How to make Patio Blocks quick and easy from concrete // DIY

Рет қаралды 1,294,095

Жыл бұрын

Patio blocks or stones are super easy to make! They are great if you want some décor, or if you have a odd shape or size you can't buy in store. Check them out and make some for yourself!
Concrete Calculator
www.calculator.net/concrete-c...
Help support the channel and the things I can show by using the links below, it costs nothing to use them, but helps me out so I can help you!
- Tools/Materials Used (affiliate)
For Canadian buyers:
Trowel - amzn.to/3cRStlS
Edger - amzn.to/3bguQDf
Float - amzn.to/3PJHM3n
Brush - amzn.to/3oCVRDU
For USA buyers:
Trowel - amzn.to/3Sa8eVy
Edger - amzn.to/3Jg1GAE
Float - amzn.to/3cQXjA1
Brush - amzn.to/3JuZHsB
**************************************
Jesse Does DIY links:
🛠Email: jessedoesdiy@gmail.com
🛠Project Plans: jessedoesdiy.etsy.com
🛠Instagram: canadiyan_j...
🛠Instructables: www.instructables.com/member/...
Other Channel with Slade:
/ @jessefleming9763

Пікірлер: 409

@pointblank1978 Жыл бұрын

Great project. Concrete can be labor intensive and fun. I’ve done several jobs around the house. But didn’t make a video. Thanks for making this video. Letting the novice see how easy it can be. 👏🏽

@JessedoesDIY Жыл бұрын

Thanks! It is fun but yeah, lots of actual labor which I think is glossed over a lot of the time.

@johnwealthy6044 9 ай бұрын

better spending time doing things you love rather than on things that bore you!!

@peterpaliwoda1527 Жыл бұрын

Simply brilliant , I have a real hoch poch stone patio thrown down 25 years ago when I was very busy working and “living a life” I will lift it and use your method to make nice flat even slabs more suitable now we are retired and have the time to do things right …the old stone would then be good for recycling…I love KZfaq for guys like you inspiring us to “ get up and do something “ ( ourselves! ! ) Good Luck Peter P

@JessedoesDIY Жыл бұрын

Thats awesome, thanks so much! I'm really glad you like them and happy I could help out! Good luck on yours!

@mariliacoelho2942 8 ай бұрын

🤔😍👌🙏💯🍃

@JessedoesDIY 8 ай бұрын

Appreciate it!

@TheHansoost Жыл бұрын

Thanks for the information. Very helpful. I like the sand base on a sheet of plastic or tarp idea. Saves wood and will be much easier to release.

@JessedoesDIY Жыл бұрын

Anytime, glad you found it useful.

@priscilaoliveira7746 Жыл бұрын

Okay, this is INSANE!!! Soooo perfect!! I mean, i have to change some cracked old rocks around the pool area and i was thinking that cost me tons of money to do it. Your idea is just great for someone who wants to save some $ but also want to make a beatiful and customized project. Well done! :)

@JessedoesDIY Жыл бұрын

Nice! Well I'm happy I could help, sounds like it'll work out great! Good luck on yours!

@Carkebe Жыл бұрын

Everybody complaining about the busted STORE BOUGHT pavers, yeesh. LOL. 😆Love the project! Perfect for making custom size/shape pavers. 👍

@JessedoesDIY Жыл бұрын

Omh yeah....they are really taking the wrong thing from the video. Thanks tho, glad you liked it!

@mycreations318 2 күн бұрын

Love the way you explained it and made it so simple. Plus you could use that ball of cement you had at the end of pouring as a sphere to adorn your garden as well. This was a great video.❤❤

@amandaroberts5047 9 ай бұрын

Thank you! I'm going to try this at home! First time for concrete for me. Thanks for making such a clear and easy to understand video!

@JessedoesDIY 9 ай бұрын

Anytime, glad I could help! Good luck on yours

@ariyanadumon4549 Жыл бұрын

Thanks for the how to honey! This will be great when I build our porch!

