How to Manually Program a Yaesu FT-817/818 | Without the need for software!

No video

How to Manually Program a Yaesu FT-817/818 | Without the need for software!

Рет қаралды 13,854

Күн бұрын

In this video I show you how to manually program your Yaesu FT-817 & 818 (also the ND model variants). Storing simplex channels and repeaters to your memory channels, without the need for any software & data cable. Also naming those said channels too!
End screen music by www.Bensound.com
Thanks for watching,
73'
Mike (M7MMC)

Пікірлер: 44

@acestudioscouk-Ace-G0ACE Жыл бұрын

I know you made this 3 years ago Mike but I'm sure I am not the only one who finds it really useful. Thanks.

@OnTheMicwithMike Жыл бұрын

Most appreciated! Thank you.

@aceventuraaceventura2003 3 ай бұрын

Kudos for this video. Every time I have to think of programming anything on the portable transceivers gives me anxiety. This video helped prove that anxieties are now the thing of the past (at least for Yaesu radios that is). Thanks!

@AntonioBarba_TheKaneB 2 жыл бұрын

Unfortunately your video came a few years after I got my radio, it would have helped a lot back then! Still giving you a like so other newbies can see it popping out from the suggested videos.

@Danyulesun Жыл бұрын

Excellent video and perfectly explained, thanks for putting that together. Cheers.

@OnTheMicwithMike Жыл бұрын

Thank you for the kind words, most appreciated indeed. 73’

@mark351 3 жыл бұрын

Thanks for the info. Just got a used 817 and want to try portable QRP. This will get me going on putting a few memories in place.

@trohear4 3 жыл бұрын

Brilliant video Mike just had the 818 delivered today so I think I will be following your programming video kind regards Alan M6RFO. also, I am in the second week of my 2E0 online training.

@OnTheMicwithMike 3 жыл бұрын

Many thanks Alan, best of luck with the intermediate, I’m reading through the intermediate book myself but keep losing interest lol. All the best and stay safe.

@trohear4 3 жыл бұрын

@@OnTheMicwithMike And you Mike so far I have used a new black ink cartridge in a week printing of the paperwork. LOL for the exam.

@timg5tm941 4 жыл бұрын

Very useful Mike thanks for doing this 73

@OnTheMicwithMike 4 жыл бұрын

Thanks Tim! just thought it would be of some use to new 817/818 users :) 73' mate.

@chrisblue1515 Жыл бұрын

Thanks Mike! Good vid! 73

@mkzfqh 3 жыл бұрын

Thank you I am now ready to move forward- extreme newb here -subscribed!

@OnTheMicwithMike 3 жыл бұрын

Welcome and thank you for the sub, it’s very much appreciated.

@jmarfacio2 9 ай бұрын

Excelente !!! 👏🏻👏🏻👏🏻 muchas gracias

@binoykv 3 жыл бұрын

excellent helped a lot for programming 73's

@OnTheMicwithMike 3 жыл бұрын

Glad it was of some help. Thank you and stay safe 73’

@sean-2e0xbt57 4 жыл бұрын

Fab radio, great video Mike .. Wont ever part with my 817 ;) - 73

@OnTheMicwithMike 4 жыл бұрын

neither will I mate haha. Windcamp battery and the Wonderwand widebander antenna system I wouldn't part with any of the kit :)

@sean-2e0xbt57 4 жыл бұрын

Same here apart from the windcamp 👍dont use it enough to warrant that batt pack 😁

@andrewbaughman2248 3 жыл бұрын

Again your video is a fantastic help. Thanks much. Kc3pzc 73

@OnTheMicwithMike 3 жыл бұрын

Thank you Andrew, very much appreciated indeed. 73’ and stay safe.

@marksavage4189 3 жыл бұрын

Thanks. I will try to follow those instructions to programme in my local repeaters. The manual doe the FT818ND doesnt make it so straightforward!!

@kevballard1967 Жыл бұрын

Great vid. But I have had a stroke and it's really hard for me. I haven't program one thing yet. Its so bloody hard for me. But great vid.

@frankcrawford7505 2 жыл бұрын

Excellent thank you nice and slow

@Yance_000 2 жыл бұрын

Just got this radio but when I try to make an offset, nothing happens. The a button works but it isn't letting me make an offset when I hit it on RPT. Any suggestions?

@alvarogaitan2529 3 жыл бұрын

thanks very much help my a lot terrific job 73 from kb2uew

@raymitchell2965 3 жыл бұрын

subscribed

@paullangfield5291 3 жыл бұрын

Thanks for you hard work, great job, the manual is not that easy to follow. Cheers

@OnTheMicwithMike 3 жыл бұрын

Thank you Paul, I do very much appreciate the feedback. 73’ and stay safe.

@Locksnut 4 жыл бұрын

👍 subscribed

@OnTheMicwithMike 4 жыл бұрын

Thank you, appreciate it 👍🏻

@deenunya7735 3 жыл бұрын

Mike, saw the 430Mhz , does it go beyond to cover the 446 Freqs also Does it just to the 6watts out, if so can it be hooked up to a Amp ? Im not licenced yet ,working on it find your Vids very easy to follow 👍

@OnTheMicwithMike 3 жыл бұрын

Thank you, I do appreciate the kind words. The 817 and 817ND only does 5w but as you mentioned the 6w that’s the newer one, the 818 that does 6w output. I think they struggle to push 5w on the standard battery at best, but most certainly when run from an external power source. The 817 does cover 446 yes, and again yes you can run an amplifier with it. Cheers and beers, stay safe 73’

@philipmaude 4 жыл бұрын

Hi just wanted to ask about CB. On the Furlough scheme and can not do any more gardening so thought about CB. I use Zello but fancy the old way but am not an licenced amature. So my question is in Sussex near Eastbourne is there much activity.

@OnTheMicwithMike 4 жыл бұрын

I think there is but more activity around Brighton towards Worthing.

@mw7gwr580 3 жыл бұрын

Mike, once the repeater shift is set to what you need (for GB3WO here) and stored in a memory slot, if later one the repeater shift was changed, say for a 2m shift etc etc I presume the memory channel still holds the 7.6 shift you set it for on that memory channel?

@OnTheMicwithMike 3 жыл бұрын

Yes you’d have to program it again.

@VE3UET 3 жыл бұрын

Great, how do you program for frequency readout on memory channels instead of reading the channel number twice M-003 and CH-003, this setting in kinda dumb

@OnTheMicwithMike 3 жыл бұрын

You can simply change the memory ‘tag’ to show frequency read out in settings. Press function ‘F’ and rotate the select knob until you see ‘MW, MC and TAG’ on the bottom row. Just press TAG to change from memory channel readout to frequency readout.