How To Make Your ARRMA Infraction 4x4 MEGA Brushless and Make It Mean!

No video

How To Make Your ARRMA Infraction 4x4 MEGA Brushless and Make It Mean!

Рет қаралды 22,812

CCxRC

Күн бұрын

Пікірлер: 68

@jdpasltrains 2 жыл бұрын

I like that programming card so simple.

@rcguygarage 2 жыл бұрын

Did you just stub your toe when the camera took your picture😂🤣

@scaleworksRC 9 ай бұрын

If you're worried about damaging stuff from prying multiple times, you could also use a dead blow or rubber mallet to knock that part loose.

@RoadsideRC 2 жыл бұрын

Excited to see what you do with it next - now that it has some really good power!

@rrrccc1571 2 жыл бұрын

Great video, something chilled to watch while having my morning coffee

@jessjoshwyatt3571 2 жыл бұрын

If you update the esc you get more settings including 7.4 on the bec I believe

@jaceSHO Жыл бұрын

Just what I was looking for with these $149 Infractions - you gots a NEW SUBSCRIBER !!!

@dannyman574 2 жыл бұрын

my buddy did this last weekend with his infraction and he is running 4s lipos. thing is absolutely insane. the 9turn burns up instantly after doing donuts.

@bryanrupple7441 2 жыл бұрын

Thanks for sharing the upgrade details.

@CCxRC 2 жыл бұрын

No problem. Run footage coming soon. Shot the video already. It’s quick!!!

@thejeepinrealtor5742 2 жыл бұрын

A mega is on the way!

@MudMonsterRacing4 2 жыл бұрын

Dont forget to add the center driveshaft bearing brace.

@CCxRC 2 жыл бұрын

That’s a good add

@dskokos77 Жыл бұрын

Once you put these $220 dollar worth of upgrades in does the car perform better than a typical Venedtta or Infraction brushless out of the box? Or is it perhaps faster? Anything else needed to support these mods?

@GreatLakesRC 2 жыл бұрын

Did you set your end points 🤔 Arrma needs to offer this as a brushless option 👍

@CCxRC 2 жыл бұрын

You know what. I totally didn’t. I’m usually changing to my DX5 rugged from a stock radio and don’t need to because the RTR electronics are already calibrated for Spektrum radios which are all so closely calibrated that it isn’t necessary. Totally blew it off. I doubt these are calibrated to Spektrum as they haven’t been programmed for an RTR

@raymonde.tanneratomic-rc9370 2 жыл бұрын

Like the body style of the body

@johnarmstrong5074 Жыл бұрын

Can you post a link to what drill your using and the attactments? Please

@GarageLifeRC 2 жыл бұрын

Heck yeah Tony. Nice video man

@therchotspot 2 жыл бұрын

Nice man. Looking forward to see what you do with yours. I have one I made brushless too running on 6s

@asfbi 2 жыл бұрын

What combo? How's it hold up

@LucianTugui 3 ай бұрын

why there's a need for a new spur gear?

@jamiefox8670 Жыл бұрын

Wonder if the hoss motor would be a nice setup for this?

@LuBiBochum 2 жыл бұрын

Very good. !!!! Thanks for this video.

@Acornejo02 Жыл бұрын

Is this brushless motor the same one that comes in the big rock ? I got a spare one laying around and I was wondering if I can use it for my son's infraction Mega and save some $$

@alanchamberland2656 Жыл бұрын

How did you connect the controller to the esc

@reddeerrebelrc6674 Жыл бұрын

No esc to receiver calibration?

@superstatus2640 Жыл бұрын

Is the new spur gear plastic?

@asfbi 2 жыл бұрын

Can get get by long without the aluminum housing

@stickfurniture02 2 жыл бұрын

Get the middle support for driveshaft.

@DomVito87 2 жыл бұрын

Considering getting this for a off-road track they have …

@rogerrigg7520 2 жыл бұрын

My comment went to you instead of another channel, my bad!🤪

@user-vb3dg3pb6s Жыл бұрын

Why wouldn't you give it a clean up before the build

@elijahwoodward3404 2 жыл бұрын

How’s you slipper clutch holding up? Great video!