@JessedoesDIY Жыл бұрын

Anytime! Happy to help, and good luck on the porch!

@adrianpoe4416 Жыл бұрын

FINALLY. Clear and not 100 steps lol. Looks great. I’m making some 12x36 ones soon and this was a great video! Thank you! 🎉

@JessedoesDIY Жыл бұрын

That's awesome! Keep me posted on your progress, good luck!

@adrianpoe4416 Жыл бұрын

@@JessedoesDIY hey stupid question, I’ve never done anything with concrete. Just use quickCrete or do I want a brand that doesn’t dry too fast? What brand did u use for this? Also just a bag of play sand works?

@JessedoesDIY Жыл бұрын

No prob. So I used quikrete 5000 on this. You can really use any bag, but this 5000 and 6000 mix of theirs sets up faster then the regular stuff. It doesn't get hard too fast to work with, but it sets up in about 8-10 hours as opposed to 24 hours. This way at the 24 hour mark or so you can demould and lay the stones, gently of course. The regular stuff you'll demould after 24 hours and wait another day to move them yet. And yup, any type of sand will do, nothing special. Hope that helps, good luck on yours! Keep me posted

@adrianpoe4416 Жыл бұрын

@@JessedoesDIY sweet thanks SO much for replying!

@JessedoesDIY Жыл бұрын

Anytime!

@craiglawrey7518 2 ай бұрын

Love the quick and straight to the point video. Well done. Thanks.

@JessedoesDIY Ай бұрын

Thank you, glad you like it

@atilamatamoros7499 5 ай бұрын

Congratulations! your method is wiser than others on youtube

@beardedcatguitarplus9485 9 ай бұрын

Great video thank you for posting it. I’m going to be doing the same thing but making 1’squares 2”thick for landscaping pavers ontop of landscaping rocks to then eventually put plant pots on them. Going to make a frame like yours but with cross boards to make three or four pavers at a time on one jig.

@JessedoesDIY 9 ай бұрын

No problem, glad I could help! Awesome good luck on your project! Love to see it when its done, shoot me an email

@christophermichael3674 21 күн бұрын

Probably never be able to do other than at my own place so I'm glad I got to watch others doing it on KZfaq

@JessedoesDIY 12 күн бұрын

Me too, thanks for watching

@frederickastilla3614 11 ай бұрын

Thanks for idea! It was Genius! Never even thought that!

@JessedoesDIY 11 ай бұрын

No problem!

@Anonimowy_Jutuber 11 ай бұрын

A lot of work! I can't imagine making 30 or 50 of these pieces :O But thanks for the idea and implementation. Good work :)

@JessedoesDIY 11 ай бұрын

I mean, it isn't a lot of work to just make a couple. I wouldn't make more than that, just for random spots or shapes. Glad you liked it

@royb2251 8 ай бұрын

Looks good 👍🏻

@JessedoesDIY 8 ай бұрын

Thanks!

@poonamjings5279 Жыл бұрын

Best 👌 video so far! I enjoyed it

@JessedoesDIY Жыл бұрын

That's awesome, glad you liked it!

@bubbatennessee7531 Ай бұрын

Thank you so much, now I have some idea about making a few cap stone blocks for my swimming pool.

@JessedoesDIY 29 күн бұрын

Anytime! Sounds like a plans, good luck

@madajuarez7073 Жыл бұрын

So cool! Love this technique

@JessedoesDIY Жыл бұрын

Thanks so much! Glad you like it

@lorettareid4120 5 ай бұрын

Really learnt alot here.. Thinking of offering a basic patio block customized service as my retirement plan...my partner has been a mason for 45 years...

