Glad it was helpful!

Happy to hear that, thank you! I used Freedom Soy Wax for the frosting. It looks like real frosting 😃

I used the same wax and it's not coming out that

I just use the hand whisk!

Hi, what is the type of wax that you use? There's so many different kinds. But as long as it's wax for container candles, it shouldn't dry up so fast and clog your nozzle. I experimented a lot with different types of soy wax and one time I used Pillar candle wax and it dried so quickly! But in general that wax is not meant for jar candles.

For sure!

If it’s the right type of wax it won’t harden super fast! Make sure you’re using wax for Container candles, it will stay soft long enough to pipe it. Wax that’s used to make candles in molds will harden in seconds when you try to pipe it!

​@@alexakravcraftystudioWhich wax is used for container candles?Soft soy wax is okay?

Yes I used real sprinkles!

​@@alexakravcraftystudio How do you get your sprinkles to stay? They always fall to the bottom when I pour my wax in.

This happens when you use a wrong type of wax. Do you know what wax you were using?

Alot of those issues are impacted my temperature.... temp of the room, of the glass and of the wax at pouring ... have you tried controlling temps

@@anamasias9013 I tried pre heating the vessel. It seems to help it a little more. And buying different wax.

@Tara yes definitely there are waxes more proned to frosting and sinkholes but if you have ome that has natural additives for those things then the biggest factor will be temperature... i struggled so hard at the beginning and i knew the room i work in was colder than it should be but i like the cold (dont like the heat) so i didnt want to accept that id have to add a digital temp controlled heater in that room ... after more struggling .... i decided to put thermometors in every room of my house tonsee the difference...and my candle room was 65°f ... and on days it gets cold it drops to about 60..(no insulation in the walls) ... so basically i had to really work to control the room temp and it has helped soooo much. . It has not completely erased frosting or sinkholes but it happens ALOT less now .... sorry for the long story! Goodluck! I hope it helps!

I used Freedom Soy wax for this

Yes wax intended for molds will harden very fast! But I’m not sure why the pellet wax you use for container candles also hardens fast. The wax I’ve used in the past for container candles was Freedom soy wax or Parasoy-this one is a blend of paraffin and soy but creates beautiful candles with a strong scent! Both waxes work great for piping!

Τα κατάφερες τελικά;;Εγώ προσπάθησα με σκληρό κερί σόγιας και ακριβώς όπως εσύ,σκληραίνει πάρα πολύ γρήγορα...Δοκίμασες και με C3?Πώς πήγε;

​​@@despina250κορίτσι εγώ το έχω κάνει με c3 και βγαίνει μια χαρά , μετά από μια δυο προσπάθειες ανακάλυψα ότι το κερί όταν το χτυπήσεις δεν πρέπει να πέσει πριν το βάλει στο σακουλάκι κάτω από τους 30 βαθμούς,μοιάζει σαν κρέμα αλλά με το που μπει στο σακουλάκι με το σωστή μύτη βγαίνει μια χαρά και σταθερό. Τουλάχιστον έτσι συμβαίνει σε εμένα. Και εγώ στην αρχή είμαι και κάνω πειράματα. Ελπίζω αν σας βοηθήσει 😊

@@athena9581 Ευχαριστώ πάρα πολύ,θα το κάνω έτσι😊.Ωστοσο αυτή τη στιγμή έχω μόνο C310, είπα να το δοκιμάσω ,το έχεις δοκιμάσει αυτό για σαντυγη;

@@despina250 ναι ναι το ίδιο θα βγει όλα τα μαλακά με αυτήν την τεχνική μου βγαίνουν το ίδιο. Επίσης εγώ έχω πάρει μίξερ και το κάνω με το μίξερ και γίνεται πολύ γρήγορα ☺️

No ideal temperature. It’s a bit of trail and error. You just have to keep whisking the wax until you reach the right consistency; not too runny and not too hard.

I’m not sure, I haven’t worked with straight paraffin wax. But I have used a blend called parasoy and it definitely worked!

hey! i use paraffin wax and it works great!!

I used a heat gun to melt the wax and then wipe it with paper towel

Parasoy wax

​@@alexakravcraftystudio U mean, it's a blend of paraffin & soy wax?? Can u give us the ratio that u take ofvparaffin & soy wax... 🙏🏻 ❤️ Mumbai India 🇮🇳