@CCxRC 2 жыл бұрын

Haven't been able to drive it because of snow.

@asapplayz6912 2 жыл бұрын

is this a good drift car?

@Piaspeedy 2 жыл бұрын

does a 1/8 scale motor fit?

@gillian9178 2 жыл бұрын

You really should use the Aluminium motor mount plate when going brushless, the motor can move mounting the extra power of the brushless motor has. Otherwise it can move when mounted to the stock plastic motor mount.

@CCxRC 2 жыл бұрын

Yes. I ordered one and the driveshaft support

@joshuarodriguez7654 2 жыл бұрын

What if I’m not running lipo battery’s currently? I don’t have a smart programmer. I ordered this set of motor and ESC because I keep burning up the 9turns. What should I do to change the setting in to NIMH battery? Also, is the pinion and gear needed to change with this set up? Just want to make sure I have everything ready.

@CCxRC 2 жыл бұрын

You can program it from the buttons on the ESC. You can also use Nimh

@JamrsRC Жыл бұрын

This would be easier for you next time if you dip the whole car in mud and then try to work on it!

@ThatsQuacktastic 2 жыл бұрын

Is there a brushless motor option that can be used with the stock esc? I am looking for my first rc besides a crawler and dont need anything crazy fast.

@CCxRC 2 жыл бұрын

Unfortunately no. This ESC only works with Brushed motors. Are you looking for on-road?

@jadenjamison5435 2 жыл бұрын

what’s that tool called you used to take the spur gear assembly apart?

@CCxRC 2 жыл бұрын

The funky shaped one that came with the car or the electric screwdriver?

@jadenjamison5435 2 жыл бұрын

@@CCxRC the funky shaped one! i gusss i didn’t realize it came with the car i never looked inside of my box haha. i appreciate the reply tho!

@0123abcd1 2 жыл бұрын

How has that pinion gear been working out for overall bashing Did the same upgrades you did just don't want to burn anything up Running full throttle :)

@CCxRC 2 жыл бұрын

I swapped out to the 3s slipper setup

@0123abcd1 2 жыл бұрын

@@CCxRC do you have a link for that item?

@stevewest7260 2 жыл бұрын

Forgot a center brace for the drive shaft.

@CCxRC 2 жыл бұрын

Sure did.

@addicted2rcs49 2 жыл бұрын

Hey there my KZfaq friend, how could I make my Arrma Big Rock Crew Cab 3S faster without having to upgrade it to a 4S upgrade kit. Would I have to get a smaller or bigger pinion gear?? Please let me know. 👍

@bmc_rc6212 2 жыл бұрын

Get a bigger pinion gear, 20t piñon Rips in my typhon

@addicted2rcs49 2 жыл бұрын

Thanks for your help mate. 👍

@jessjoshwyatt3571 2 жыл бұрын

Don't forget the bigger pinion is not made for bashing only blacktop speed runs. Motor will run hotter the bigger the pinion or smaller the spur

@addicted2rcs49 2 жыл бұрын

Right OK thanks for that info, I'll just leave my Arrma Big Rock Crew Cab 3S as it is.

@addicted2rcs49 2 жыл бұрын

I'll upgrade everything to make it a 4S setup instead.

@0123abcd1 2 жыл бұрын

Are you running a 3S or a 4S battery on this setup?

@CCxRC 2 жыл бұрын

Just 3s

@raymonde.tanneratomic-rc9370 2 жыл бұрын

Where did you get the work mat's at?

@CCxRC 2 жыл бұрын

CowRC.com

@christopherpaluck737 Жыл бұрын

Why not clean it up first?

@CCxRC Жыл бұрын

Time. I was needing to get it out and running.

@numbnnuts1 2 жыл бұрын

I put a 150 amp firma a 5900kv brushless ON 4S. Regeared. And a driveshaft bearing.6s is next GPS SAID 134 MPH ....... DONT FORGET THAT YOU WILL DESTROY IT