@JessedoesDIY 5 ай бұрын

Thanks, I'm glad you found it useful! If that's the case, I'd also check out my other recent video on making exposed aggregate patio blocks, it pretty neat. I hope it all goes well for you

@ojardineiroeden 11 ай бұрын

I'm from Brazil! it helped me a lot, thanks

@JessedoesDIY 11 ай бұрын

Awesome! I'm glad I could help! 🇨🇦

@RootSuitMan Жыл бұрын

Man those look really good

@JessedoesDIY Жыл бұрын

Thanks!

@vrahomes 3 ай бұрын

this is so satisfying!

@JessedoesDIY 3 ай бұрын

Thanks

@sammydavis991 Жыл бұрын

Keep going! Looks like you have a few to replace.

@JessedoesDIY Жыл бұрын

That I do, yup

@sfils Жыл бұрын

Good to see you had your European open toed safety boots on!! Great video.

@JessedoesDIY Жыл бұрын

Always lol. Thanks

@ediasacediasac7666 9 ай бұрын

Gracias..saludos desde Perú

@JamieDPS 8 ай бұрын

Looks good but u need reinforcement inside to prevent cracking on settling/uneven base.

@fab4fan173 21 күн бұрын

Thanks, easy to follow . Well explained.

@JessedoesDIY 12 күн бұрын

Thank you

@michaelnovak9766 11 ай бұрын

Tap your forms around the edges after you have the concrete to height Another suggestion for textured finished is pour it upside down on some textured wooden boards or mats or stamp a pattern on it. Just a case of using your imagination and items that you have kicking around 🙂

@JessedoesDIY 11 ай бұрын

Absolutely

@kenniegarner3848 8 ай бұрын

There is always one.

@brocksamson7164 8 ай бұрын

Excellent idea!

@grant7934 24 күн бұрын

Beautiful job, Jesse. Those new ones look better than the existing.

@JessedoesDIY 21 күн бұрын

Thanks! Most of the old ones I got for free so I can't really complain

@luisaparecido5885 5 ай бұрын

Thank you for sharing!

@JessedoesDIY 5 ай бұрын

Anytime! Happy to help

@averageguy1261 Ай бұрын

Great vid. Thanks for sharing.

@JessedoesDIY Ай бұрын

Appreciate it, glad you liked it

@WaynesAdventure Жыл бұрын

Looks great

@JessedoesDIY Жыл бұрын

Thanks!

@mohammedsaadsaad3081 6 ай бұрын

You are really perfect thanks a lot

@alexandradeoliveira3892 Жыл бұрын

Great job!

@JessedoesDIY Жыл бұрын

Thanks!

@melenelewis2955 9 ай бұрын

Nice! I live in south Africa so I don't get the same products as you do...... Are you using a premix fast drying concrete? If so what are the cement ,sand and stone/ grittone ratios?

@JessedoesDIY 9 ай бұрын

Thanks! It was a poor mix but not fast setting, just basic concrete. To mix your own use the 3-2-1-.5 method. 3 parts aggregate, 2 parts sand, 1 part cement, .5 parts water. Adjust as needed. Hope that helps!

@menglouie2427 2 ай бұрын

I love your method. I just subscribed

@JessedoesDIY 2 ай бұрын

Awesome, thanks. Welcome to the crew

@velvettedelaney Жыл бұрын

Thanks for this! Does the sand just wipe off the bottom, or does it get absorbed and become part of the paver?

@JessedoesDIY Жыл бұрын

No prob! Some of the sand will stick to it and that's fine, but most of it will just wipe off

@lesvictor 9 ай бұрын

This is excellent content. Thanks.

@JessedoesDIY 9 ай бұрын

Anytime, glad you like it

@deer8730 8 ай бұрын

thats pretty good, I would only try to add some colour to the concrete to match the existing blocks

@JessedoesDIY 8 ай бұрын

Thanks. You totally can if you want but once these fully dried out after a couple weeks they lightened up and matched

@user-rs6xk3rc8q 6 ай бұрын

awesome; nice and simple explanation

@JessedoesDIY 6 ай бұрын

Thanks!

