How To Make Stickers With Your Silhouette Cameo | The Ultimate Print and Cut Sticker Tutorial

Рет қаралды 71,838

2 жыл бұрын

Hey guys, this is my ultimate guide on how to make stickers at home with your Silhouette Cameo. This is an IN-DEPTH, super DETAILED tutorial where I show you every step in how to make these stickers from different types images. I walk you through setting up in Silhouette Studio, all the way through cutting and peeling the stickers after your Silhouette Cameo has cut everything out.
Get the vinyl sticker paper used in this video at this affiliate link: amzn.to/3bMQeNd
CRAFTING TOOLS AND SUPPLIES:
Silhouette Cameo: amzn.to/36wsKKG
Cameo 3 Roll Feeder: amzn.to/3goQGE1
NICAPA cutting mat for Cameo: amzn.to/3onoDpZ
Silhouette cutting mat: amzn.to/3gceqdh
VViVid transfer tape: amzn.to/3mnv8ex
MY PRINTER: Canon Pixma Pro 100 inkjet printer: amzn.to/3dNQV9b

Пікірлер: 185

@redlibra2096 25 күн бұрын

Amazing tutorial! It was the registration part that most tutorials skip over, BUT that's the most important part! Thought I was going to have to get another machine that would print AND cut. THANK YOU!!

@ColorChangeCustoms 23 күн бұрын

Glad it helped! And thanks for watching!

@mishunkontrol1874 13 күн бұрын

I just upgraded from a Portrait to a Cameo 4 and found this vid. I love what you have posted on your other vids on using vinyl. I'm subscribed and can't wait to see what you do next! Thanks for the tutorials!

@ColorChangeCustoms 12 күн бұрын

Thank you for the kind words, and thanks for watching! I appreciate it!

@abj6766 Ай бұрын

Finally something that shows how to do the square shapes I was going insane. Thank you!!

@ColorChangeCustoms Ай бұрын

Thanks for watching, and glad this was helpful!! Cheers!

@androidlifehack3116 Жыл бұрын

Just as intended. On Point and Simple Tutorial. Great Job! Thank You.

@ColorChangeCustoms Жыл бұрын

Thank you and thanks for watching!

@iekika79 2 жыл бұрын

Great Tutorial! Very thorough and to the point! This helped immensely!

@ColorChangeCustoms 2 жыл бұрын

Thanks and thanks for watching!

@balloonqueenph 2 жыл бұрын

All my questions have been answered finally!!!! Thank you so much!!!!

@ColorChangeCustoms 2 жыл бұрын

Thanks and thanks for watching!

@michaelf.1604 2 ай бұрын

Hands down the best Silhouette Sticker tutorial..and I have watched a lot. Very easy to follow.

@ColorChangeCustoms 2 ай бұрын

Thank you for the kind words. I appreciate it!

@velislavpalin5383 3 ай бұрын

One of the best tutorials I have seen on Silhouette Cameo

@ColorChangeCustoms 3 ай бұрын

Thanks, and thank you for watching!

@rollie785 Жыл бұрын

One of the best tutorials I have seen on Silhouette Cameo. Thank you for taking time to explain everything

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching!!

@DiamondPromotionsATL 2 жыл бұрын

Very Professional Tutorial!!! Thank you so much for being so thorough.

@ColorChangeCustoms 2 жыл бұрын

Thanks and thanks for watching!

@NaskaZo Жыл бұрын

Finally all tutorial! Thank You!!! ♥

@ColorChangeCustoms Жыл бұрын

Your're welcome, and thank you for watching!

@lorettamoshier1795 11 ай бұрын

Awesome! This explains so much so well. Gave me the confidence to try stickers.

@ColorChangeCustoms 11 ай бұрын

Thanks and thanks for watching! I’m glad the video was helpful 😊

@aanfimova 2 жыл бұрын

Thank you! Helpful video, finally got my stickers printed and cut!

@ColorChangeCustoms 2 жыл бұрын

Thanks and thanks for watching! Glad the video was helpful!

@KattPutt Жыл бұрын

This is the BEST tutorial I've watched yet. Thank You:)

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching! Glad it was helpful

@geekdaniel7595 6 ай бұрын

Ludicrous speed, go! Thanks for the tutorial, very helpful!

