How to Make Money Making Wall Art with a Cheap Desktop Laser

Рет қаралды 430,069

3 жыл бұрын

Today we go talk about How to Make Money Making Wall Art with a Cheap Desktop Laser! We will paint and burn an image on at 10x10 canvas that you can hang right on your wall when you are done. These are great to sell because they are light and easy to ship if needed and they look great!
🛑Subscribe for more: www.KZfaq.com/theedgeoftech...
🐱‍🏍Share this video with a friend: • How to Make Money Maki...
💾 Share this channel with a friend: / @theedgeoftech
Imag-R: www.imag-r.com/
Lightburn: lightburnsoftware.com/
Video Editing done by Caleb Fairres: www.calebfairres.com
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
Ender 3 V2 Amazon: amzn.to/2OA9bug
Code: 07ZGQI2J to save some money!
Ender 3 V2 Amazon:amzn.to/3qRzLwb
Code: 07GZXYYD to save some money!
10x10 Canvas from Amazon: amzn.to/3nBfXvV
Multipack of Canvas from Amazon: amzn.to/38QWDXp
Ortur Master 2 20w on Gearbest: www.gearbest.com/laser-engrav...
Ortur Master 20w on Gearbest: www.gearbest.com/laser-engrav...
Ortur Rolling Engraver on Gearbest: www.gearbest.com/laser-engrav...
Ortur Master 2 15w on Amazon: amzn.to/32UK9cv
Ortur Master 20w on Amazon: amzn.to/31SBPuG
Ortur Rolling Engraver on Amazon: amzn.to/3kgznVY
Ender 3 V2 on Amazon: www.amazon.com/shop/theedgeof...
Ender 3 V2 Directly from Creality: www.creality3dofficial.com/pr...
Ender 3 Pro on Amazon: amzn.to/2ZiBLCX
Ender 3 Pro Directly from Creality: www.creality3dofficial.com/pr...
Slice Engineering Affiliate Link: www.sliceengineering.com?p=ryresK6s8
The Edge of Tech Amazon Affiliate Store Front: www.amazon.com/shop/theedgeof...
Support the channel through these links!
PayPal
paypal.me/theedgeoftech
Patreon
/ theedgeoftech
Watch next - Ender 3 Playlist - • Luke Hatfield's Help G...
Recommended Playlist - Community Showcase - • Community Showcase
Let’s connect:
Instagram: / theedgeoftech
Twitter: / theedgeofteck
Facebook: TheEdgeofTechOfficial
----------------------------------------Credits-----------------------------------------------------------
Music by Wicked Realm
Album - No More Fairy Tales
Song - Feed
/ @wickedrealm5507
#ortur #orturlasermaster2 #wallart

Пікірлер: 672

@Nozoki 3 жыл бұрын

This dude sounds like a dj from a rock station in the 1970's when I was a kid. Play some Skynyrd!

@MrCharliejaera 3 жыл бұрын

Hahahahaha EPIC comment 😂🤙🏼

@TheEdgeofTech 3 жыл бұрын

HAHA I used to be on the radio and I own a DJ/Entertainment business too. lol

@TheEdgeofTech 3 жыл бұрын

LOL

@ChristianKolleia 3 жыл бұрын

He needs a call in number to see Kizz this next weekend.

@Nozoki 3 жыл бұрын

@@TheEdgeofTech nice. You've got the voice for it.

@MaryCartwright-cq7vb Жыл бұрын

This has been SOOO helpful, I have a ton of artwork that I've made on paper that I want to burn on different surfaces and this is the first video I've seen that shows how to do it on canvas and with color. Thank you!

@Repkord 3 жыл бұрын

You my friend have become quite the laser master these days! Nice work!

@amrannoordin1644 3 жыл бұрын

For a newbie, your videos are wonderful! A million thanks.

@tim6360 3 жыл бұрын

This is a winner. Love it. So many ideas flowing at the moment!

@teridoty4285 2 жыл бұрын

Thank you. Just unboxed my D1 a week ago. Your instruction was super solid and I'm now on my way to having my first completed "hero" piece done. Seriously great instructions!!!!!

@TheEdgeofTech 2 жыл бұрын

Awesome machine! Glad I could help!

@medic458 Жыл бұрын

Man, thank you for your video!! I’m new to engraving, rocking an XTool D1 and I tried your white canvas technique. Turned out pretty good for my first time! Thanks again!!