@croness91 Жыл бұрын

ive seen a lot of tutorial, this one is the easiest and beginner friendly.

@JessedoesDIY Жыл бұрын

Thanks, glad you liked it!

@user-um8hq9vm8f 7 ай бұрын

What brand of concrete is the blue bag? I’ve tried this with sakrete and have no luck getting that good of a finish. Always hitting small rocks during edging… any advice would be awesome!

@JessedoesDIY 7 ай бұрын

Quikrete is all I buy because I have the most access to it. Good luck

@DanteVelasquez 9 ай бұрын

Those look great 🙂

@JessedoesDIY 9 ай бұрын

Thanks!

@utubeblackbat 10 күн бұрын

cool, nice video , thanks

@emmanuelisanda1449 Жыл бұрын

Looking great those slabs. You definitely have more cracked ones to replace though

@JessedoesDIY Жыл бұрын

Thanks. Yeah, I broke that one cutting wood on it lol I have a dedicated block now that's super thick and reinforced for cutting on

@61Paul 29 күн бұрын

Looks great!

@JessedoesDIY 29 күн бұрын

Thanks!

@harishveeramani2907 Жыл бұрын

Nice work :)

@JessedoesDIY Жыл бұрын

Thanks!

@antongusev381 5 ай бұрын

Grate! Vibration table will help you aviod of bubbles

@AngieWilliamsDesigns Жыл бұрын

Another great project. I would like to build a pad for my garbage cans.

@JessedoesDIY Жыл бұрын

Thanks very much! I actually have a great concrete pad video I posted just recently that would be perfect

@johnwealthy6044 9 ай бұрын

Very nice job!! Is it possible to make then 1.625" thick rather than 2"? Can a quick dry concrete mix be used? I wasn't sure when you said do the edges after 1.5 hours.... is that after the initial edging which was after 30 minutes?

@JessedoesDIY 9 ай бұрын

Thanks. If you go and thinner than this they risk cracking very easily, and the faster it dries, the more likely it is to crack. And yes, I did the edges twice, once as a initial pass, and the second later to smooth it out. Lessens the risk of damage to the edges

@dupre7416 Ай бұрын

My partner and I have been making dozens of life-size Bigfoot footprints using a similar technique. I like to see that you can do something professional like this as well. I think this is probably cheaper than buying 2'x4' premade pavers at HomeDepot. Unless you factor in your time... then it's no contest. I see this as something I'd do if I wanted a paver size that isn't available. Nice work 👍

@JessedoesDIY Ай бұрын

Thanks. That's exactly why I make them, when you need sizes you can't buy

@thetripledogdareshow4161 11 ай бұрын

Thank you sir ur amazing

@JessedoesDIY 11 ай бұрын

Anytime! Thanks

@filiprakocevic3325 Жыл бұрын

Hey man, nice job! Thank you for posting. I have a quick question: What if I wanted to do something like this but the blocks would have to support pedestrian weight or maybe even weight of a car? Should I then use thicker blocks or add rebar?

@JessedoesDIY Жыл бұрын

Thanks! Well if you make the blocks with a 1x3 form it'll be thick enough for pedestrian no problem. Reinforcement will never hurt but I'd use a wire mesh made for house parging, it's thinner for this thin stone. A vehicle is another story, that will need rebar and be about 3.5-4.5" thick and dried for at least 3 weeks.

@Oliviasdad1073 Жыл бұрын

Not sure if you did that one stone that was cracked but not good advertisement

@JessedoesDIY Жыл бұрын

Haha I got a few stones from a friend for free a few years ago and I broke it myself by dropping another stone on it accidentally

@user-co2hm8cq9k 8 ай бұрын

Hi, your video is really good and easy to follow. with 20Kg bag of concrete, quick dry, have grave already, how may paver 60*60*4cm i can make? do i need steal bar inside?