@ColorChangeCustoms 6 ай бұрын

Thanks and thanks for watching! Glad it was helpful

@yourunclesam6780 11 ай бұрын

AMAZING VIDEO .Thank you for taking time to explain everything. I have never seen a tutorial like this.Thank youu

@ColorChangeCustoms 11 ай бұрын

Thank you and thanks for watching!

@floralscentkim1380 5 ай бұрын

Wow! Absolutely amazing tutorial! Thanks much

@ColorChangeCustoms 5 ай бұрын

Thanks for watching! I'm glad the video was helpful!

@venominyoureye 2 жыл бұрын

This was extremely helpful! Thank you

@ColorChangeCustoms 2 жыл бұрын

Thanks and thanks for watching! Glad it was helpful.

@whimsypics 8 ай бұрын

So glad I found this - thank you! I've used my cameos for so many years for vinyl. I'm excited start making stickers, too! THANK YOU.

@ColorChangeCustoms 8 ай бұрын

Thank you and thanks for watching!

@brandondicks9153 8 ай бұрын

Great use of the Offset tool! Great video!

@ColorChangeCustoms 8 ай бұрын

Thank you and thanks for watching!

@broneciamchuen8195 Жыл бұрын

Thank-you for sharing your talents

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching!

@yemarican 2 ай бұрын

This is golden ... thank you very much dude.

@ColorChangeCustoms 2 ай бұрын

Thanks! And thanks for watching!

@The_Legend_of_Gaming52 2 жыл бұрын

Nice stickers!

@Sforza_ 4 ай бұрын

I have looked for a tutorial on this specific subject and this is by far the most informative out there.

@ColorChangeCustoms 4 ай бұрын

Thank you and thanks for watching!

@shyashcypert5783 11 ай бұрын

This made more sense than any other video I have watched. Thank you for showing this step-by-step!

@ColorChangeCustoms 11 ай бұрын

You're welcome and thanks for watching!

@suerankin7943 7 ай бұрын

Fantastic tutorial! Exactly the sticker making instruction I was looking for! Thank you for explaining everything so clearly and simply. I've been looking forward to receiving my Cameo 4 and now I feel like I'm ready to hit the ground running!

@ColorChangeCustoms 7 ай бұрын

Thank you for the kind words and thank you for watching! I'm glad the video was helpful.

@karenhaley81 6 ай бұрын

Thank you so very much - you explained the process perfectly!

@ColorChangeCustoms 6 ай бұрын

Thanks and thank you for watching! I'm glad this was helpful!!

@LordPutARingOnIt Жыл бұрын

Excellent tutorial. Best one and very thorough. You made this simple to understand Thank you.

@ColorChangeCustoms Жыл бұрын

Thanks for watching and thanks for the kind words! I'm glad the video was helpful. Cheers!

@fawnnelson3369 Жыл бұрын

Best sticker video ever!! Thank you - I'm a new subscriber!!

@ColorChangeCustoms Жыл бұрын

Thank you and thanks for watching!!

@o0oTyPow Жыл бұрын

So far the best! I have been looking for a video that had everything from beginning to end.....unlike the others that make you watch 20 videos just to get confused! I'm glad I found this!!

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching! Glad the video was helpful

@caymac628 Жыл бұрын

great tutorial easy to follow. thank you.

@ColorChangeCustoms Жыл бұрын

Thank you and thank you for watching

@rrriot22 Жыл бұрын

Awesome video! I have watched dozens of how tos for stickers and yours is the first one that makes me feel like I can do it. Thank you!!

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching!

@taralerum1782 Жыл бұрын

I agree! Best video EVER!

@onlysublime 4 ай бұрын

super useful video! thanks for making it! thanks for showing how to use the silhouette software. I'm brand new to the silhouette cameo 5 (just got it yesterday) so glad to see a silhouette tutorial! I'm a heavy Adobe user so I'll probably be using Photoshop to prep the image but nice to see how to do it in Silhouette. subbed!