@daedelus_ Жыл бұрын

That's an amazing idea. Thanks for sharing the idea and techniques!

@janosvamos2172 3 жыл бұрын

Dude! Love the vid and thanks for the idea. Never thought about using canvas. This just opened up a whole world of possibilities. Guess I'll be spending time at hobby lobby tomorrow to give this a shot.

@TheEdgeofTech 3 жыл бұрын

Awesome! I hope it turns out great!

@quinettabrown8836 8 ай бұрын

This is the best I've seen yet. Awesome work. 💪🏾

@johnscustom3898 3 жыл бұрын

Wow so glad I cane across this awesome tutorial I'll be checking out your other vids!

@johnkaschak5055 11 ай бұрын

I just got a Nova 24 and you’re a life saver my friend! Thank you for sharing your content!

@johnhubbard6262 5 ай бұрын

I like that you let the paint dry on it's own terms, it's made to do that and some sheens, lusters, colors just don't develop as well if you rush it. Very nice.

@steventapp318 3 жыл бұрын

Just did this project last night and it came out excellent. Thanks for all the hard work to get your knowledge to us.

@justbeingmybestbob 6 ай бұрын

I just got my engraver, still setting up the location in my house, and you videos have just filled me with ideas!! Thank you so much for sharing these tips. Can't wait to get burnin'!! LOL

@sundeshbalraj 3 жыл бұрын

Awesome work - really enjoyed that 👌🏼

@CraigHollabaugh 3 жыл бұрын

Great topic, script, process and editing. Thanks from Colorado.

@Rood67 Жыл бұрын

Thank the algorithm for recommending this video. You have an amazing option for the lasers.

@dmaher2007 3 жыл бұрын

Great video Jim, always something cool and new. Cheers.

@TheEdgeofTech 3 жыл бұрын

Thanks 👍

@martinsmith3047 3 жыл бұрын

Great instruction videos ... Brilliant ... thanks a million

@OregonDARRYL 2 ай бұрын

Get a two part epoxy coating mix and pour it over the top about 1/16 thick.. fills the canvas grains and creates a smooth deep colored artwork. Try it... you'll like it... Make sure you level it first.

@AnthonyGriz 3 жыл бұрын

Have been considering getting a laser for a little while....think I just finally got convinced! That's awesome!

@thomasweich1751 Жыл бұрын

Thx, enjoyed it a lot, bought all stuff and needed to try it out. Color tile is really easy and the outcome quality is cool.

@sannyassi73 5 ай бұрын

Very handy tutorial. Got this saved to my Personal Laser Playlist- just gotta get some spray-paint and I'll be ready to experiment- really looking forward to it!

@BirdDogPresents 2 жыл бұрын

You're videos are great and super helpful. Thanks for teaching us how to make more.

@kevinjones6924 3 жыл бұрын

Jim, so cool! Thanks for the entertainment 😉 and inspirational video! Can't wait to try it 😊😊

@TheEdgeofTech 3 жыл бұрын

Glad you enjoyed it! Thanks for watching!

@terventar 6 ай бұрын

Thanks a lot for sharing! It's an amazing technique!

@theodoraughenu8467 8 ай бұрын

Awesome...really love the fight between Gandalf and the Balrog in the Mines of Moria

@WolfQuantum Ай бұрын

I have canvases sitting around from the "poured acrylic" painting phase I never quite got started with after buying the stuff. LOL. So, this, I can do. Awesome.

@thehappyextruder7178 3 жыл бұрын

Dude awesome tutorial more of these for sure !!! Happy Lasering !

@JeffBenedict Жыл бұрын

Great job. Awesome technique. One thing I do when I hang light weight items like that, i use push pins in the wall. Leaves a smaller hole that can be covered up the next time the wall is painted.

@harryragland7840 3 жыл бұрын

Your laser content is really great. I just got my Ready2Laser 7 watt diode laser. It's enclosed and I'm working on getting it vented outside. I haven't done much with it yet but I can definitely see me trying some tiles. I may try your system on some painted wood too.

@TheEdgeofTech 3 жыл бұрын

Awesome!! Let me now how it goes!! Thanks for watching!

@CoventreeCraftworks 7 ай бұрын

This is great!!! I'm so excited to try this!

@AtomsLab 3 жыл бұрын

I've been playing around with painted engravings on wood frames, I need to start experimenting on tiles and canvas :D Thanks for the video!

@TheEdgeofTech 3 жыл бұрын

Awesome! I hope you try it and love it! Thanks for watching!

