How to Manually Clean Printhead on HP Officejet Printers All Models

Рет қаралды 24,796

Bilal's Workshop - Technologist and Vlogger

Жыл бұрын

If your HP OfficeJet printer is producing poor quality prints, streaks or blank lines, it's likely that the printhead needs cleaning. In this video, we'll guide you through the process of manually cleaning the printhead on your HP OfficeJet printer to help restore the quality of your prints.
Firstly, ensure that your printer is switched off and unplugged from the power supply. Then, carefully remove the ink cartridges from the printer and set them aside. Next, locate the printhead assembly and gently remove it from the printer.
To clean the printhead, you'll need a soft lint-free cloth and distilled water. Dampen the cloth with the distilled water and gently wipe the printhead to remove any dried ink or debris. Be careful not to touch the nozzles or electrical contacts on the printhead.
After cleaning the printhead, allow it to air dry for a few minutes before reinserting it back into the printer. Reinstall the ink cartridges and power on the printer. Finally, print a test page to ensure that the printhead is functioning properly and producing high-quality prints.
In summary, cleaning the printhead on your HP Officejet printer is a simple process that can be done manually. With the right tools and careful handling, you can restore your printer's functionality and produce high-quality prints once again.
HP Officejet 9025
HP Officejet 9015
HP Officejet Pro 9013
HP Officejet Pro 9023
HP Officejet Pro 9015
HP Officejet Pro 7720
HP Officejet Pro 7740
Subscribe To My Channel www.youtube.com/@bilalkhalid/...
Thank You!
Bilal's Workshop - Technologist and Vlogger
@BilalKhalid
bilalk.com/bilal/

Пікірлер: 35

@gilliberable Жыл бұрын

Very helpful, thank you!

@Pzizle 6 ай бұрын

This worked like a charm. Thank you!!

@BilalKhalid 6 ай бұрын

Glad it helped!

@GarrettJobgen 5 ай бұрын

Worked perfectly! Thanks!

@BilalKhalid 5 ай бұрын

Glad it helped!

@ahmadkhalidhotak4348 Ай бұрын

My first ever printer has been fixed with this method, i was thinking to clean it by something else, but the warm water did the job done without any headaches. Thank you Bilal bro. It was a great and informative video. Can you also tell if we can fill these cartridges after they are used ? and if so a video will be great on this also.

@BilalKhalid Ай бұрын

Glad it helped

@ahmadkhalidhotak4348 29 күн бұрын

@@BilalKhalid Can we refill those cartridges before they are completely depleted ?

@anthonyvasquez5642 Ай бұрын

GREAT VIDEO!! WORKED FOR ME

@carolinemeza7510 Ай бұрын

What is the size of the tubing that you used? I want to try this on my printer. Thank you,

@svendiers6537 5 ай бұрын

Was a good Video now i know how to clean my printer thx

@carolinemeza7510 Ай бұрын

Great Video!

@thebohemianmasta 3 ай бұрын

Thank you! This should help me out a lot! My paper feed gear broke, and it took my awhile to finally fix it. (Had to take the whole printer apart) By then all the ink was shot. I am about to clean it now. I will let you know if it works here in a minute. Here's one for the Technological Blogger!

@BilalKhalid 3 ай бұрын

All the best

@thebohemianmasta 3 ай бұрын

I’m letting the head dry out right now. I dried it mostly with q-tips and paper towel. The black wasn’t working at all, but I was able to get a bunch to squirt out.

@BilalKhalid 3 ай бұрын

Hopefully it’ll Work

@thebohemianmasta 3 ай бұрын

I tried it and the printer said that one of the ink cartridges wasn’t working and needed to be replaced. It’s the blue one and that was working fine originally. Could there still be water inside? I have a fan on it now, and will try again later.

@thebohemianmasta 3 ай бұрын

Why would the blue not work? It says there is a problem with the supply system. Try replacing the affected cartridge with a different non-empty, cartridge. It message reappears again, record message and contact support. The problem cartridge is the cyan one. 🤷‍♂️ it was working fine before I cleaned the clogged black with water.

@hopeqing05 11 ай бұрын

Hi, what's the diameter of the soft tube I should buy? Thanks!

@BilalKhalid 11 ай бұрын

Take the pipe from any old epson ink tank printer

@zongsolomon4034 10 ай бұрын

Please my hp printer 8023 shows cartridge problem (yellow). Is my print head clogged

@BilalKhalid 10 ай бұрын

No, just change yellow

@saaguarora 5 ай бұрын

How to open this printer?

@Soniaarora78 Жыл бұрын

My hp office jetpro 8020 series printer not printing, blank paper coming out, ink is full, give some solution

@BilalKhalid Жыл бұрын

Clean printhead

@Soniaarora78 Жыл бұрын

@@BilalKhalid already done, still not working

@user-qf5wc6ek4n 7 күн бұрын

Is it possible to clean with water and not to get stuck

@BilalKhalid 7 күн бұрын

Yes

@cherylyates1841 Ай бұрын

Bought a HP OfficeJet Pro 9025 from Office Max (Floor Model). It first told me that the color cartridges were incompatible. Replaced those 3 with new cartridges, updated the firmware and now it's telling me there is a problem with the supply system and notes the K (Black cartridge) is the problem. I put a brand new one in and it's telling them the same thing. I could see the old one had plenty of ink when I first turned it on. Have removed the printhead several times to see if I could see any issues but alas - no. I don't have an old Epson to pull off a tube to inject water....what else can I use?