@ColorChangeCustoms 4 ай бұрын

Thanks, and thanks for watching! I'm glad the video was helpful. Let me know if there's anything in particular you might want me to make a video on with regards to using silhouette studio or the cameo. Cheers!

@setthathongphanith1368 Жыл бұрын

Hey man, great tutorial. Was able to make my first stickers with my Cameo thanks to your vid.

@ColorChangeCustoms Жыл бұрын

Awesome! Glad it helped. Thanks for watching! 🙏

@lancenguyen9175 9 ай бұрын

Appreciate the video. Thank you for making it.

@ColorChangeCustoms 9 ай бұрын

Sure thing! Thanks and thanks for watching!

@davidcochran934 2 жыл бұрын

THis worked perfectly for me. NOw I just have to try and cut it. Great video.

@ColorChangeCustoms 2 жыл бұрын

Awesome, glad it worked!

@eddie.on_bikes Жыл бұрын

Awesome information. Thank you so much.

@ColorChangeCustoms Жыл бұрын

Thanks! And thanks for watching! Glad it was helpful!

@pennybarr 2 жыл бұрын

Great job. This is one of the better videos I have watched so far.

@erickrocks1126 2 жыл бұрын

Thank you and thanks for watching!

@ColorChangeCustoms 2 жыл бұрын

Thank you!

@mycreativeescape 10 ай бұрын

excellent tutorial! Thank you ! Subscribed! :)

@ColorChangeCustoms 10 ай бұрын

Thank you and thanks for watching and subscribing!

@ohyetgalicia2489 8 ай бұрын

Best Tutorials Thank you.

@ColorChangeCustoms 8 ай бұрын

Thank you and thanks for watching!

@onlysublime 4 ай бұрын

The Canon Pixma Pro 100!!! I love that printer! Stickers don't do it justice. I print huge photographs on this printer and it's so gorgeous.

@ColorChangeCustoms 4 ай бұрын

It is a great printer! However, I hate how it burns through ink so quickly and how expensive the ink cartridges are to replace. But otherwise, a great printer!

@kidvicious2227 Жыл бұрын

Another great video

@ColorChangeCustoms Жыл бұрын

Thank you and thanks for watching!

@mikidebussy19 5 ай бұрын

I have had the Cameo 3 for about 7 yrs. Just got the 5 because I have had 0 luck with print and cut (birthday gift hehe) and omg your video is amazing! Thank you for such a detailed process!!!!!

@ColorChangeCustoms 5 ай бұрын

Thanks and thanks for watching! Glad the vid was helpful ☺️🙏

@EverydayZach Жыл бұрын

dude. I usually don't sub to tuts but you got yourself one MASSIVE sub! I have been looking for so damn long! Thank you! a million thank yous!

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching! I appreciate it! 🙏

@marleymarley1360 4 ай бұрын

Hello, Thank you for this clear and concise video. I have the silhouette cameo 4 with the business edition and the cricut maker which had first. I have preferred working with the cricut design studio vs silhouette business studio. My cricut maker is down as I am having to replace those darn rollers so I am forced how to learn how to use Silhouette business studio on a regular basis. I look for tutorials that are clear, concise and not too long. This video is definitely one that I can learn from. I can pause it and work along with you. You definitely have a new subscriber. Love it.

@ColorChangeCustoms 4 ай бұрын

Thank you so much, and thanks for watching!

@BUCK50BRAND Жыл бұрын

Great tutorial

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching!

@RCWalletVacuum 9 ай бұрын

Very well done and professional video

@ColorChangeCustoms 9 ай бұрын

Thanks and thanks for watching!

@daricezdrazil7399 9 ай бұрын

Excellent tutorial!

@ColorChangeCustoms 9 ай бұрын

Thank you, and thanks for watching!

@daricezdrazil7399 9 ай бұрын

Your very welcome!

@jmellon9701 Жыл бұрын

Best video ever.

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching!

@miguelsemidei7619 4 ай бұрын

Excellent video

@ColorChangeCustoms 4 ай бұрын

Thank you very much! And thank you for watching!

@lakeshamoniqueofsubroidery7413 2 жыл бұрын

thank you for this

@ColorChangeCustoms 2 жыл бұрын

You're very welcome! Thank you and thanks for watching!

