No video
How to make REAL Carbon Fibre (Fiber) fog light surrounds.
Рет қаралды 69,003
Күн бұрынHow to make REAL Carbon Fibre fog light surrounds.
This video shows the process used to make these carbon fibre fog light surrounds for the Renault Clio Sport 172/182
Products i used in this video in this step by step tutorial are -
Release Agent
www.easycompos...
Prepreg Carbon
www.easycompos...
Release Film
www.easycompos...
Breather Cloth
www.easycompos...
The vacuum bags are food grade boil bags that i get from a friend. And sealed using a standard heat sealing machine.
Clear coat used is lechler macrofan hs 2000
These moulds have been made from tooling prepreg, very light and strong moulds. I will make a video soon showing how i made them.
For now want to see a more detailed video about a different mould check out this video -
• PERFECT MOULD. Carbon ...
Camera used is GoPro Hero 8
#prepreg #renault #carbonfibre
Carbonworkshops@gmail.com
@ExadousPT Жыл бұрын
Love the details and instructions on used materials in your videos. 😉
@mr2ferrari Жыл бұрын
Pardon my French but... fakin' el, have I got to make the upgrade to prepreg! That looks so much faster, cleaner, easier, better than all of my infusions/ wet-layup/ shite I've done for the last ten years!! Well done 👏
@CarbonWorkshops Жыл бұрын
It's definitely cleaner! But like anything does take a bit of learning and getting used to. But end results are always perfect.
@garydeandeery Жыл бұрын
Iv always done the chopped look or carbon cloth way with dry and adding the resin between. Never tried the pre preg stuff
@TheSouthParkVidsFTW Жыл бұрын
It's nice to see real carbon fibre for a change everything just seems fake these days. I don't know how may times i have bought something labelled as carbon fibre only to find out after wasting my money it's just a fake hydrographic print or cheap vinyl wrap.
@nrao8977 Жыл бұрын
At 1:00, how did you make that "mold"? So, if I am going to make a kayak, how do I make the mold that will be used to make the fiberglass/carbon fiber hull?
@CarbonWorkshops Жыл бұрын
This mould is made from tooling prepreg. For a large kayak, I would use gel coat backed with resin and chopstrand fibreglass. You can see this process in my other videos.
@jamesbarisitz4794 Жыл бұрын
The bit on the trim cutter looks awesome. Who makes it? Killer bezels!
@CarbonWorkshops Жыл бұрын
Not sure to be honest. It's just a dremel extension attachment. Should be easy to find.
@ivandjordevic696 Жыл бұрын
Wow, your skills are incredible. How did learn to work with carbon fiber? I would like to learn to make things with this incredible material
@TE_53349 Жыл бұрын
I just trial and error. Costs a lot but eventually you stop making mistakes
@CarbonWorkshops Жыл бұрын
Thank you! I learned through trial and error
@keykey1401 10 ай бұрын
Have you ever made carbon fiber pool cues?
@NorthdownAngler Жыл бұрын
Now that's a tidy set up. What did you use to fix them to the original part?
@CarbonWorkshops Жыл бұрын
These were bond into position, so we used tiger seal.
@NorthdownAngler Жыл бұрын
@@CarbonWorkshops nice. I've seen a good bit of your work and it's absolutely class. 💯 % quality
@CarbonWorkshops Жыл бұрын
@@NorthdownAngler thank you 🍻
@jeanfrancoispoivre4438 Жыл бұрын
bien le résultat
@TheShaddix Жыл бұрын
Amazing work as usual! What grit do you use before you clearcoat?
@CarbonWorkshops Жыл бұрын
Thanks! I used 320 grit
@TheShaddix Жыл бұрын
@@CarbonWorkshops Do the scratches from that grit get completely hidden by the clearcoat? I use 400 but 320 would for sure have a better bite. Maybe I should try that too!
@baldcreations8044 Жыл бұрын
Nice ,really nice mate, what's your temp and ramp rate for the oven?
@CarbonWorkshops Жыл бұрын
It's the Xpreg standard cure cycle. About 4 hours at 70 deg and 1 hour at 120deg (been a while since I looked as it's programed in the oven)
@alexeymurashko9073 Жыл бұрын
Hi, what kind of fabric is this that glues itself and does not diverge into fibres?
@CarbonWorkshops Жыл бұрын
Prepreg carbon fibre
@yaz8613 Жыл бұрын
What kind of carbon like that? I mean what a specific name carbon and where can i get it😊🙏🏻
@CarbonWorkshops Жыл бұрын
Xpreg xc110
@chaalu420 Жыл бұрын
How much did they weigh?
@CarbonWorkshops Жыл бұрын
Original was 48g. Carbon was 23g
@sandmangti7040 Жыл бұрын
But you laminated on plastic, no? So no savings? Hate CF laminate. Will not hold up. In cold will crack under clear coating.
@TheVenividivici1985 Жыл бұрын
I'm fucking in love...i want these for my S6.. do u ahip to germany? 😄
@muhdizham1028 Жыл бұрын
Are they really strong
@CarbonWorkshops Жыл бұрын
Yes very strong
@film2gasp Жыл бұрын
Where do u buy your materials?
@CarbonWorkshops Жыл бұрын
Easy composites
@mauriziogiasan4411 Жыл бұрын
prepeg?
@CarbonWorkshops Жыл бұрын
Yes
@user-se8lv4us6c Жыл бұрын
А Негода то не знает :)
@ariehakim9951 Жыл бұрын
Carbon fiber helmet
@benviral9727 Жыл бұрын
Jos tenan..👍 simak video pembuatan tutup fiberglass untuk kapal 👉kzfaq.info/get/bejne/kN2fp7Wdrbe0m30.html
LXGspec
Рет қаралды 79 М.
Easy Composites Ltd
Рет қаралды 832 М.
Easy Composites Ltd
Рет қаралды 1,2 МЛН