@aarons.8532 3 жыл бұрын

I have 3 different clear coats in my garage and they all bubble a lot and don't coat evenly. Got the one you recommended in this video today and it's amazing.

@spacewalla3574 3 жыл бұрын

This is really cool an innovative. Complex, but innovative. Thanks.

@suprsparky77 3 жыл бұрын

Great video Man. Keep up the amazing work, and much thanks for sharing This! My Ortur is on its way, pending mail time during these strange times we are all working through! Looking forward to what you do next! Liked. And subbed! Cheers

@AmipazlimazJak Ай бұрын

I just discovered your video and now I can't wait to start creating my own wall art with a budget-friendly laser! 🎨🔥

@tm-dk1gq 3 жыл бұрын

lol....i know......"You shall not pass" lol in the mines of Moria. Love your work mate keep it up!

@ThysaniaAg 3 жыл бұрын

Great project and gift ideas! Makin me want a tabletop laser too 🤤

@greatnorthern9216 3 жыл бұрын

Dude! Your videos on the lasers are inspiring and so fun to watch. My laser is on its way from China and I can't wait for it to get here and get started on some stuff! Git Some Ye-Haw!

@09Hayabusa 2 жыл бұрын

I enjoy your videos!!! Very Detail!!

@richardleos3784 3 жыл бұрын

You just make the video hype bro you need a radio station you have that howard stern vibe bro keep it flowing

@Keedin. Жыл бұрын

Loved the video, thanks man. Just subscribed.

@benpeterson1405 3 жыл бұрын

I am totally new to the world of laser engraving and stumbled across your video doing some research on what can be done. I have an Ortur 20W headed my way and your video is exactly the kind of stuff I'm looking to do. Absolute golden example!

@enchantedbrick 2 ай бұрын

That Balrog looks fantastic! 🤩

@raioshine832 Жыл бұрын

Bruh this was awesome!!! ❤

@AJB2K3 3 жыл бұрын

Wow, that came out great!

@TheKatz2u 2 жыл бұрын

That's awesome!! I ordered a laser today. I know what one of my first projects will be!!

@benreyes2595 3 жыл бұрын

Your channel has taught me so much in my first two weeks of laser work. Can you do a video on how to square material if you don't have a grid base?

@Chico0942 2 жыл бұрын

Awesome video. Very helpful!

@joedog86 Жыл бұрын

Awesome project! What a great tutorial!

@Passionforfoodrecipes 2 жыл бұрын

This is so freaking cool. Ordered everything I need to try it!

@robertarmstrong2323 11 ай бұрын

You are the best out there..no one is close

@thebobloblawshow8832 3 жыл бұрын

Great tutorial. Thanks for the info.👍👍🇨🇦

@MsMymiracle 2 жыл бұрын

I'm going to try this tonight!

@pwntagerz 5 ай бұрын

Fantastic tutorial

@__q__718 2 жыл бұрын

This is awesome. Definitely going to try it. I use my laser for wooden flags I make. Great content bro.

@jacquesb5248 3 жыл бұрын

bloody clever idea

@BobBob-eh5sb 2 жыл бұрын

Just happened across this video. Great helpful info. Got yourself another subscriber!

@evanwhitfield6182 Жыл бұрын

Dude! The little option to change it to Norton tile and have it change up the image like that is great info. I've been wondering how people easily render an image like that. I have no graphic skills. Thanks man! I'm subscribed and will watch more!

@KodyWebb 2 жыл бұрын

thank you! this is so cool, I can't wait to try this

@imagr-deutsch4935 Жыл бұрын

Thank you so much for this awesome video!

@chefranylaitenu7731 Жыл бұрын

This is so cool!!!

@YeetLord666 3 жыл бұрын

So freaking cool! This video just got you another sub! I just got a 3d printer and I want to add a laser head to it. Can't wait

@disposabull 3 жыл бұрын

Two subs, that is awesome!

@tiarekaolelopono1406 3 жыл бұрын

super cool vid man! thanks...

@thunderkat4379 2 жыл бұрын

Bro! I like listening to his voice. He sounds like a DJ or possibly an announcer at a game. Wayne’s World, Party Time, Excellent! (Jammin’ Air Guitar)

@locokidschannel2676 Жыл бұрын

Thanks for this video, amazing

@jonmartinez1562 3 жыл бұрын

Thanks for the video 🙌🙌

@johndemitry8218 2 жыл бұрын

Well done brother.