@habanero6332 3 ай бұрын

Lovely calm voice.

@ColorChangeCustoms 3 ай бұрын

Thank you, and thanks for watching!

@jermainejennings1514 10 ай бұрын

I love you!

@lifeiscool2957 3 ай бұрын

Thank you sir

@ColorChangeCustoms 3 ай бұрын

Thanks for watching!

@sik05civic 4 ай бұрын

I just purchased some glossy printable sticker paper, my plan is to do some micro stickers for RC car’s I have the cameo 4 hopefully it has the option to do this with the registration mark’s etc if not I’ll at least be able to print stickers and cut them by hand

@ColorChangeCustoms 4 ай бұрын

Thanks for watching! Your project should be totally doable with your cameo 4. My cameo 3 is older, but it can cut some pretty small areas, just based on making vinyl decals with a lot of detail in them. I'm pretty sure the cameo 4 would have no problem.

@Babsywoohoo 7 ай бұрын

This was a great video! Thank you for being so thorough. I would like to use my cameo for making stickers since cricut doesn't give us a larger print and cut area. I have a laser printer and would like to know what clear laminate would you recommend to make these extra waterproof and last longer? Thanks!

@ColorChangeCustoms 7 ай бұрын

Thanks and thank you for watching! As far as laminates go, I've used this Oracal one in another video where I laminated stickers (kzfaq.info/get/bejne/gsxzi9yq25yZdZc.html) Here's the affiliate link for that laminate on Amazon: amzn.to/3utX4n3 Happy sticker making!

@samyoung6380 2 жыл бұрын

Thanks

@ColorChangeCustoms 2 жыл бұрын

You're welcome, and thanks for watching!

@Kewlstickers Жыл бұрын

thanks for serving your country

@samyoung6380 Жыл бұрын

@@Kewlstickers It was an honor, thanks for supporting the Vet's in any form

@JO86666 Жыл бұрын

Your video was great, super detailed thanks!! Is there a cheaper color printer you recommend though? That printer your using is a little bit out of my budget 😬

@ColorChangeCustoms Жыл бұрын

Thank you for the kind words, and thanks for watching! I haven't looked at printers in a while since buying the one I have, but on various craft forums, the Canon IP8720 comes up (amzn.to/3mz30Y1) as a decent, overall printer. Also, Epson printers seem to come up a lot as well among the various forums I've scrolled through.

@IKilledYourDude 4 ай бұрын

I loved the video! I am considering purchasing a Cameo or Cricut to print vinyl stickers. I saw that apparently the Cricut doesn’t work with laser printers (which is what we have) so my question is, does the Cameo work with laser printed items? Sorry if it’s a silly question … but I really don’t want to get something that won’t work with our printer. Thank you for the video and the help!!

@ColorChangeCustoms 4 ай бұрын

Sorry for the late reply. Honestly I’m not sure since I have an inkjet style printer only. However, to me, it seems that it should work with a laser printer since all you are doing is sending an image file to a printer to be printed out, regardless of whether it is a LaserJet or an ink jet. But again since I don’t have a laser printer. I cannot tell you for sure.

@CourtneyTheeArtiste 11 ай бұрын

Hi. I love your video & how in depth you are w/your process! So, I have a Portrait 3 & I’m having an issues where my text stickers, which are die cut, aren’t being cut as one whole sticker but as single words. Is there something that I should be doing differently??

@ColorChangeCustoms 11 ай бұрын

Hi sorry for the late response. Have you tried using the weld function on the letters? Some fonts have a separation or slight overlap built in that may be causing the issue.

@CourtneyTheeArtiste 11 ай бұрын

@@ColorChangeCustoms you're fine! I just appreciate you replying. And no, I haven't! I'll look up how to use it & see how that helps. Thank you!

@ChiquisJ70 Жыл бұрын

Best tutorial ever!! thank you so much for uploading this video and taking time to explain it thoroughly!! I do have a question, if I don't want the sticker to be cut all thoroug The paper, What settings do I need to use Like you did it on the 1st time, where all this stickers stayed on there sticker paper??