@JessedoesDIY 8 ай бұрын

Thanks, glad you like it. I have a concrete calculator in the description, or you can Google it. Fill in all your info and it'll tell you all you need to know about how many and how much. Reinforcement bar will always help prevent cracking and is always great

@royspeakman1157 9 ай бұрын

Brilliant !

@JessedoesDIY 9 ай бұрын

Thanks

@alexei7825 Жыл бұрын

Красавчик крутая идея молодец

@jimmyngo649 10 ай бұрын

Hi Jesse, which size of the box should i use to make normal patio? 1x3? 2v3? I need to make a 700sq feet

@JessedoesDIY 10 ай бұрын

That's going to be a ton of work, you'd be better off to buy some if you need that many, but the bigger the better as long as you can lift it

@leszekostachowski549 Жыл бұрын

In the sand you could imprint some pebbles or other wood texture and have a more interesting one.. Only I always wonder what to add to the sand to make it the same as for foundry moulds.. ash, bentonite?

@JessedoesDIY Жыл бұрын

The sand is on the bottom, adding things to it would be pointless. These stones were made face up

@leszekostachowski549 Жыл бұрын

@@JessedoesDIY After all, it's enough to make a mistake, it's not that difficult and do it differently :)

@randypandolini6506 8 ай бұрын

I have a planter that I want to remove all plants and fill in with paver. I plan to put small concrete benches on top. Do I need to put rocks underneath?

@JessedoesDIY 8 ай бұрын

You need some kind of a base. Typically you'd dig down a bit and place a couple inches of sand down before adding the pavers, at a minimum

@justgivemethetruth Жыл бұрын

Is it cheaper to make these or buy paver bricks at Home Depot? Also, do you know about how much weight they will take, and would putting some kind of screen inside it act to hold it together? Nice simple explanation, thanks.

@luifranco1457 Жыл бұрын

I think the point here is that he made custom-sized pavers for the area he needed, so in this case there is no paver option to buy at HD. With regards to how much weight they could handle, that depends on the concrete mix you use (use a higher PSI rated mix if you’re expecting a lot of weight over them later). One thing he didn’t do is put some kind of wire mesh in them, when I did mine I used chicken wire after pouring half the concrete on each form, that helps to keep them from cracking.

@JessedoesDIY Жыл бұрын

They are close to the same price in this case, not much difference. But yeah, going this route you can make a custom size for yourself and even dye it if you want. These ones I made are pretty light duty but can easily support a few hundred pounds. If you add a fine mesh or something to it for reinforcement it'll be even more resistant to cracking. Thanks, I'm glad you liked it

@justgivemethetruth Жыл бұрын

@@JessedoesDIY Oh, I forget to ask, what kind of concrete or cement do you use? Can you use portland cement? I wonder did you actually price out what it costs per square foot. I have about 100 square feet portion of my front yard that I can not do anything else with and I think I just need to cover it with pavers, but pavers cost so much, and I don't want to actually cover it over completely with concrete. This would be a good solution if it is less expensive, and still better and more custom even if it was the same price.

@JessedoesDIY Жыл бұрын

I used Quikrete bagged mix that I had on hand, but just the basic yellow bag quikrete will work just fine. You can't do cement only, it'll crumble apart. Concrete is a mix of things and it needs that to be durable. I did not price it out, but I do know that the what a bag covers and it ends up being about the same price as buying a stone. Like I said in the video, I made these because I needed to fill that specific spot, but it costs the same amount to just but a stone in store. If you're just covering a spot, it's up to you how you want to do it

@rubenlopez4254 10 күн бұрын

What are the mix you use?

@teanasmith6721 4 ай бұрын

I'm wanting to make bigger pavers, at least 600mm^2 would you recommend using rebar or some sort of reinforcing inside?