@MakerCuisine 3 жыл бұрын

Really cool use of the laser

@3DHP 3 жыл бұрын

Nice Work Jim,Great Video.

@TheEdgeofTech 3 жыл бұрын

Thanks 👍

@MotoNoggin Жыл бұрын

That’s awesome!

@patriotwoodworker6092 2 жыл бұрын

Thanks dude! I am just getting into the router cnc world and 2 weeks ago got myself a laser I subscribed

@trugbilddrachen Жыл бұрын

This was great. How did I not see this before

@amandaquiles3880 3 жыл бұрын

This is one of the coolest things I've seen thus far! Now I'm gung-ho to go out and buy a bunch of spray paint and canvases, lol

@RGCbaseace 3 жыл бұрын

Simply awesomeness 👌

@TheEdgeofTech 3 жыл бұрын

Thanks for watching!

@serafsup99 3 жыл бұрын

"YOU SHALL NOT PASS"! Great cool videos! Thanks..

@TheEdgeofTech 3 жыл бұрын

Thanks for watching!

@steveo3012 11 ай бұрын

Nice video. This is the first time I've seen it. Have you done more of these? Are there any other cool things like this you have?

@lightning4201 2 жыл бұрын

Great Video!

@rarelyaccurate6252 Жыл бұрын

Very cool stuff

@highperformancebassboats Жыл бұрын

Egggggggggalent ! Great content. thank you for sharing. You Rock

@footerballer1 3 жыл бұрын

Great job!! Fantastic. What is the colour max do you think?

@dharmendrasinhrana7992 2 жыл бұрын

great video tutorial

@ImagR-Laser 2 жыл бұрын

Great video! :)

@olafb.2929 3 жыл бұрын

You definately inspired me! Thanks for this one. Canvas, never thought of that but it is AWESOME! One question: Did you use the magic numbers from the ceramic tile? Or made you tests on canvas too?

@TheEdgeofTech 3 жыл бұрын

Honestly I used the ones I got from the tile. But I would suggest getting a small 3x3 canvas and doing some testing on it before going bigger. It will save your project in the end.. Trust me.. LOL Thanks for watching!

@jfcalder1980 2 жыл бұрын

Awesome 👏

@MD-NWWI 3 жыл бұрын

Thats SUPER cool Jim!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@TheEdgeofTech 3 жыл бұрын

Thank you!

@3dtechnologies153 3 жыл бұрын

Loved it man..you should make some cool album cover art.

@anthonymyers-35 2 жыл бұрын

Awesome 👍

@MrRenoman2011 8 ай бұрын

Thanks Great video

@charlesdeshler202 2 жыл бұрын

Nice work

@goshko102 3 ай бұрын

Amazing tutorial, amazing work there. You helped me a lot putting my things together man. I just need to ask how the tile compares to canvas and how is it possible the settings to be the same considering the materials which are they made from? Is it something with the paint coating?

@jasonstatham5879 3 жыл бұрын

I like this. What colors would you recommend for a sepia look to do photographs? I'm thinking a darker brown for the last coat instead of the black.

@tillburn 3 жыл бұрын

Looks Amazing :)

@TheEdgeofTech 3 жыл бұрын

Thank you!!

@robinbishop4889 4 ай бұрын

Thank u so much for this video! U explain thing so well and very thorough. I did have one ?. When working with paint while burning; does it get all over your laser? If so, how do u clean it? Sorry for any dumb questions, lol I’m a newby here and literally just got my diode laser today and haven’t even set it up yet! :)

@RobsReels 3 жыл бұрын

So cool 😎

@tbullard52561 2 жыл бұрын

that would be the Balrog. Awesome tutorial!.

@GuysLightburnLaserGuides 3 жыл бұрын

Anymore videos planned bro, coz they are epic and yours are the most informative. Looking forward to the next one. You'll really help me on my amateur journey bro

@TheEdgeofTech 3 жыл бұрын

Thanks man!! Of course there are more coming!

@billd.4701 Жыл бұрын

Hi. Great video and just what I’ve been looking for. I just ordered the Ortur Master 3 and can’t wait to get started. I’ve watched many Lightburn videos and to me it seems very complicated with so many steps involved. My main interest is burning my own jpeg files onto canvas which will not be sold. Being very new to all of this, I’m wondering if there is a easy-to-use/understand formula for what I want to do? Thanks for posting.