@ColorChangeCustoms Жыл бұрын

Thanks and thanks for watching! As far as settings to do a "kiss cut", which is cutting the vinyl but not the paper, I used: Depth: 1 Force: 7 Speed: 5 However, I came to those settings after basically sacrificing a sheet doing a bunch of cuts to see which settings would do what I wanted. Every machine will be slightly different due to a lot of factors -- blade type, age of machine, using a mat or not, brand of sticker paper or vinyl used, etc. So for your machine, I would recommend doing a bunch of tests at various depths/force/speeds to see what would work best, then save them as a custom pre-set.

@ChiquisJ70 Жыл бұрын

@@ColorChangeCustoms Thank you so much for helping me with this and most of all for getting back to me 😄

@ColorChangeCustoms Жыл бұрын

@@ChiquisJ70 sure thing! Good luck and thanks again for watching!

@TexasBeekeeper Жыл бұрын

Hello, I need some help if you can please. What format did you bring the graphics for this video in? I have studio Basic and am trying to print and cut my own Honey Labels. I designed them in Inkscape and exported them to a nice high quality PNG. But when I bring them in to Silhouette Studio, they get pixelated. Also when I print from Silhouette Studio they are horribly pixelated and you can't even read the text. Is there a setting that I'm missing somewhere? Would you have any suggestions for me to try? Thank you!

@ColorChangeCustoms Жыл бұрын

The pictures I used were .jpg, maybe one was a .png if I recall. However, regardless of format, the key is to use images with high resolutions to start with. I'm not sure why your silhouette is making them pixelated specifically, but if you are creating pictures in a program to bring into silhouette, save them at a high resolution--like 1000 (or more) x 1000 (or more) pixels. Same if you are bringing in images found on the web. I go for images that are minimum "Standard HD" resolution, meaning the image is at minimum 768 x 480 (or vice versa) pixels and higher.

@alexiamendoza2719 Жыл бұрын

hi when I upload my design it is all outlined in red. What step am i missing?

@megdoidge 7 ай бұрын

Not sure id I just missed it, did you show the cut settings for not cutting all the way through?

@ColorChangeCustoms 7 ай бұрын

Hi there, thanks for watching! It's towards the end at around 20:40, but the settings I used in the video were: Depth: 3 Force: 20 Speed: 5 It cut all the way through for me, but I'd probably bump the force up a bit more. But...you would have to do a couple of tests to see what works for your machine and media you are cutting. The settings I used are just a starting point that worked for my setup. Happy crafting!

@shortbushero 3 ай бұрын

The video is great and concise. However, is there a certain grade of vinyl for this method of sticker that CAN be used for car decals/ drift slaps that face the elements? This method is far better than layering.

@ColorChangeCustoms 3 ай бұрын

Thanks, and thanks for watching! For your question, yes. There is printable automotive grade vinyl wrap and overlaminate you can make stickers/decals from. The challenge is that printable automotive vinyl and laminate are not typically accessible to everyday users. The wrap shop I work at has huge printers, laminators, and cutters that cost more than peoples houses!! My recommendation is to see if there is a local vinyl wrap or sign shop (or maybe an online one) that you can provide your graphic to, which they can then make the sticker for you (but this can be a pricey option).

@shortbushero 3 ай бұрын

@@ColorChangeCustoms I see, I figured the vinyl quality you’d get access to on sites like redbubble would or could be afforded and bought for these printers.

@zion4453 Жыл бұрын

Hi I’m planning on buying the Cameo 4 I’m just scared of the print and cut issues. Can you advise me on this? thanks in advance

@ColorChangeCustoms Жыл бұрын

Hi, thanks for watching. I don't have a Cameo 4 so I'm not familiar with the issues. My best advice would be to research across multiple and various forums to see if anyone has figured out what the issues are, ignoring the extreme left and right comments that offer no substance, look for inputs that have meaningful information, and then make a decision. In my experience, most "issues" with any kind of machine, particularly electronic types, can usually be traced back to user error, though I don't discount machines do have issues on their own. That's my experience though. Sorry that's not much help, but it's all I can offer.

@lorrainelawing8154 Жыл бұрын

I can’t go back and find the settings for your first demonstration. I don’t want my blade to cut all the way through. What are those cut settings ??

