me like loud noise me make truk go VOOOOM VOOM then beat rock together. naybor say loud i say FKU NAYBOR! me go VOOM VOOM!!!!

Legends like this are still here. There are some people can’t afford to get exhaust work done.

I did this in high school with my 330K mile 01’ Silverado. It was so damn loud I’d set off car alarms ripping out of the parking lot 😂😂 All that fun for free but gooodness did it run through gas lol

I've had mine the same way for a year and had no problems I drove from Ohio to Tennessee with this setup and back and had no issues of carbon monoxide

I did this it sounds so good, I did die tho

I tried this, it was so fun everybody was yelling at me to go home!

Muffler shops will do turndowns under a truck as long as it's behind the cab. And by the way, those aren't bolts, they're nuts.

Huge thanks to you. Did it in 5 minutes and sounds like a whole new truck

I just used the two bolts that were there and used one nut to be the spacer and one nut to be the tightener and left the other side unscrewed.

My 04 ram hasn’t had a muffler or a Catalytic converter since 2017 and I love it he is LOUD has 308k miles ❤

Thank you , I just did to my truck it sound Soo good & mean.

Got a 2013, same generation but the exhaust doesn't unbolt there. It's a solid run from the converters to the muffler

I did this and the gasket fell out but I found it 🤣, I found the best Is when you Gap it and then put a big nut in between the gap and then bolt it back on. Thank you so much for the video

I did this lol. Dont recommend doing it on a 4.3l tho because it sounds like a giant fart

I was looking at this and was thinking about doing to my truck but I think this was done by the previous owner already by the way urs sounded

Saw your video and gave me an idea I disconnected same where you did and as for the bolts ,I actually connected a dc sports exhaust resonator tip the 33$ or so and gave me some crazy ass results

Yo homie I bought my 07 Titan and it already had this done man that joint is loud as hell great video keep it up 👍🏾 💯

That god I’m not the only one that call nuts bolts all the time

Uh thanks a lot dude! I did this and died of carbon monoxide poisoning!! Wtf

Did this and broke my bolt😂😂

I did this on my 06 Colorado. I didn't realize other people did this.😂

why does mine make a pop and i can feel banging under the truck when it decelerates after i did this

Probably going to get a new muffler instead lol. But good tutorial, obsessing over your voice, keep making stuff similar to the set up of this video! Enjoyed it :)

rip my brother too "carbon monoxide poison" 😇🙏

Subscribed.

Going to try it thanks

Can you still do this if the truck is true dueled?

Thinking about doing this on my 2004 5.3L V8, is this a good idea? I just wanna be loud man

Is this just as loud as cutting the whole muffler off?

Can I do this on a semi truck???

Where can I get the nut? I lost it smh 😂

So what I did was I took a saw and I cut off my whole exhaust system there’s literally not one inch of tube

Did this hurt your gas mileage at all?

Can you just use washers for the spacers??

So... Why didn't you just use washers instead of the original nuts.... Vibration?

Hey bro be careful it can melt your transmission wires

I subscribed!

Nice job but what was coming out of the pipe was oil or gas

But the also makes it look badass. So how do you combine badass and mean

I have a 2011 gmc 2500 am trying to take off the muffler but the treads worn out , to open it is up or down?

Why not just cut the muffler off and weld a pipe in its place ?? Alot safer no fumes going inside your truck

So do it in the open foe how long

How you take them off so easily. I’ve tried and they won’t loosen

Does this mess with the back pressure at all?

Is it dangerous I mean I park my truck outside in the front? Any advice’! Please

Okay I just tried to do this.. there was a lot of rust that sealed the bolt to the nut.. how can I get the nuts off?

Only do this with a truck ?

All you gonna need is a sawzall and you gonna want to cut the Catalytic converter off and boom. Loud ass truck. Don’t actually do that tho.

Does it hurt the engine at all

i will say i never seen anyone do that before

attempting to do this on my 5.7 2017 ram. i’m letting WD-40 sit rn cause they won’t budge. this exact part tho is a lot closer to my front end than yours. like literally parallel to my front wheels.

I'm going to try this out on my truck

Can you also do this with a 2005 ford f150 4.6 v8

I’m confused he never took the muffler off please explain anyone

Won't pass inspection in Massachusetts you could just do a muffler delete or for a few bucks more for the glass pipe

Imma start doing that instead of paying to get it done

I got an 03 monte carlo. Been wanting to do this tbh. Its little 3.8l is nice but I just wanna hear it rumble.

What size socket did u use to get it undone ?

you did an extreme exhaust leak! now toss on a intake offset< with out cia!

Might as well go on up air and take off them Cadillac converters

So is that spot in the pipe before the muffler or after?

What size bolt did you get for it?

Is it loud in the cab

Mine won’t spin

About to do this to my 09

What size bolts did you use?

I did this & my truck sounds badass but this morning I turned it on & I was gonna leave & my truck kept turning off, do you know what’s wrong?

Anyone do this with a 2015 Silverado?

3:40 me with the roll down windows

Help the bolts wont loosen

Ima do it on my old shit box

what about fuel consumption ?

How long did you have it like this for?

lol you cannot do this without consequences. Most chevys in 2015 and up have a AMF system that runs through it. Unless you have a scanner to disable it the truck will not even idle correctly which in turn will give the MAP sensor a wrong reading. This is also runs concurrent with your transmission as well believe it or not. Might run good for a little while.

It increases fuel consumption? Sirr.....??

Does this mess with the transmission or anything in that sort?

How hard is it to unbolt them if they haven't been unbolted since 2007

so if i did this couldn’t you just leave a window open so it wouldn’t have an affect on you

10/10 dead. Would not recommend for that reason. Sounds great though

Will you still pass emissions?

Similarly, back in the 60's colored guys would walk around with a blaring, 3 ft. long boom box on their shoulder.

Does this work on saddens?

Cut the muffler off and put a down turn pipe on.

You do this on both sides for dual exhaust right? Lol I feel like this is a dumb question

Why don’t you just use washers

Do you still have it like this?

So is it dangerous if you do it outside? I'm wanting to do it but I keep seeing that even if you do it outside it's still dangerous and dangerous to the passengers in the truck

I have a 13 Sierra and theese bolts are not there

My 2010 doesn’t have that

What is this actually called is there a real name for It

Anyone done it with a 1999 Silverado 1500?

I sprayed mine with wd 40 and then snapped

Hay i just sub to u

It’s better for a truck to have no muffler

Will that work on a 2020 5.3 Trail Boss?

NUTS... sorry, it was bothering me

No shop? Not very true

Just cut the muffler off and be done with it

or just spend $50 to have muffler cut off and straight pipe out back in its place at a muffler shop

IS THIS LEGAL???? In my state we need to get “THE STATE INSPECTION” every year.