@JessedoesDIY 4 ай бұрын

I'd use a bit yeah, even just dome wire mesh. Especially if they'll see some use and foot traffic

@pa.fishpreacher6166 8 ай бұрын

nice job

@JessedoesDIY 8 ай бұрын

Thanks

@RalphMickey Жыл бұрын

ok haven't played with this stuff before - what did the 1/4 inch of sand do at the beginning ?

@JessedoesDIY Жыл бұрын

No prob. It just prevents the concrete from sticking to anything, the plastic included. It also gives the bottom of the stone a bit of a textured bottom so it gross the ground better and prevents it from moving a bit. And since sand is an ingredient in concrete, it doesn't hurt anything

@Amithrius 15 күн бұрын

These look great. Just a question: Would these work on a driveway without cracking as is, or would they need to be reinforced?

@JessedoesDIY 12 күн бұрын

Thanks. Anything for driveway use should be about 4" thick and reinforced to resist the weight

@eddykelemis8964 Жыл бұрын

What concrete mix did you use do i have to add rocks to the mix or does it come in the bag

@JessedoesDIY Жыл бұрын

I just used the yellow bagged quikrete concrete mix. Concrete already has stones in it. People often confuse cement and concrete but cement is 1 ingredient in concrete, along with the aggregate

@ca6177 Жыл бұрын

Nice!

@JessedoesDIY Жыл бұрын

Thanks

@buiding_your_trust 10 ай бұрын

How do u mix the mota

@luna-qt1nd Жыл бұрын

Is look nice good idea

@JessedoesDIY Жыл бұрын

Thanks!

@antoniocalandrini2941 Ай бұрын

Parabéns gostei bastante.

@mohammedsaadsaad3081 6 ай бұрын

Excellent

@JessedoesDIY 5 ай бұрын

Thank you

@XroorX Жыл бұрын

I made pavers using a cut 55gal barrel, and they were 2-3” thick and never cracked.

@JessedoesDIY Жыл бұрын

Nice!

@juancarlosagurtocerna2426 5 ай бұрын

Cuantas palmeras da con 1 saco de cemento de 25kl?

@leydamoncada4851 2 ай бұрын

Thank you so much. I am going to do a small short 70lb one! For strongman training. Wish me luck

@JessedoesDIY 2 ай бұрын

No problem! Oh wow, nice. Well good luck with the project and training! Depending on what you do with it, I may add some reinforcement to give it more strength

@leydamoncada4851 2 ай бұрын

@@JessedoesDIY any suggestion on how to reinforce it? We are going to lap it and shoulder it

@JessedoesDIY Ай бұрын

You can use some mesh and cut it with tin snips or rebar but you'll need a way to cut it like an angle grinder. Both reinforcement methods are in the concrete aisle

@jezzter4106 3 ай бұрын

Mist the slab with water and re-trial it with enough pressure to bring the butter back up and then re-broom it. Works every time.

@serge3388 Жыл бұрын

What type of sand do you recommend to use?

@JessedoesDIY Жыл бұрын

Just basic washed and screened sand. I just bought a 5 gallon bucket of it from a landscaping supply

@vipsaulo Жыл бұрын

Great video. I was thinking they are too thin and have no iron bars inside. The iron rods don't have to be too thick either. For the corners may be alright but towards the end of the video I see some cracked stepping pieces. To smooth it out I find it better to use some foam or Styrofoam to rub gently over it , as necessary, before it is too dry. You might also sprinkle little water on it for that.

@JessedoesDIY Жыл бұрын

Thanks. Yeah I didn't add because they are a decorative corner stone that won't be abused. The cracked stones I got for free from a friend a few years ago for the firepit, and one I smashed myself by accident.

@billy4148 Жыл бұрын

@@JessedoesDIY they would be nice all done like them, but don't forget the rebars

@kenniegarner3848 8 ай бұрын

There is always one.

@mcraw4d 4 ай бұрын

Because if the length, I personally would have tossed in some repurposed wire coat hanger pieces for some added strength.