@ColorChangeCustoms Жыл бұрын

For a kiss cut, I used blade depth: 1, Force 7, and Speed 5 with autoblade. *** However, use that only as a starting point.*** Bottomline, you'll have to experiment with what works for your machine. You may have to sacrifice part of a sheet to see what works for you as there are other variables to consider, like if you are using a mat, the brand of sticker paper, is the paper matte or gloss, vinyl or actual paper, etc. The settings I found to work on my Cameo may not work for yours depending on calibration, newness of blade, Cameo model (2 vs 3 vs 4), etc.

@AmpharosReyvont 2 жыл бұрын

what if I put a laminate on top do I add blade depth or add force

@ColorChangeCustoms 2 жыл бұрын

You may have to do both and experiment to see what would work. Here’s an older video I made where I laminated stickers and then cut, which might help. How To Print and Cut with Silhouette Cameo | Make Full Color Waterproof Stickers at Home kzfaq.info/get/bejne/gsxzi9yq25yZdZc.html

@Kewlstickers Жыл бұрын

@@ColorChangeCustoms I had the same question and after watching this additional video it helped.

@Joeistheone_ 4 ай бұрын

good job bud . But I still dont get something . now your sticker sheet has 2 layers right ? the top one is sticky stickers . what is the bottom layer ? is it the material of these papers that let you have 2 layers in one sheet ?

@ColorChangeCustoms 4 ай бұрын

Hi and thanks for watching. The stickers are just 1 layer--the actual sticker layer that has the adhesive on it on one side. The only other layer would be the backing paper it is on that you peel the sticker off of.

@introhub8214 Жыл бұрын

Can we do that print and cut using cameo 3?

@ColorChangeCustoms Жыл бұрын

Yes, I did this project with the Cameo 3 and Silhouette Design Studio. For my printer, I just used a Canon Printer since the Cameo is not a printer.

@alyenmations2627 5 ай бұрын

Okay so the cameo printed the stickers and cutted them or did you use another printer for printing?

@ColorChangeCustoms 5 ай бұрын

You would use a separate printer to print the stickers, then the cameo cuts them

@dandee28 Жыл бұрын

any idea why theres glue residue particles on my stickers when it finishes cutting? i dont know if its the material. have you come across this issue , I use the exact same gloss paper and same cutting mat too!

@ColorChangeCustoms Жыл бұрын

Hey there! I've not had that issue on my end, but something that it might be...as the blade is cutting, some of the adhesive is sticking to the blade. As the blade moves along, it may be leaving some of the glue that stuck to it on various parts of the sticker paper. Maybe try a new blade or sharpening and cleaning your existing blade (google "how to sharpen silhouette cameo blade")

@dandee28 Жыл бұрын

@@ColorChangeCustoms thank you I'll try that out!

@user-jc4qx3jb2e Жыл бұрын

My registration mark on the bottom right will only print 1 line. Any ideas on how to fix this?

@ColorChangeCustoms Жыл бұрын

Without seeing your specific issues in person, the first thing that comes to mind might be ensuring your media size is correct for the size of the media you are using. If you're using an 8"x11" sheet but your media size is still on the default 12" x 12", it will try to print incorrectly. The other thing I can think of is maybe ensure your Silhouette is calibrated. Silhouette Studio has a calibration function and it has instructions on performing the calibration

@Techno_Boy001 7 ай бұрын

hey hey hey its this same ploter printing and cutting? or i can print on other printer and cut it on Silhouette Cameo 4 Pro

@ColorChangeCustoms 7 ай бұрын

Print separately using your printer then cut with the Cameo.

@Techno_Boy001 7 ай бұрын

ok ty really cool video @@ColorChangeCustoms

@ColorChangeCustoms 7 ай бұрын

@@Techno_Boy001 thanks!

@xxxsharpie08xxx Жыл бұрын

I’m having the hardest time with registration marks error. Any tips?

@ColorChangeCustoms Жыл бұрын

Have you tried recalibrating your Silhouette? Also I’ve seen posts on different forums that say to ensure there is a lot of light for your cameo while it is cutting. Some people have even put LED light strips on their cameos to help.

@winkle8715 2 ай бұрын

What kind of printer do you need to actually print the stickers?

