I had the same problem with my tiger 1, and your video helped me, now the smoke unit is working again. Thank you !! from Brazil.

Such a helpful video! Both our challenger 2 and tiger one have this issue, the challenger 2 geez what a task accessing that smoke machine! 😅 not done tiger 1 yet though. After following this video I had black cotton wool soaked, tested before putting back together and worked great, screwed all back together and doesn’t smoke much again 🙈 but shall leave it a day and see how it works out! Thanks for great video!

You know how much my dumb ass put up the exhaust pipe? Three whole squeezy tubes. Y'know, just a little bit more than recommended

I have a henglong leopard 2 pro version winter camo and the smoke unit quit working but using your tutorial just I got it working again,thank you so much mate 🍻

I put as many drops as you did in the video. I smelled a burning scent coming from the smoking box. I opened it and the cotton was burned. I then replaced the cotton with new cottons from my home and put 2 ml of smoking oil according to the instructions. After these I still smell the burning scent but once I opened the smoking box the cotton was soaked but was perfectly fine.

The details on these tanks are amazing, right down to the smoke. 🙂👍🏻👍🏻

Thank you ...... really I have 4 heng long tanks and none of the smokes works ...! They do now ...........!!!!🍻🍻

I had the same problem....too much oil now I know how to fix it. Thanks!

Thank you for this video. I like Taigen's method to add oil via a separate line inside the tank. But I had too much oil so will now clean it out and control the flow more carefully.

I had the same thing happen on my Leopard. Thanks for taking time to share the video m8.

from rockford IL. thanks. it very help full on what could be wrong and how to fix it. i went a step farther and checked my voltage and see if there was a open . but mine was just flooded with too much oil also. took some oil out put it back together . test ran it and i now have smoke. thanks. john

nice RC !!! great tips !!! hope the day was good for you guys .

An excellent and informative video . Thanks for this useful advices !

Thank you so much for the info now my walker bulldog is smoking again.

Great video much appreciated!!!

Impressive technique, looks so real!

Very cool and great job and informative.

Thank you so much

Thank you!!!!! 🙏🏽

Beautiful tank ❤️👍👍

This helped me so much thankyou

Great video. I think you’re better off adding smoke oil directly into the top of the unit rather than into the exhaust and tipping the tank up etc.

Interesting video my friend 🙂👍🏻

My tiger 1 doesn't produce alot of smoke and only 1 side works. I'll surely use this video to try to make it work again. Thank you well deserved like

thank you sir got my smoke working again

Just got a king tiger, barely smoked then no smoke at all. Put the 2ml in and tilted it but still nothing. Then I see online it's a major issue with these bloody tanks! Maybe the cotton wool is blocking the other pipe for the smoke to come out?

Thanks for the video and shedding light on this. Question for you how to fix the track on the Sherman went the pins come off?

👍👍

I have a taigen panzer III L and i have smoke but its not super visible. Ive seen some tips on how to improve it but any tips?

T(h)ank you so much! Your video helped a lot! As you said there is not much info about it on the internet and I'd add that forums aren't really helpful

Can you also please do a video on how to remove the smoke generator

Stroke a magnet a long your screwdrivers to make them magnetic.

What should I do if there's only 1 tube producing smoke ?. Should I buy a new smoke machine

My original cotton is soaked. Will regular cotton balls work as a replacement?

Very 😎🆒️❤👍👍🤗👋👋

I had that same problem I had

Isit just same if i do that in my merkava tank because the smoke is not working

what is the name of the oil?

What I’m doing is running my smoke machine a lot

The problem i am having is one side is working and other side isn't.