@deuscriadordetudo.oeternoe6292 8 ай бұрын

É p balcão.? Não é preciso ferro?

@kimuseni Жыл бұрын

Very nice

@JessedoesDIY Жыл бұрын

Thanks

@user-fl7sw2pk9f Жыл бұрын

Delicious

@JessedoesDIY Жыл бұрын

Thanks

@galleria100fuegocuidadsate4 7 ай бұрын

nice. one thing tho if add rebars or mesh of some source it will be solid and last longer ... as you can see in the old slap its cracked for severals reasons ,one of of them bien lack of rebars or mesh

@JessedoesDIY 7 ай бұрын

Absolutely. Some of the old stones were cracked when I got them as I got them for free, and a couple I smashed by cutting wood on them lol. I've since made a thick, reinforced slab to cut wood on

@galleria100fuegocuidadsate4 7 ай бұрын

@@JessedoesDIY cool! I am a handyman . I love concrete work , wood work , deco and much more … problem in uk very hard to have space for a garage or work station etc .

@JessedoesDIY 7 ай бұрын

Nice. Yeah I could see that. We have more space here than anything for a shop, but they are so insanely expensive here I can't afford one

@stevelopez372 6 ай бұрын

If you think your to late, wet the brush. I saw diamond mesh did you reinforce your molds with the mesh? Nice job.

@JessedoesDIY 6 ай бұрын

Good point, I should have, but after a few passes it actually looked good. I didn't on these lightweight stones but I have another video for a different style that I did, I reinforced that one

@alexandrut5405 Жыл бұрын

Why did you put clean cement on top and sand underneath? Is it more resistant and stronger that way?

@JessedoesDIY Жыл бұрын

The sand is just a base so the concrete doesn't stick to the plastic. It also gives it a textured bottom so it doesn't slide on the ground and stays where you put it. The mix is concrete, not just cement. Concrete is pre measured sand, rock and cement already.

@ashenafigaim4348 Ай бұрын

Thanks ,could mind you tell us about its width and lenth in meter sir please .

@JessedoesDIY Ай бұрын

I can't remember exactly, I think It was about 25 cm wide, 80-90 cm long, and about 5 cm thick

@SanthoshKumar-ye3sh 2 ай бұрын

Can we reinforce them by placing a steel wire mesh in between the concrete mixture.

@JessedoesDIY 2 ай бұрын

Oh absolutely

@laurensiemens1436 Жыл бұрын

Awesome Job..... you could add dye to color your blocks to add depth to the project

@JessedoesDIY Жыл бұрын

Absolutely! Thanks

@bojankojic108 Жыл бұрын

what colour would look good? black? dark grey? i will put white pebbles around this blocks.

@JessedoesDIY Жыл бұрын

Charcoal is always my go to! But it can be pricey to make a bunch of blocks, at least in my area

@townshipbs2335 7 ай бұрын

can you do it directly on the grass?

@JessedoesDIY 7 ай бұрын

Not recommended. Too soft under it, it'll be prone to cracking. Plus things might try to grow through it and because organics don't agree with concrete, you don't want to pour on them and embed them in it

@townshipbs2335 7 ай бұрын

i want to make a large area. how can i do it without get rid of the grass?can i put some plastic as base?@@JessedoesDIY

@JessedoesDIY 7 ай бұрын

If you want to do a large area you may want to pour a concrete pad down, I have a video for that as well. But unfortunately there is no cutting corners like that, it'll break and crack without a proper base down first, simply covering the grass won't work

@francistham9928 8 ай бұрын

No need for rebar or wire mesh for strength?

@JessedoesDIY 8 ай бұрын

You can add it, for sure. But for my needs I don't. Any stones you buy in store don't have reinforcement so these should be about as strong as those

@lizystratabojomira 7 ай бұрын

On the bottom of your form you had spread ome sand?