@ColorChangeCustoms 2 ай бұрын

I'm using an injet printer, a Canon Pixma Pro. You can also use a laserjet printer if that's what you have. But really, any decent home printer will work. The important part is to get the type of sticker paper suited for your printer, inkjet or laserjet. Here's an affiliate link for sticker paper for printing with an inkjet: amzn.to/4cNU7j1 And here's an affiliate link for sticker paper for printing with a laserjet: amzn.to/49rncOf Hope this helps!

@winkle8715 2 ай бұрын

@@ColorChangeCustoms thankyou

@annagabiz Жыл бұрын

Hi. Do you know why my stickers are coming with dull color 😢😢😢😢😢😢😢😢😢? When I print direct from my mac it comes good...just from the Cameo machine it is coming dull(pdf and print). I tried everything and I couldn't find this information in any website

@ColorChangeCustoms Жыл бұрын

My guess is it's probably your printer since the Cameo isn't a printer, just a cutting machine.

@annagabiz Жыл бұрын

@@ColorChangeCustoms Sorry I mean Silhouette Cameo SOFTWARE no machine,When I press "Print " from the Silhouette Cameo software ...😁

@anniehenderson1077 Жыл бұрын

What type of paper do I need

@ColorChangeCustoms Жыл бұрын

I like to use glossy sticker paper. This is what I used in this video: amzn.to/3bMQeNd

@dabbintongarage Жыл бұрын

how do i remove my designs from a black back ground? struggling send help 🤣

@kanyewest5722 11 ай бұрын

What ink you use

@ColorChangeCustoms 11 ай бұрын

Just Canon OEM ink, if I recall. I have used generic ink since because of how expensive the OEM ink can be. Here's a link to those inks I've used: amzn.to/3q4UHp4

@scottdow81 Жыл бұрын

Where is the color coming from?

@ColorChangeCustoms Жыл бұрын

The stickers are printed using a printer before cutting them with the Cameo.

@MiguelGonzalez-vh1ny Жыл бұрын

No lamination?

@ColorChangeCustoms Жыл бұрын

You can laminate if you want afterwards. These stickers were intended for indoor, non-wet use, like putting on a laptop lid, so no lam needed.

@jermainejennings1514 10 ай бұрын

Please help me, I need your help.😢

@chrinamint 6 ай бұрын

Well this was two years ago so I don't know if you're going to see this but I just came across it and I love the video it was awesome but... You kind of lost me with the blue offset line that you made. I don't understand The purpose of that... You went through all that trouble to fix the offset to be as close as possible to the image so you would not have that extra white in a previous step, so why now would you want to make a second line so that you have to change the color to make it have more white? Why wouldn't you have just done that in that previous step and not have to make a second line? I rewound and watched again to see what I was missing and I just can't understand why you would need to do that.

@ColorChangeCustoms 6 ай бұрын

Hi, and thanks for watching. If I'm understanding your question correctly, basically the offset is to add a "border" of sorts around the now detached image. That way there's a little bit of white around the sticker when you peel it. However, having that border is totally up to the user -- you don't have to do that if you don't want any white around the image. Once you have your image traced and detached, you can just send it to cut the actual edges of the image. It's really however you want the sticker to come out, with a border, or not.

@chrinamint 6 ай бұрын

@@ColorChangeCustoms I know but you had already done that. Then later you added this blue one and then you had two separate things, the red one in the blue one. That extra one that you made I didn't get.

@porter4lifedp 6 ай бұрын

When you trace the design a red cut line appears then when you add your offset another red line appears he changed the color to blue so the machine will cut the outline instead of the image. Instead of changing the color you can also click on the image and turn off the cut line. I hope that makes since.

@Duder_abides Ай бұрын

I so wish this worked. It's so bad.(Device not your method, no critique there) Cant read registration mark! Can't use gloss paper. Can't use glitter paper (print and cut)

@ColorChangeCustoms 27 күн бұрын

Sorry to hear that. I use gloss paper all the time and haven't had issue (I've not used glitter paper though). I have seen on some forums that when the Cameo can't read the registration block and marks, to ensure the area your Cameo is in is well lit. Not sure if that would work in your case.