыл бұрын

Nice job, well documented and illustrated. Kudos.

@7707777 4 жыл бұрын

it really works, i can see some work for it.

@sainttan 4 жыл бұрын

Finally, I can make a working diorama of the wood shop massacre of '86. :joke: XD

@sierracaladora449 4 жыл бұрын

Amazing!.... need one of those 👀👀

@user-gx1jg7mr7f 4 жыл бұрын

Great work! Anyway, I guess you should make an emergency stop button. It doesn't matter what size the device, it can do a lot of damage in case of some sh*t happens.

@KJDOT 4 жыл бұрын

Thanks for your advice

@fernsgilbert 4 жыл бұрын

Very good for small jobs... must add something for safety maybe an Acrylic see through guard.

@eldardrakeson 4 жыл бұрын

one tip, if I may - please use a contrasting text color during the video white text against your pale work area doesn't show up very well, and it actually took me several minutes to notice it was even there. otherwise, I applaud your DIY spirit.

@doogle-gf3fi 4 жыл бұрын

eldardrakeson -I’d ‘second’ this idea. I also applaud and thank “eldardrakeson” for their reasonable, useful and realistic constructive feedback which they presented in such a neutral, evenhanded, easily-understood & considerate fashion.

@bladetwister4329 4 жыл бұрын

Nice craftsmanship!

@KJDOT 4 жыл бұрын

Thank you

@mrebholz 4 жыл бұрын

A new Proxxon MINICRAFT table saw is born.

@penmuni3833 4 жыл бұрын

This is a dangerous machine. Few suggestions: 1. Clamp the machine down or make the bottom extra heavy, so it does not move flimsily 2. Put safety cover on top of the blade. 3. Put a visible STOP switch, and put the wire away from the table not across it. Good luck.

@crinick9344 4 жыл бұрын

Pen Muni good suggestions, all I could think of when I saw this was an accident waiting to happen

@PafMedic 4 жыл бұрын

Cheryl Reed Rinick ,lol..Me Too..and I Notice Those Things..Still Is An Amazing Build..Love It

@KlaasVaak59 4 жыл бұрын

Good clear video. Can you publish the size of the used planks.

@toolzshed 4 жыл бұрын

this is nice for cutting pcbs or particle board for hobby builders

@KevinLam86 3 жыл бұрын

I like how your table top looks like miniature flooring.

@MOONER49 4 жыл бұрын

真的很酷，謝謝你的視頻

@KJDOT 4 жыл бұрын

谢谢支持

@suecook8379 4 жыл бұрын

great video - pls slow down on the parts list

@hugono3938 4 жыл бұрын

as someone who uses table saws i fear kickback even with that little saw

@maxboonkittypoison 4 жыл бұрын

Awesome Saw table

@marutiroma6295 4 жыл бұрын

You are really great!

@MegaKami78 4 жыл бұрын

very good innovation .. Be careful, this machine can make you invalid by cutting your finger or inflicting a serious injury.

@davidhaney1394 4 жыл бұрын

dont be a twonk

@mountainviewturning5319 4 жыл бұрын

Great ideal 👍

@thegemini280 4 жыл бұрын

Yo! My Dude Is Nice Yo. ;-) Busted that out in a few minutes, that's imagination... :-) :-D HollA!!!

@sudeepchouhan5625 4 жыл бұрын

Good job 👍, "Sv "

@TheEntertainment47 4 жыл бұрын

oh my gosh, how cute is that...

@iamlyric5600 4 жыл бұрын

RESPECT

@sambaagabong7971 Жыл бұрын

hi sir thanks for informative video plese make video on diy scroll saw thanks!

@draco5991rep 4 жыл бұрын

Next you should build a miniature woodturning table 😂 Would be nice, even if I don't have any Idea for a practical use of a mini woodturning table.

@feralbigdog 4 жыл бұрын

there are already a number of mini lathe videos

@brucey39 4 жыл бұрын

Good buy finger. It was great knowing you. Your four buddies miss you so much .

@DrGarri 4 жыл бұрын

Make me one just like it and I'll buy it from you!!!

@sebsunda 4 жыл бұрын

Wow!! Very interesting!

@user-qe8ur5dr8f 4 жыл бұрын

Итого 1800 руб. за всё, кроме дерево) Проще уж, купить какую нибудь Мини дрель с гибким валом по мощнее!

@ryanmackenzie6109 4 жыл бұрын

Imagine the ease of cutting foods...

@GothicKittyMadness 4 жыл бұрын

Food*

@brettcoetzee2777 4 жыл бұрын

You must do your cuts with the saw protruding just above the plank for both safety and quality of cut!!!!! Please

@scellyyt 4 жыл бұрын

i would suggest maybe putting a huge red emergency stop button at the side because something tells me the saw wants to eat your finger

@SarmanTony 4 жыл бұрын

keren-keren karya kjdot ini bah

@lemonboy9yearsago760 4 жыл бұрын

Yay now my kids have a new toy thank you so much

@EasyOne 4 жыл бұрын

Nicely done

@KJDOT 4 жыл бұрын

Thank you

@septimus64 4 жыл бұрын

very cool project for the small hobbler

@PCUser1024 4 жыл бұрын

Like most things in China...workplace safety is not a concern.

@johnmimbs2110 4 жыл бұрын

its not fun if it isn't dangerous!

@immanuelkugler62 4 жыл бұрын

Please make the board on the top hight adjustible!

@Rocco85334 4 жыл бұрын

Good job so useful

@Vladimir_Ryabov 4 жыл бұрын

классная идея! исполнение супер!

@patrickperry6945 4 жыл бұрын

I can see uses for this little tool. But it is deceptively dangerous. Need to be real careful around this thing. One commenter mentioned clamping the thing down. Good idea!

@aleksandrloshatynskyi2129 4 жыл бұрын

Абалдеть ) крутая штука )

@cindiiritsky2124 4 жыл бұрын

Perfect for model railroading. Cutting ties and building walls etc

@anriroze11 4 жыл бұрын

Even for making model woodwork projects too. (for example, make a model chair before making the real size chair)

@KayJay940 4 жыл бұрын

Very nice but need a better way to change the blade. Make the whole top come off and or maybe use hinges and a latch. I might try and make this. Thanks.