@JessedoesDIY 7 ай бұрын

Just to prevent the concrete from sticking to the plastic. Sand won't harm the concrete

@julietphillips1991 Жыл бұрын

They turned out real nice! Why didn't you make one to replace the large cracked paver/tile?

@JessedoesDIY Жыл бұрын

Thanks! Well a bunch of the stones are cracked anyways. I mostly put the fire pit together years ago on a shoe string budget, so most of the stones I got for free, and some cracked. The one you saw tho was the result of me splitting a log on it lol So that's a upcoming video

@nahidchobtarash3700 4 ай бұрын

please use persian in transelate too ,thank you 😊🤗

@robgad2271 Жыл бұрын

Fun little video. Got a question: Why do you show so many broken tiles in your patio? It might be a good time to go over this on a next video, ground prep, tamp plate, gravel, and in the form gravel and or wire reinforcement or thickness of tiles to try tp prevent the cracks. No, I'm not being critical, just thinking ahead and knowing the topic from my extensive past work in construction and landscaping, the presence of cracks indicates a (preventable) problem, that is, if you want to avoid cracks or traffic depressions on your nice flat patio.

@JessedoesDIY Жыл бұрын

Thanks. I show it as it is, not worried when something isn't perfect because most peoples yard aren't perfect. Especially in my extreme Canadian climate, things don't last as long. But in this case it's broken because some were already cracked as I got them for free from a friend, and others were broken by me when I smashed a giant log onto it

@walterchavez3024 8 ай бұрын

What happened to the dirt you put underneath the slab you made??

@JessedoesDIY 8 ай бұрын

It was sand, and nothing. Just shoveled it back into a bucket. It prevents it from sticking to the plastic, and because sand is an ingredient in concrete it doesn't hurt anything

@keithprinn720 Жыл бұрын

before making form you have to work out size required as a unique size you said. those would be better custom size just a few seconds and a measuring tape.

@clairemargaretcooper5230 10 ай бұрын

I’m new to these things so please bear with me. Is there some sort of ingredients or ratio of the materials used?

@JessedoesDIY 9 ай бұрын

No prob. I used pre bagged concrete and just bucket of regular playground sand from a local landscape supply for the bottom. The concrete is already pre mixed in the bag and just needs water according to the instructions on the bag, or until it gets to the right consistency. If you're mixing your own concrete you'll use the 3-2-1-.5 method. 3 parts small rock, 2 parts fine sand, 1 part cement and .5 parts water

@RonAnderson-zs1kf 6 ай бұрын

This guy is good

@JessedoesDIY 6 ай бұрын

Thanks

@360_tours 6 ай бұрын

Is this normal concrete? Some are suggesting adding sand. Did you do that?

@JessedoesDIY 6 ай бұрын

This is prebagged concrete. Concrete is premixed already with everything you need, just add water. If you're buying cement, then you need to add sand and rock to make it concrete. Cement is an ingredient in concrete so if they are adding sand to already mixed concrete they are messing up the ratios and weakening it. They are either unaware of the difference between sand and concrete or are sabotaging it themselves

@johnwealthy6044 9 ай бұрын

I tried this as an experiment before I commit to making wall caps for real. And my only problem was the concrete. After 1.5 hours, whilst trying to round the edges, i kept on hitting and dislodging the concrete ballast stones and it left a horrible local rip out. So, 1) didcI use the wrong mi? 2) did i hit this too early / too late? I waited 1.5 hours.. grateful for your advice.

@JessedoesDIY 9 ай бұрын

Sounds like you may have either had it too wet, or you weren't lifting the nose of the round over tool enough, or you may have been pushing too hard. Tough to say without seeing it

@melissawallace9745 Жыл бұрын

Nice job. Looks great. But it's really easier to do a dry pour. Dump half dry cement and smooth...add rebar or whatever, add more dry level and mist with water. No heavy mixing. And very strong

@JessedoesDIY Жыл бұрын

Dry pouring is a terrible idea on so, so many levels