Thanks hopefully this was helpful!

@@GreenK9148 please make part two on core i want a tutorial on dynamite battle cores i will also be doing that when i start making beyblades.

@@sephiroth2776 sure! it'll take some time to make but it is on my agenda.

I’m glad that this video helped!

Np np, glad you enjoyed the video!

Thank you so much for the support! To answer your question for the screws, crazyaries, the person who made the templates, recommended to use M2x4 mm or M2x5 mm screws. It sounds very exciting for students to learn how to mode beyblades! If there is anything that weren’t said or clarified in this video, please let me know.

@@GreenK9148 thank you so much for getting back to me that is so helpful thank you so much. I have all the pieces printed but I am still struggling a bit. I cant get the armor/blade to snap onto to the core. I have watched crazyaries video like 20 times and it almost looks like his 3D printed core is different some how. I'm not sure if you can help but i'm going to keep trying to figure it out

I may have figured it out. On some mordels there are really tiny T shaped clips you can print extra. Not sure yet though

@@matthewgreer2671 Yes there are the clips that need to be there. I don't have the templates for those, although I'm not sure if Crazyaries prints his own or disassembles TT bey cores and uses those. I looked in his template files and couldn't see any. Right now I am trying to make my own template for the T shaped clips. I will post a video once I am done (hopefully soon).

@@GreenK9148 I found some online but because they weren't in the original template. I was super confused and didn't know i needed them. Heads up they are quite hard to print being so small. I think I have everything I need now so things are going well. I'll let you know how it goes.

Planning to soon. Probably going to start recording it after I finish Lucifer Evo

That’s great! Could you please be more specific in what you mean in gears? I don’t really understand what you mean by that.

@GreenK9148 I mean gears form dynamite belial

I think there are some gear templates for belial online, I don't have any atm. But, one thing to watch out for if you do find is if it fits, and if you are going to make your own you should be conservative with the dimensions so it fits.

@@GreenK9148 okay I might

I'm assuming it deletes part of the template or if the issue is something else lmk. So in the clip, the recoil points were sticking into the DB blade (therefore if printed, it would not be compatible with assembly), so I used a hole to cut that part out so it wouldn't do that. I then made sure everything was centered. After that I selected the hole and then ONLY the blade. Then it should work.

Ok I think I get it now thanks

Ok I see my problem now I don’t know how to group objects/shapes without click drag in your vid you just click it but for me I can’t idk why but got any advice?

Never mind figured it out

@@NightSpeed458 Sorry i didn't see this until now, but all you have to do is click one object, hold shift and then click another object while holding shift. Then click group. for reference, I mention this at 3:00

Sadly I don’t have a 3D printer atm. But a good printer (for relatively low price) that I was looking to buy is the ender 3, which is widely used. There are some other options for good low budget printers like the Voxelab Aquila or Anycubic Kobra go. Most of which can be found on Amazon Link: www.creality.com/products/ender-3-3d-printer

I got the Ender 3 for Christmas, but a total amateur, but this is a huge help modeling wise. If we can be of help to each other in the future, im here if anything.

Sure, what gimmick do you want me to make a tutorial on? Part 3 is going to be gimmicks

@@GreenK9148 spin stealing and retraction(just like variares)

ok, ill do my best

@@GreenK9148 thank you so much!

@@GreenK9148 burst locks like on dangerous belial

I'm sorry, I don't quite understand what you are asking, can you please clarify what you are saying for me?

​@@GreenK9148The db ring I think

You can go to their website and click get a quote to upload your file. After you upload the file you can choose what material/color you want and order it.

@@GreenK9148 hey i kinda need help ive got my model in but its not letting me chose the material its saying. It needs to resize or scale your 3d model idk what to

Hi sorry I’ve been pretty busy so I haven’t been checking my emails daily, it’s probably good to verify that you have sent me an email and we can discuss the commission over the email. Thanks for your patience. I will try to get back to your email with the price list soon.

I’m not very experienced with making drivers so atm idk.

sure, what do you need help with?

@@GreenK9148 i dont know how to make it ):

@@trevor_philipstechhelp1525 could you tell me what you are trying to make? It'd be easier for me to help you that way.