Great video. If you put your scale under the funnel you can fill them to the exact weight easier.

Thank you for sharing your knowledge. It looks like your spacers are in copper, while your boiler is in aluminum or stainless, this with any natural salts in your water produce a electrolytic corrosion, probably why the bottom of your boiler turn dark Grey, it is corroding. You would better of using same material spacers than the boiler material, that will prolong your boiler life. Regards.

Love the pour spout spawn bags! Thanks for sharing Eric!

I am just getting started making the switch from hobby to small business and I just wanted to say thank you so much for sharing your process.

BMW 2002 is my dream car. My dad had a few when I was young.

This is a great video. Thank you for posting it.

Wow the cam shaft bearings make a great spacer!

You are a great teacher! Thank you

AWESOME SHARE huge amount of priceless info, inventions and time in this video!! huge thanks!!

I just bought a 50 lb bag of whole oats for my first go at making grain spawn... i'll look into getting some sorghum to mix in :) Cheers

im looking through all your comments and i appreciate your mad busy but it might be nice to every once in a while respond to a viewer with a good/legit question, these videos are informative videos right? thank you for all your knowledge, videos, and thank you for your service.

That was super helpful. Thanks for sharing.

Very Thankful that you share your knowledge! Only steam crimped oats are available where I live. Are they ok to use?

Very informative! Looking forward to making yummy fungi!

i cant eait to start my own soon...thanks man

I remember checking you building that controler for your pressure cooker on Shroomery

hey dude, if you switch your hose nozzle from shower to jet, you'll get a lot more volume. thank you for the awesome content!!

Thanks for your sharing. May i ask how long you keep at 121 Celcius degree?

Thanks for sharing . .

Awesome. I was surprised to see you not worry about moisture content of grains. Seems like all the teks ive tried people rely on heat to steam off excess moisture from grains. Thank you so much for posting this!

excellent....

that homemade bucket bagger is clever! Also your pre sealed colonized spawn bag you use for transfers was a cool trick. I always wondered how to g2g from bag to bag without making a huge mess. Thanks for all the tips Eric!

Can you use the drum sterilizer to do bulk spawn and if so, how long for? Thanks

Good stuff.

for dry bagging, what is the oat/milo to water ratio and steri time?

2 questions if you dont mind! Do you use the 41.5 qt All American on that Cadco unit? and how much space needs to be behind those flow hoods for proper laminar airflow?

Great video and update

Glad you mentioned not needing to soak at the end. Skipping that step speeds up the whole process.

Hello , can i buy from you 1st or 2nd gen grain spawn ? Send it on Greece ? Ty

What brand of sealer is that. It looks like it would a lot more consistent than the one I have

What is the mesh that you use for the bucket straining

What is the maximum temperature that the bag withstands in the Autoclave?

when I did your method without any spacers the outsides that touched the PC walls (all american 41.5 qt) were all mush and badly burst, too bad I loaded it up like you did. will this grain be OK? My first run where i used spacers this didnt happen at all.

Seeing your bags come out like Bundt cakes gives me a sight of relief. As I thought I was cramming to much in and that’s why mine look like that too. I may have just realized at this point in time that bubba barrels are not for sterilizing grain? But I’m presuming when people say sterilization they’re talking about partial sterilization(I believe that’s the term) of bulk substrates. Could you elaborate on this if you happen to see this. - CentralFloridaMan

What’s your water/grain ratio for the no soak?

can we use cotton in the bottle as cap to make grain masters🤔🤔??

Awesome ❤

Nice streamline setup.

How much spawn is required to add to each bag if I’m using pftek jars

Whats the BEST was to Close the bags witout seller ?

Can I use popcorn kernels for my grain spawn?

Would you share your source for Hepa Filters?

What temp do they colonize at ?

Can I seal bags before put them to cooker pressure if want to use needle for inoculation?

Do the bags seal themselves in the pressure cooker? Or do you need to seal them after they come out?

Not allowing grains to dry after soak is okay? So I can load them up wet?

Sweet!

Can I use hulled rye ? Or is it going to get too mushy?

How do your grains dry so quick??

That PID is brilliant. What kind of hardware is holding that thermocouple in?

What its the name of the grains u use?.

Whether you use gypsum and calcium carbonate?

Why pressure cook ? And for how long to pressure cook?

Why are you not using the delivered pot inside?

Can you use oats only?

How do your bags get all inflated like that?

How hard is it to get clients, cooks and stuff to buy them?

What kind of bag do you use?

what is name plastic bag?

Hi Thank you so much. You provide important tips too. Can refer me to a book, blog or a manual? If not can you do a video on humidy and temperatures?? For creating spawn. Growing mushrooms,. If there is a best time of the year?

bardzo fajy filmik zrobiles i wytlumaczyles pozdrawiam Kris zPolski

Do you not boil your grain?

Watched again😎

Is it possible to pressure cook with sealed bags? I don't have a flow hood yet and am trying to prevent contamination by sealing before cooking and then inoculating with liquid spawn through injection port in bag. Thanks.

Can you seal the bags before sterilizing?

very knowledgeable information Myers! I thank you for your time. what do you line the buckets with? didn't catch that. and how big are the holes you drilled into them? thanks

Great system. I was worried about melting my bags with direct contact to the walls without towels looks like you have no issues.

My bags always come out bad I sterilize & inoculate about 4cc they all been failures

I did my first mushroom growing attempt by inoculating hericium erinaceus lc to corn in a mason jar worked perfectly lol. Then i xfered to a hardwood pellet/wheat mix in the bags and successfully grow Lions mane my first try. Second try was unsuccessful. I learned in my microbiology class that sterilization is accomplished at 121 c* 15 psi 15 mins, but how long does it take for the mixture in the spawn bags to fully reach 121 c*?

What’s milo millet?

The scale wasn't on a flat surface. It might slightly different scaling results.

9:55 how to fold spawn bags

How many generations of grain-to-grain transfers do you usually do? And would a 24 hour soak work for rye as well?

Great info. Thanks for the upload.

Do you do the soak as a measure to trigger endospore growth so you can more readily kill them during sterilization or to improve moisture content of grain?

Plastic name ?

Hey that impulse sealer is amazing! I love auto locking mechanism. What brand is that?

What was the name of the bag you used in your old grow pots for soaking?

Where do you get the bag's for the gran blocks?

Do you ever use different grain mixtures for different mushrooms? or is this the best method for all of mushroom?

great vid. what is the shelf life of a bag of grain spawn?

Is it okay to use coco/vermiculite for spawn bags? Or just for substrate?

what ratio of water to grain do you use now since not pre-soaking

The bags do not close ?. Or do the bags have their own sealing system?

Hi man great video! I have a question, does that filters push out air or in?

What should I do of there is moisture in the bag after pressure cooking.

I had trich in all my spawn bags, but not my quart mason jars. I may not had folded the bags properly. Though, wouldn't it be more prudent to just heat seal the bag before put placing into the pressure cooker? I see you are inoculating your bags w/ spawn... I uses syringes... thx for sharing... you really have your ratios to water and spawn substrate down to a science. Congrats.

What scale are you using to weigh your grains?

🌞 Blessings

any reason you use quart jars and not bags?

Soo hope you have more archival footage. I can't wait months before the next episode! Mushfarmer vanished and now you got deployed. TR vanished too. Even Jewel bailed. Jablowski (spelling?) hasn't made one in years! KZfaq will suck! Poor Mossy Creek will be getting like a millions views a month! lol Hurry home!

veryyyy niceeee videooo

So you don't dry the grains? Doesn't that cause too much moisture inside the bag after sterilizing?

Where do you buy your bags?

What if you mix the different strains mycelium together in a new substrate? What happens?

I would have guessed that you use oats b/c they are cheaper than Milo.

Hey Myers! I am very curious on this... I have a small scale mushroom farm. The way I learned was that you needed to let the outside of the grains dry a bit before bagging. You dont worry at all about bagging the grains while the outsides are wet? In my head after PC there would be excess moisture in the bag.. Obviously watching this video that's not the case though, so I guess it doesnt even matter!? Lol

That "rock" at 4:19 was a dried-up rehydrated broke-off dog turd.

I see you did not us any Gypson or Coffee Grounds, So I try it with out it and it and didn't work with crap and had to do again with Gypson & Coffee Grounds and it work Perfect after that.

How much does a pressure cooker like that cost?